Soyuz launch site ready for first flight

Soyuz launch site ready for first flight
The Soyuz launch site lies 13 km northwest of the Ariane 5 launch complex. It is divided into the forward zone, with the launch pad, and the rear zone, with the Soyuz preparation building. The two zones are linked by a 600 m railway. The three-stage Soyuz is transferred in a horizontal position to the pad and raised into its launch position. The ‘upper composite’of the upper stage, payload and fairing is then moved to the pad and hoisted on top. The launch site is almost identical to the other Soyuz sites in Kazakhstan and Russia, although adapted to conform to European safety regulations. The most visible difference is the 45 m-tall mobile gantry, which provides a protected environment as payloads are installed on the vertical launcher. Its internal movable work platforms provide access to the Soyuz at various levels. Credit: ESA - S. Corvaja, 2011

(PhysOrg.com) -- The Soyuz site at Europe’s Spaceport in French Guiana is now ready for its first launch. ESA yesterday handed over the complex to Arianespace, marking a major step towards this year’s inaugural flight.

The Soyuz site at Europe’s Spaceport in French Guiana is now ready for its first launch. ESA yesterday handed over the complex to Arianespace, marking a major step towards this year’s inaugural flight.

Construction of the Soyuz site began in February 2007, although initial excavation and ground infrastructure work began in 2005 and 2006, respectively.
Russian staff arrived in French Guiana in mid-2008 to assemble the launch table, mobile gantry, fuelling systems and test benches.

The first two Soyuz launchers arrived from Russia by sea in November 2009 to be assembled in the new preparation and integration building.

The French space agency, CNES, as prime contractor for the building work, along with its European and Russian partners, has spent recent months qualifying the site – known as Ensemble de Lancement Soyuz, or ELS for short.

The tests covered all the mechanical, fluid and electrical elements, such as the pad’s umbilical arms and fuelling vehicles, and all the buildings, including the launch control centre that will house the combined European and Russian teams.

The ‘acceptance review’ this week declared that the site is ready for its first rocket. At the same time CNES handed over the facilities to ESA.

The last step this week was ESA’s hand-over to Arianespace.

Main features of the Soyuz site

The launch site is almost identical to the other Soyuz sites in Kazakhstan and Russia, although adapted to conform to European safety regulations.

The most visible difference is the 45 m-tall mobile gantry, which provides a protected environment as payloads are installed on the vertical launcher. Its internal movable work platforms provide access to the Soyuz at various levels.

What’s next?

From now on Arianespace is responsible for the Soyuz launch site and will begin the campaign this month to qualify its launch operations.

A launch rehearsal will ensure that the Soyuz and the new facilities work together perfectly, while allowing the teams to train under realistic launch conditions.

This simulated launch campaign will include the vehicle’s transfer to the launch zone, its erection into the vertical position, its installation on the pad, and the testing of ground and launcher interfaces.

These final tests will give the green light for the first Soyuz flight from French Guiana in the third quarter of 2011.


Explore further

First Soyuz launch from Europe's space base for last quarter 2010

Citation: Soyuz launch site ready for first flight (2011, April 1) retrieved 23 September 2021 from https://phys.org/news/2011-04-soyuz-site-ready-flight.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
0 shares

Feedback to editors