Getting to know Rosetta's comet

Getting to know Rosetta’s comet
A section of the smaller of Comet 67P/Churyumov–Gerasimenko’s two lobes as seen through Rosetta’s narrow-angle camera from a distance of about 8 km to the surface on 14 October 2014. The resolution is 15 cm/pixel. The image is featured on the cover of 23 January 2014 issue of the journal Science. Credit: ESA/Rosetta/MPS for OSIRIS Team MPS/UPD/LAM/IAA/SSO/INTA/UPM/DASP/IDA

Rosetta is revealing its host comet as having a remarkable array of surface features and with many processes contributing to its activity, painting a complex picture of its evolution.

In a special edition of the journal Science, initial results are presented from seven of Rosetta's 11 science instruments based on measurements made during the approach to and soon after arriving at Comet 67P/Churyumov–Gerasimenko in August 2014.

The familiar shape of the dual-lobed comet has now had many of its vital statistics measured: the small lobe measures 2.6 × 2.3 × 1.8 km and the large lobe 4.1 × 3.3 × 1.8 km. The total volume of the comet is 21.4 km3 and the Radio Science Instrument has measured its mass to be 10 billion tonnes, yielding a density of 470 kg/m3.

By assuming an overall composition dominated by water ice and dust with a density of 1500–2000 kg/m3, the Rosetta scientists show that the comet has a very high porosity of 70–80%, with the interior structure likely comprising weakly bonded ice-dust clumps with small void spaces between them.

The OSIRIS scientific camera, has imaged some 70% of the surface to date: the remaining unseen area lies in the southern hemisphere that has not yet been fully illuminated since Rosetta's arrival.

The scientists have so far identified 19 regions separated by distinct boundaries and, following the ancient Egyptian theme of the Rosetta mission, these regions are named for Egyptian deities, and are grouped according to the type of terrain dominant within.

Five basic – but diverse – categories of terrain type have been determined: dust-covered; brittle materials with pits and circular structures; large-scale depressions; smooth terrains; and exposed more consolidated ('rock-like') surfaces.

Much of the northern hemisphere is covered in dust. As the comet is heated, ice turns directly into gas that escapes to form the atmosphere or coma. Dust is dragged along with the gas at slower speeds, and particles that are not travelling fast enough to overcome the weak gravity fall back to the surface instead.

Some sources of discrete jets of activity have also been identified. While a significant proportion of activity emanates from the smooth neck region, jets have also been spotted rising from pits.

The gases that escape from the surface have also been seen to play an important role in transporting dust across the surface, producing dune-like ripples, and boulders with 'wind-tails' – the boulders act as natural obstacles to the direction of the gas flow, creating streaks of material 'downwind' of them.

Getting to know Rosetta’s comet
The 19 regions identified on Comet 67P/Churyumov–Gerasimenko are separated by distinct geomorphological boundaries. Following the ancient Egyptian theme of the Rosetta mission, they are named for Egyptian deities. They are grouped according to the type of terrain dominant within each region. Five basic categories of terrain type have been determined: dust-covered (Ma’at, Ash and Babi); brittle materials with pits and circular structures (Seth); large-scale depressions (Hatmehit, Nut and Aten); smooth terrains (Hapi, Imhotep and Anubis), and exposed, more consolidated (‘rock-like’) surfaces (Maftet, Bastet, Serqet, Hathor, Anuket, Khepry, Aker, Atum and Apis). Credit: ESA/Rosetta/MPS for OSIRIS Team MPS/UPD/LAM/IAA/SSO/INTA/UPM/DASP/IDA

The dusty covering of the comet may be several metres thick in places and measurements of the surface and subsurface temperature by the Microwave Instrument on the Rosetta Orbiter, or MIRO, suggest that the dust plays a key role in insulating the comet interior, helping to protect the ices thought to exist below the surface.

Small patches of ice may also be present on the surface. At scales of 15–25 m, Rosetta's Visible, InfraRed and Thermal Imaging Spectrometer, or VIRTIS, finds the surface to be compositionally very homogenous and dominated by dust and carbon-rich molecules, but largely devoid of ice. But smaller, bright areas seen in images are likely to be ice-rich. Typically, they are associated with exposed surfaces or debris piles where collapse of weaker material has occurred, uncovering fresher material.

On larger scales, many of the exposed cliff walls are covered in randomly oriented fractures. Their formation is linked to the rapid heating–cooling cycles that are experienced over the course of the comet's 12.4-hour day and over its 6.5-year elliptical orbit around the Sun. One prominent and intriguing feature is a 500 m-long crack seen roughly parallel to the neck between the two lobes, although it is not yet known if it results from stresses in this region.

Some very steep regions of the exposed cliff faces are textured on scales of roughly 3 m with features that have been nicknamed 'goosebumps'. Their origin is yet to be explained, but their characteristic size may yield clues as to the processes at work when the comet formed.

And on the very largest scale, the origin of the comet's overall double-lobed shape remains a mystery. The two parts seem very similar compositionally, potentially favouring the erosion of a larger, single body. But the current data cannot yet rule out the alternative scenario: two separate comets formed in the same part of the Solar System and then merged together at a later date.

This key question will be studied further over the coming year as Rosetta accompanies the comet around the Sun.

