True properties of carbon nanotubes measured

August 15, 2008

For more than 15 years, carbon nanotubes (CNTs) have been the flagship material of nanotechnology. Researchers have conceived applications for nanotubes ranging from microelectronic devices to cancer therapy. Their atomic structure should, in theory, give them mechanical and electrical properties far superior to most common materials.

Unfortunately, theory and experiments have failed to converge on the true mechanical properties of CNTs. Researchers at Northwestern University recently made the first experimental measurements of the mechanical properties of carbon nanotubes that directly correspond to the theoretical predictions.

Carbon nanotubes are cylindrical structures usually less than 30 nanometers in diameter and several microns long. Their small size makes them very strong but at the same time quite difficult to test individually; as a result, experiments typically deviate widely from predictions based on quantum mechanics.

"Imaging and measurement resolutions as well as atomic structural ambiguities (defects) obscured the results of most experiments and provided unreliable mechanical predictions," said Horacio Espinosa, a professor of mechanical engineering at Northwestern's McCormick School of Engineering and Applied Science.

Espinosa and his group at Northwestern have resolved these issues using a nanoscale material testing system based on microelectromechanical system (MEMS) technology. This system allows electronic measurements of load and displacement during a test, which is performed inside a transmission electron microscope to provide real-time atomic imaging.

"This method removes all ambiguity from testing results," Espinosa said. "We can be certain of all the quantities we have measured, and the results match quantum mechanics predictions very well."

Espinosa collaborated with George Schatz, Morrison Professor of Chemistry in Northwestern's Weinberg College of Arts and Sciences, as well as with Peter Zapol, a physicist at Argonne National Laboratory. This work is published online in Nature Nanotechnology and will appear in print in the journal's October issue.

Further research also was reported in the same article regarding the effect of electron irradiation on these materials. One would think that irradiation would degrade the atomic structure of the material, but the researchers found the opposite.

"Irradiating a multiwalled carbon nanotube with an intense electron beam actually forms bonds among the shells of the tube. This is like combining multiple nanotubes into one to form a stronger structure," said lead author Bei Peng, who recently received his doctoral degree from Northwestern under Espinosa's supervision.

This phenomenon also has been theorized in the past, and the research confirms that the properties of multiwalled nanotubes can easily and controllably be altered by electron irradiation.

The irradiation work was supplemented by detailed atomistic modeling. Using computer simulations of the atomic structure of the nanotubes, the team of researchers was able to isolate the mechanism of strengthening due to irradiation.

"The same procedure used to strengthen individual multiwalled nanotubes by irradiation may also be used to link together individual nanotubes into a bundle," said Mark Locascio, a doctoral student co-author of the paper.

This mechanism of crosslinking is a promising method for creating much larger nanotube-based structures. When nanotubes are packed together, they typically have very weak interactions along their surfaces; a spun nanotube rope would not be nearly as strong as its nanoscale constituents. However, irradiation may be the key to improving these interactions by inducing covalent bonds between tubes. If the properties of nanotubes can be scaled up to macroscale ropes and fibers, they may become a viable option for any high-strength application. This could include large cables for applications in industry or infrastructure, as well as smaller threads for lightweight woven fabrics, ballistic armors or composite reinforcement.

The Nature Nanotechnology paper was authored by Espinosa, Peng, Locascio, Zapol and Schatz as well as Steven Mielke, a postdoctoral researcher, and Shuyou Li, an electron microscopist, both at Northwestern.

Source: Northwestern University

Explore further: Reusable carbon nanotubes could be the water filter of the future

Related Stories

Inkjet-printed batteries bring us closer to smart objects

May 2, 2017

The race is on to develop everyday objects that have network connectivity and can send and receive data: the so-called 'Internet of Things'. But this requires flexible, lightweight and thin rechargeable power sources. Currently ...

Recommended for you

Injectable plant-based nanoparticles delay tumor progression

June 28, 2017

Researchers from Case Western Reserve University School of Medicine in collaboration with researchers from Dartmouth Geisel School of Medicine and RWTH Aachen University (Germany) have adapted virus particles—that normally ...

A levitated nanosphere as an ultra-sensitive sensor

June 28, 2017

Sensitive sensors must be isolated from their environment as much as possible to avoid disturbances. Scientists at ETH Zurich have now demonstrated how to remove from and add elementary charges to a nanosphere that can be ...

Ruthenium rules for new fuel cells

June 28, 2017

Rice University scientists have fabricated a durable catalyst for high-performance fuel cells by attaching single ruthenium atoms to graphene.

Researchers create very small sensor using 'white graphene'

June 28, 2017

Researchers from TU Delft in The Netherlands, in collaboration with a team at the University of Cambridge (U.K.), have found a way to create and clean tiny mechanical sensors in a scalable manner. They created these sensors ...

3 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

Wardish
not rated yet Aug 15, 2008
Thought for the day.

Any limit to how large the diameter of a cabon nanotube is. I can't think of one and macro sized ones might be quite useful.

Ward
NOM
not rated yet Aug 27, 2008
Just a comment on Neil Farbstein's claim to be researching nanotech.

Farbstein is a fraud. He spams tech websites with wild claims of bogus research by his company Vulvox, that employs only Farbstein himself.

But don't just take my word for it, google Farbstein. It's good for a laugh.
NOM
not rated yet Oct 02, 2008
Oops, looks like Neil Farbstein has had his spam post removed. LOL

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.