Technical troubleshooting at the CERN Control Centre

August 5, 2014 by Stephanie Hills
Chris Wetton of CERN's Technical Infrastructure Operation group keeps a keen eye on the monitors at the CERN Control Centre. Credit: Stephanie Hills

If a technical alert goes off at CERN, it will almost certainly show up on one of Chris Wetton's 15 screens in the CERN Control Centre. Wetton is a member of the Technical Infrastructure Operation group, an eight-strong team that works 24/7 to monitor all the services for CERN's accelerator complex. A system of sensitive triggers throughout the complex sends an alert as soon as any deviation is detected so the team can react quickly.

The bank of screens is intimidating – there are screens with schematic diagrams and synoptics of the electrical network, and on others, lines of text in different colours indicate the priority level of an alert from zero (white/grey – information only) to three (red – requiring immediate intervention from the Fire Service). Fortunately there are no red lines – the screens are mostly yellow indicating level two technical issues, and after nearly 10 years in the job, Wetton quickly scans the screens to calmly assess what is going on.

"We monitor everything from the fire alarms, gas, heating and ventilation systems to the evacuation systems and automatic doors," he says. "If an alert goes off, we identity the problem and then try to fix it."

Wetton says that level two alerts are the most common during a technical stop when people are working on the machines. "We need to know who is working where, what they're doing, and what alerts they might trigger. Most people will call us up before they start, but not always," he says. "When the accelerators are working it's reasonably calm, but at the moment, we're taking 200-280 phone calls every day."

During CERN's first long shutdown (LS1) in 2013, a staggering 1.8M alerts were registered (doubling the total from 2012). Each one had to be dealt with. During normal operations, there is one person on shift, but for LS1, the team has needed extra resources and volunteers were recruited from other parts of CERN to assist the team. The experience has given them a valuable insight into the complexities of CERN and its operations.

Having such an in-depth knowledge of CERN means that the team is often seen as the first point of contact for troubleshooting any incident whether it involves the accelerator complex or not, and this can have its lighter moments; "A few days ago we took a call advising us that the sheep that graze some of the land inside the main CERN site had escaped. Sorting out livestock definitely isn't our responsibility, but actually we do have the farmer's phone number, and we did solve the problem!"

Aside from farming, Wetton and his colleagues come from a variety of professional backgrounds – cryogenics, electrical systems, cargo ships and submarines. He himself started out as an apprentice maintaining high vacuum, radiofrequency, cryogenics and metrology equipment in a semiconductor fabrication cleanroom for Philips. "CERN uses essentially the same technology, just on a huge scale!" he says. "It's the hands-on interventions that I enjoy; we've been given more responsibility and more chances to go on site in LS1 so I hope that will continue."

Explore further: CERN votes to admit Israel as newest full member

Related Stories

X-ray tests: Night at the collider

November 26, 2013

When night falls over Geneva and technicians, engineers and physicists finish their work in the Large Hadron Collider tunnel to go home, Gunter Kniesche and his colleagues take the helm. They are non-destructive testers – ...

CERN announces LHC restart schedule

June 24, 2014

The Large Hadron Collider (LHC), the largest and most powerful particle accelerator in the world, has started to get ready for its second three-year run. Cool down of the vast machine has already begun in preparation for ...

Upgrading the Large Hadron Collider

July 9, 2014

Scientists from the Particle Physics Research Group at the University of Bristol are currently working on upgrades to the Large Hadron Collider (LHC), the particle accelerator and collider located at CERN (the European Organization ...

CERN: World-record current in a superconductor

April 15, 2014

In the framework of the High-Luminosity LHC project, experts from the CERN Superconductors team recently obtained a world-record current of 20 kA at 24 K in an electrical transmission line consisting of two 20-metre long ...

Recommended for you

Flexible ferroelectrics bring two material worlds together

January 17, 2017

Until recently, "flexible ferroelectrics" could have been thought of as the same type of oxymoronic phrase. However, thanks to a new discovery by the U.S. Department of Energy's (DOE) Argonne National Laboratory in collaboration ...

First-ever X-ray image capture of material defect process

January 17, 2017

From blacksmiths forging iron to artisans blowing glass, humans have for centuries been changing the properties of materials to build better tools – from iron horseshoes and swords to glass jars and medicine vials.

Theory lends transparency to how glass breaks

January 16, 2017

Over time, when a metallic glass is put under stress, its atoms will shift, slide and ultimately form bands that leave the material more prone to breaking. Rice University scientists have developed new computational methods ...

A novel way to put flame retardant in a lithium ion battery

January 16, 2017

(—A team of researchers at Stanford University has found a novel way to introduce flame retardant into a lithium ion battery to prevent fires from occurring. In their paper published in the journal Science Advances, ...


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.