How to grow an atmosphere

Their closest approach to the Sun occurs on 13 August at a distance of 186 million kilometres, between the orbits of Earth and Mars. As the comet continues to move closer to the Sun, an important focus for Rosetta's instruments is to monitor the development of the comet's activity, in terms of the amount and composition of gas and dust emitted by the nucleus to form the coma.

Images from the scientific and navigation cameras have shown an increase in the amount of dust flowing away from the comet over the past six months, and MIRO showed a general rise in the comet's global water vapour production rate, from 0.3 litres per second in early June 2014 to 1.2 litres per second by late August. MIRO also found that a substantial portion of the water seen during this phase originated from the comet's neck.

Getting to know Rosetta’s comet
Features in the Hapi region show evidence of local gas-driven transport producing dune-like ripples (left) and boulders with ‘wind-tails’ (right) – where the boulder has acted as a natural obstacle to the direction of the gas flow, creating a streak of material ‘downwind’ of it. The images were taken with the OSIRIS narrow-angle camera on 18 September 2014. Credits: ESA/Rosetta/MPS for OSIRIS Team MPS/UPD/LAM/IAA/SSO/INTA/UPM/DASP/IDA

Water is accompanied by other outgassing species, including carbon monoxide and carbon dioxide. The Rosetta Orbiter Spectrometer for Ion and Neutral Analysis, ROSINA, is finding large fluctuations in the composition of the coma, representing daily and perhaps seasonal variations in the major outgassing species. Water is typically the dominant outgassing molecule, but not always.

By combining measurements from MIRO, ROSINA and GIADA (Rosetta's Grain Impact Analyzer and Dust Accumulator) taken between July and September, the Rosetta scientists have made a first estimate of the comet's dust-to-gas ratio, with around four times as much mass in dust being emitted than in gas, averaged over the sunlit nucleus surface.

However, this value is expected to change once the comet warms up further and ice grains – rather than pure dust grains – are ejected from the surface.

GIADA has also been tracking the movement of dust grains around the comet, and, together with images from OSIRIS, two distinct populations of dust grains have been identified. One set is outflowing and is detected close to the spacecraft, while the other family is orbiting the comet no closer than 130 km from the spacecraft.

Getting to know Rosetta’s comet
Local bright spots, less than 10 m across (labelled) and seen in an alcove in the Hathor region are compositionally distinct from the surrounding terrain. The image was taken by the OSIRIS narrow-angle camera on 7 August 2014. Credit: ESA/Rosetta/MPS for OSIRIS Team MPS/UPD/LAM/IAA/SSO/INTA/UPM/DASP/IDA

It is thought that the more distant grains are left over from the comet's last closest approach to the Sun. As the comet moved away from the Sun, the gas flow from the comet decreased and was no longer able to perturb the bound orbits. But as the gas production rate increases again over the coming months, it is expected that this bound cloud will dissipate. However, Rosetta will only be able to confirm this when it is further away from the comet again – it is currently in a 30 km orbit.

As the gas–dust coma continues to grow, interactions with charged particles of the solar wind and with the Sun's ultraviolet light will lead to the development of the comet's ionosphere and, eventually, its magnetosphere. The Rosetta Plasma Consortium, or RPC, instruments have been studying the gradual evolution of these components close to the comet.

Getting to know Rosetta’s comet
OSIRIS images of Comet 67P/Churyumov–Gerasimenko showing the details of a 500 m-long crack running through the Hapi region. A context image showing the smooth, boulder-strewn Hapi region and the Hathor cliff face to the right is shown in the top left panel. The bottom-left panel indicates the crack extending across Hapi and beyond. The right panel shows the crack where it leaves Hapi and extends into Anuket, with Seth at the uppermost left and Hapi in the lower left. Credit: ESA/Rosetta/MPS for OSIRIS Team MPS/UPD/LAM/IAA/SSO/INTA/UPM/DASP/IDA

"Rosetta is essentially living with the comet as it moves towards the Sun along its orbit, learning how its behaviour changes on a daily basis and, over longer timescales, how its activity increases, how its surface may evolve, and how it interacts with the solar wind," says Matt Taylor, ESA's Rosetta project scientist.

"We have already learned a lot in the few months we have been alongside the comet, but as more and more data are collected and analysed from this close study of the we hope to answer many key questions about its origin and evolution."

  • Getting to know Rosetta’s comet
    Close-ups of a curious surface texture nicknamed ‘goosebumps’. The characteristic scale of all the bumps seen on Comet 67P/Churyumov–Gerasimenko by the OSIRIS narrow-angle camera is approximately 3 m, extending over regions greater than 100 m. They are seen on very steep slopes and on exposed cliff faces, but their formation mechanism is yet to be explained. Credit: ESA/Rosetta/MPS for OSIRIS Team MPS/UPD/LAM/IAA/SSO/INTA/UPM/DASP/IDA
  • Getting to know Rosetta's comet
    Summary of properties of Comet 67P/Churyumov–Gerasimenko, as determined by Rosetta’s instruments during the first few months of its comet encounter. The full range of values are presented and discussed in a series of papers published in the 23 January 2015 issue of the journal Science. Credit: ESA

More information: Rosetta scientific results are available in the Science magazine special edition: www.sciencemag.org/content/347 … 220.toc#SpecialIssue

Journal information: Science

Citation: Getting to know Rosetta's comet (2015, January 23) retrieved 18 April 2024 from https://phys.org/news/2015-01-rosetta-comet.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Image: Rosetta selfie 16 km from comet

35 shares

Feedback to editors