The power of 'random': 'Seemingly loopy' technique could dramatically improve communications networks

February 9, 2010 by Larry Hardesty
Graphic: Christine Daniloff

A radical new approach to the design of communications networks, called "network coding," promises to make Internet file sharing faster, streaming video more reliable, and cell-phone reception better -- among other improvements.

MIT is in the thick of these new developments. Last year, MIT researchers shared in two awards from IEEE, formerly the Institute of Electrical and Electronics Engineers, for papers that made vital contributions to the field of network coding.

“Most networks right now are built roughly along the same principles as a transportation network, or any other network that’s trying to deliver tangible goods,” says Muriel Médard, a professor in the Research Laboratory of Electronics who was a coauthor on both papers. A packet of data traveling across the Internet, for instance, passes through a series of devices called routers before it reaches its destination. A router doesn’t tamper with the packet’s contents; it just sends it on to the next router.

This is the first article in a two-part series on MIT contributions to the fledgling field of network coding. (part two is available here).
With network coding, however, a router doesn’t just hand off the packets it receives; it mathematically combines them into new, hybrid packets. If the combination is done cleverly enough, this makes the whole network more efficient.

To see how this might work, suppose that we’re at a coffee shop with our laptops. I’m trying to send you a message over the coffee shop’s WiFi connection at the same time you’re trying to send me a message. Ordinarily, my message will travel to the coffee shop’s wireless router, and then the router will send it to you. Your message will travel to the router, and then the router will send it to me. That’s four total transmissions. But if, instead of forwarding our messages, the router combines them and broadcasts the combination, there are only three total transmissions. Since you have a copy of the message you sent me, you can subtract it from the combination, and I can do the same with the message I sent you. If our laptops and the router do a little extra processing, they reduce the system’s bandwidth consumption by 25 percent.

Of course, this example assumes that the receivers already have the data they need to decode the combination, which is rarely the case in the real world. And data traveling over a network usually pass through a number of routers: if each of those routers is recombining packets that are already combinations themselves, the decoding process becomes much more complicated. But in principle, there’s a way to get it all to work.

Cracked code

Network coding was born around 1999 or 2000, in a couple of papers that suggested that combining data at routers could improve network efficiency. But how that combination should be done, and what kinds of efficiency gains were possible, were unclear.

Then, in 2003, Médard, her grad student Tracey Ho (who’s now at Caltech), MIT professor of electrical engineering David Karger, and colleagues at the University of Illinois and Caltech proved a counterintuitive result: in many cases, the best way to combine data at a router is to do it randomly.

Today, cell phones and computers send messages digitally: every message is a sequence of 0s and 1s. But any sequence of 0s and 1s can be thought of as a single number. With random network coding, a router receives, say, three messages, multiplies each of them by a different, randomly selected number, and adds the results together. That final sum is the new, hybrid message. The router sends the hybrid on to the next in the network — but it also includes information about the three random numbers it used to produce the hybrid.

Random coding yields the biggest gains in networks where connections are spotty, but where there are several possible routes between sender and receiver. Suppose, for instance, that you’re in a densely populated city with good cell-phone coverage. You’re within range of several different cell towers, but you’re inside a building that’s interfering with your transmissions. Your cell phone is sending out lots of packets of data, but there’s not one nearby cell tower that’s receiving all of them. If each tower simply “hybridizes” the packets it receives and sends them on, then as long as the recipient gets enough hybrids from enough different towers, it can reconstruct the original message.

Ho, Médard, and their colleagues proved mathematically that if the same group of messages was sent to several different receivers, random coding made the most efficient possible use of the network’s bandwidth.

“The idea is seemingly loopy,” Médard says. “I think it’s fair to say that it was greeted with some amount of bemusement in some parts of the community.” As a graduate student, Ho was charged with presenting the findings at a conference in Japan, and her audience was skeptical. “People said, ‘You must be comparing it to bad routing,’” Médard says. Under cross-examination from a room full of seasoned researchers, Médard says, “Anyone else would have just curled into a fetal position.” But Ho, she says, was “cool as a cucumber. She was also the collegiate pistol champion. So the girl can keep her cool.”

The IEEE award last year was an indication that the bemusement had turned to recognition. “It’s a theoretical result, but it has deep practical implications,” says Chris Ramming, director of the Corporate External Research Office for chip manufacturer Intel. Before coming to Intel, Ramming worked for the U.S. Defense Department’s Defense Advanced Research Projects Agency (DARPA). “When I was a program manager at DARPA, we had a big project that used that approach as the core of the implementation techniques,” Ramming says. “It was definitely seminal, and people are trying to build on it. So it’s hugely important.”

The other paper honored by the IEEE last year, and MIT researchers’ continuing work on network coding, will be the subject of part two of this series.

This is the first article in a two-part series on MIT contributions to the fledgling field of network coding. (part two is available here).

Explore further: Netgear Launches A New Family Of Wireless-N Routers

Related Stories

Netgear Launches A New Family Of Wireless-N Routers

September 29, 2008

Netgear today has announced a new family of Wireless-N networking solutions that will make it easy for anyone to upgrade their wireless home network to Wireless-N technology. This new technology supports the simultaneous ...

Search engine picked for China IPv6 router

January 4, 2006

A Silicon Valley firm has been selected to supply network search engines for the first core router of China's IPv6 next-generation Internet Protocol.

Portable D-Link Wireless Pocket Router/AP Smaller than a PDA

August 13, 2004

D-Link, the global leader in consumer network connectivity, today announced the D-Link Wireless Pocket Router/AP, a portable wireless networking solution for business travelers wanting to access and share hotel Internet connections, ...

Recommended for you

New method analyzes corn kernel characteristics

November 17, 2017

An ear of corn averages about 800 kernels. A traditional field method to estimate the number of kernels on the ear is to manually count the number of rows and multiply by the number of kernels in one length of the ear. With ...

Optically tunable microwave antennas for 5G applications

November 16, 2017

Multiband tunable antennas are a critical part of many communication and radar systems. New research by engineers at the University of Bristol has shown significant advances in antennas by using optically induced plasmas ...


Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Feb 09, 2010
But this would most likely require an overhaul of the network-framework of the country (or at least large portions thereof). Maybe we could roll this change into routing protocols when we finally switch to IPv6.
3 / 5 (2) Feb 09, 2010
Their example with the wireless router is poorly written. If they are talking to each other through the router and not going onto a seperate subnet (like the internet through AIM or whatever), then it's called switching. We don't want more CPU involved in switching, because then it becomes more like routing, which is slow.
1 / 5 (2) Feb 09, 2010
So... let's see if I've got this. The machine recieving the hybrid packet performs a math problem looking for 3 numbers whose sum to the hybrid and whose factors include one of the random numbers each. In exchange for some computational power at each end, you are able to save bandwidth by sending 1 packets instead of three - though it would be somewhat bigger than any of the original 3, right?
not rated yet Feb 09, 2010
Routers fail all the time -- as they fail you simply add new hardware, this is not the same as IPv6 which will be a big software issue and only really effect tier 1 routers. But packet switching and the logic of this will be hardwired into the machines not implemented as firmware on top... software is slow.. hardware is fast :-)
not rated yet Feb 09, 2010
The description of the packet combination doesn't make much sense. I don't see how a problem of the form:

a*x + b*y + c*z = s

can be easily solved just by knowing a, b, c, and s. Is it even guaranteed to have a unique solution? Doesn't appear that way to me...
not rated yet Feb 10, 2010
maybe this will be useful when you are going to build a new network, but implementing it in current networks is not going to work.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.