Equivalence principle in space test

May 11, 2009
Equivalence principle in space test
The "Microscope" space project will check the equivalence principle of inert and heavy mass with so far unequalled accuracy. The test masses for the acceleration experiments have (in the case of the external cylinders) a length of 80 mm and an inner diameter of 60 mm. The surface roughness is smaller than 0.2 µm. (Image: CNES/PTB)

Since Galileo Galilei and Newton, the assumption is valid that inert and heavy mass are equivalent. This is, however, questioned by new physical theories such as the String theory. Now, the equivalence principle is put to test with so far unachieved accuracy within the scope of the "Microscope" space project -- a German-French cooperation. PTB (Physikalisch-Technische Bundesanstalt, Germany) has developed the manufacturing and measuring methods for the test masses.

The test masses are required for the acceleration experiments in a near-Earth orbit.

Space is the ideal place to check the equivalence of inert and heavy mass with an accuracy impossible under terrestrial conditions. This is why in 2013, the French Space Agency CNES (Centre National d'Etudes Spatiales) will bring a micro satellite in a near-Earth orbit and perform acceleration tests on different test masses. Main items of these tests are pairs of concentrically nested metal cylinders which flow in the satellite in equilibrium between the of the Earth (which acts on the heavy mass of the cylinder) and the centrifugal force (which acts on the inert mass). If the satellite is, however, selectively accelerated, the equilibrium of forces is annulled.

The validity of these acceleration experiments decisively depends on the quality of the test masses used. Only if mass, form, density and thermal expansion of the cylinders are known with great accuracy, can the possibly very small differences between inert and heavy mass be observed anyway.

PTB's Scientific Instrumentation Department has now succeeded in optimizing the manufacturing process for the test masses (made of a standard titan alloy and a very special platinum rhodium alloy) in such a way that the deviations in form and dimensions lie in all three space dimensions of the metal cylinders in the range of 1 µm. This precision represents an enormous technical challenge in which the theoretical production limits of the usable manufacturing machines were almost reached. This is why a comprehensive measuring technique had to be integrated into the processing station.

The prototypes manufactured so far were checked by the respective technical laboratories of PTB. They meet the accuracy aimed at and will be used in the Centre of Applied Space Technology and Microgravitation (ZARM) in Bremen - a coo-peration partner in the project - for measurements in the drop tower which are performed before the orbital experiment is carried out. After evaluation of these measurements, PTB will manufacture the actual test masses for the satellite experiments

Source: Physikalisch-Technische Bundesanstalt

Explore further: Testing the Equivalence Principle

Related Stories

Testing the Equivalence Principle

May 21, 2007

Standing on the Moon in 1971, Apollo 15 astronaut Dave Scott held his hands out at shoulder height, a hammer in one hand and a feather in the other. And as the world looked on via live television, he let go.

Error message! How mobile phones distort measurements

September 17, 2008

Nowadays we don't only take measurements with simple measuring devices, but also with whole measuring systems. These are very complex and are completely set up from their component parts at the point of use. Vehicle scales ...

The day LISA Pathfinder hung in the balance

October 11, 2006

At the core of ESA's LISA Pathfinder mission sit two small hearts. Each is a cube, just 5 centimetres across. Together they will allow LISA Pathfinder to lay the foundations for future space-based measurements that investigate ...

Measuring the density of ultra-pure water

December 18, 2007

For oceanography – and there in particular for the description of ocean currents – accurate measurements of the density of sea water are of great importance. For this purpose, measuring instruments are needed which reach ...

Optical Atomic Clock: A long look at the captured atoms

February 5, 2008

Optical clocks might become the atomic clocks of the future. Their "pendulum", i.e. the regular oscillation process which each clock needs, is an oscillation in the range of the visible light. As its frequency is higher than ...

Recommended for you

On the rebound

January 22, 2018

Our bodies have a remarkable ability to heal from broken ankles or dislocated wrists. Now, a new study has shown that some nanoparticles can also "self-heal" after experiencing intense strain, once that strain is removed.

Nanoparticle gel controls twisted light with magnetism

January 22, 2018

"Help me, Obi Wan Kenobi. You're my only hope." For many of those around at the release of Star Wars in 1977, that scene was a first introduction to holograms—a real technology that had been around for roughly 15 years.

Information engine operates with nearly perfect efficiency

January 19, 2018

Physicists have experimentally demonstrated an information engine—a device that converts information into work—with an efficiency that exceeds the conventional second law of thermodynamics. Instead, the engine's efficiency ...

Team takes a deep look at memristors

January 19, 2018

In the race to build a computer that mimics the massive computational power of the human brain, researchers are increasingly turning to memristors, which can vary their electrical resistance based on the memory of past activity. ...


Adjust slider to filter visible comments by rank

Display comments: newest first

May 11, 2009
This comment has been removed by a moderator.
5 / 5 (2) May 12, 2009
"Since Galileo Galilei and Newton, the assumption is valid that inert and heavy mass are equivalent"...
Some of the worst science writing I have ever read.
It should read " inertial and gravitational mass".
Their equivalence is the backbone of general relativity. If I want to learn more about this `Microscope' project, I'll hit the arxiv, thank you.
not rated yet May 12, 2009
Welp, I hope for the theorists' sake the experimental data falls within the margin of error. ;)

Then again, I suppose it would be interesting to see how fast a patch is applied and where it comes from.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.