White vans goes green: Novel spoiler design reduces fuel consumption

November 10, 2008

As if the drivers of mini vans and utility vehicles needed any more encouragement to drive fast between jobs, US researchers have designed a new rear spoiler for bluff-backed vehicles that can reduce drag and lift significantly. Writing in the International Journal of Vehicle Design, the team describes how the new spoiler could improve fuel consumption as well as vehicle handling.

Inchul Kim of Metacomp Technologies, in Agoura Hills, California, working with Xin Geng and Hualei Chen of the University of Michigan-Dearborn, explain that a traveling vehicle experiences two main aerodynamic forces.

The first is drag, or air resistance, and is in the opposite direction to the movement. The second force is lift, which is perpendicular to the drag and to the road.

The greater the drag, the more energy is needed to propel the vehicle and so the more fuel that it uses to cover the same ground at a given speed. Lift reduces the amount of friction between the tires and the road and so lowers traction. This also reduces efficiency as well as deleteriously affecting handling.

Kim and colleagues have used the principles of fluid dynamics, which were first developed in the nineteenth century, to create a computer model of a moving mini-van, on which they could test a spoiler design for the twenty-first century.

"The scientific principle and geometry of the new rear-spoiler are completely different from those of conventional spoilers that have been used so far," the researchers explain. Conventional spoilers resemble an inverted plane wing and generally working by increasing the downward force on the back of the vehicle as well as improving the flow of air across the bluff rear. The new rear spoiler resembles a wave in profile rather than a wing and acts like a diffuser when it is attached to the back of a vehicle. The air pressure on the back of a vehicle with the new spoiler is higher than that on the back of a vehicle without it, the researchers explain.

The team's calculations suggest that the spoiler can reduce drag by 5% and switch lift from positive to negative at 67 mph. Given that more than two-thirds of a vehicle's power is consumed overcoming drag at highway driving speeds, this could translate into a significant fuel saving of up to several miles per gallon. This could amount to a saving of several hundred dollars a year depending on mileage as well as a concomitant reduction in carbon emissions.

Equally, however, the increase in vehicle power could be exploited by an unscrupulous driver to push the mini-van to the speed limit.

"The new rear spoiler can be applied to other minivans, vans, sports-utility-vehicles and buses," the team says, "With the new spoiler attached, the vehicles having a bluff back would have not only a higher mileage but also better stability." The researchers are currently optimizing the design for further performance improvements.

Source: Inderscience Publishers

Explore further: Cars: A brand-by-brand look at new 2017 models

Related Stories

Cars: A brand-by-brand look at new 2017 models

September 6, 2016

With the new models that automakers are rolling out for 2017, you can wrap yourself in luxury, get thrown back in your seat with the thrill of high horsepower, sit high in an SUV or load your stuff into a functional new hatchback.

Change in geometry improves aerodynamics

December 23, 2013

Kids and dogs understand the force of air, when they stick their hands and heads out of moving cars only to feel them pushed back. It may be invisible, but air is like a see-through net dragging a vehicle back as it strains ...

Recommended for you

Google, EU dig in for long war

July 20, 2017

Google and the EU are gearing up for a battle that could last years, with the Silicon Valley behemoth facing a relentless challenge to its ambition to expand beyond search results.

Strengthening 3-D printed parts for real-world use

July 20, 2017

From aerospace and defense to digital dentistry and medical devices, 3-D printed parts are used in a variety of industries. Currently, 3-D printed parts are very fragile and only used in the prototyping phase of materials ...

Swimming robot probes Fukushima reactor to find melted fuel

July 19, 2017

An underwater robot entered a badly damaged reactor at Japan's crippled Fukushima nuclear plant Wednesday, capturing images of the harsh impact of its meltdown, including key structures that were torn and knocked out of place.

5 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

drel
5 / 5 (2) Nov 10, 2008
Equally, however, the increase in vehicle power could be exploited by an unscrupulous driver to push the mini-van to the speed limit.

God forbid someone drives the speed limit!
Falcon
5 / 5 (3) Nov 10, 2008
school bus with spoiler, that's one hell of a mental picture! lol
dbren
2.5 / 5 (2) Nov 10, 2008
Since most of the people who drive these vans professionally are paid by the hour, the prospect of such a driver "push[ing] the mini-van to the speed limit" is remote.
holmstar
4 / 5 (2) Nov 10, 2008
so where is the photo of this thing? The article is rather worthless without a photo.
TJ_alberta
4.5 / 5 (2) Nov 11, 2008
http://www.metacomptech.com/
holmstar: check out the company website. they are a software company.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.