Plastic that grows on trees, part two

May 19, 2009

Some researchers hope to turn plants into a renewable, nonpolluting replacement for crude oil. To achieve this, scientists have to learn how to convert plant biomass into a building block for plastics and fuels cheaply and efficiently. In new research, chemists have successfully converted cellulose -- the most common plant carbohydrate -- directly into the building block called HMF in one step.

The result builds upon earlier work by researchers at the Department of Energy's Pacific Northwest National Laboratory. In that work http://phys.org/news101050050.html , scientists produced HMF from simple sugars derived from . In this new work, researchers developed a way to bypass the sugar-forming step and go straight from cellulose to HMF. This simple process generates a high yield of HMF and allows the use of raw cellulose as feed material, the researchers report in an upcoming issue of Applied Catalysis A.

"In biomass like wood, corn stover and switchgrass, cellulose is the most abundant polymer that researchers are trying to convert to biofuels and plastics," said chemist Z. Conrad Zhang, who led the work while at PNNL's Institute for Interfacial Catalysis.

HMF, also known as 5-hydroxymethylfurfural, can be used as a building block for plastics and "biofuels" such as gasoline and diesel, essentially the same fuels processed from crude oil. In previous work, PNNL researchers used a chemical and a solvent known as an ionic liquid to convert the simple sugars into HMF.

The chemical, a metal chloride known as chromium chloride, converted sugar into highly pure HMF. But to be able to feed cellulosic biomass directly from nature, the team still needed to break down cellulose into simple sugars -- Zhang and colleagues wanted to learn how to skip that step.

The ionic liquid has the added benefit of being able to dissolve cellulose, which as anyone who's boiled leafy vegetables knows can be stringy and hard to dissolve. Compounds called catalysts speed up the conversion of cellulose to HMF. After trying different metal chloride catalysts in the ionic solvent, they found a pair of catalysts that worked well: A combination of copper chloride and chromium chloride under 120 degrees Celsius broke down the cellulose without creating a lot of unwanted byproducts.

In additional experiments, the team tested how well their method compared to acid, a common way to break down cellulose. The metal chlorides-ionic liquid system worked ten times faster than the acid and at much lower temperatures. In addition, the paired metal chloride catalysts allowed Zhang's research team to avoid using another compound under investigation, a mineral acid, that is known to degrade HMF.

Optimizing their method, the team found that they could consistently achieve a high yield of HMF -- the method converted about 57 percent of the sugar content in the cellulose feedstock to HMF through this single step process. The team recovered more than 90% of the HMF formed, and the final product from the process was 96% pure.

In addition, the metal chlorides and ionic liquid could be reused multiple times without losing their effectiveness. Being able to recycle the materials will lower the cost of HMF production.

"This paper is a tremendous breakthrough. By combining the cellulose-breakdown and sugar-conversion steps, we are very close to a single-step method of converting raw biomass into a new platform chemical -- a chemical you can readily turn into a transportation fuel or for synthesis of plastics and other useful materials," said PNNL geochemist and study coauthor Jim Amonette. "Advances like this can help reduce our dependence on fossil fuels."

More information: Y. Su, H.M. Brown, X. Huang, X.-d. Zhou, J.E. Amonette, Z.C. Zhang, Single-Step Conversion of Cellulose to 5-Hydroxymethylfurfural (HMF), a Versatile Platform Chemical, Applied Catalysis A, General, doi:10.1016/j.apcata.2009.04.002

Source: Pacific Northwest National Laboratory (news : web)

Explore further: Incorporation of DOPA into engineered mussel glue proteins

add to favorites email to friend print save as pdf

Related Stories

Plastic that grows on trees

Jun 14, 2007

Scientists took a giant step closer to the biorefinery this week, reporting in the June 15 issue of the journal Science that they have directly converted sugars ubiquitous in nature to an alternative source ...

Two-step chemical process turns raw biomass into biofuel

Feb 10, 2009

(PhysOrg.com) -- Taking a chemical approach, researchers at the University of Wisconsin-Madison have developed a two-step method to convert the cellulose in raw biomass into a promising biofuel. The process, which is described ...

New Ways to Use Biomass

Sep 22, 2008

(PhysOrg.com) -- Alternatives to fossil fuels and natural gas as carbon sources and fuel are in demand. Biomass could play a more significant part in the future. Researchers in the USA and China have now developed ...

Fuel from Cellulose

Aug 07, 2008

Independence from fossil fuel exporting nations, a reduction in the release of greenhouse gases, conservation of dwindling resources: there are any number of reasons to stop the use of fossil fuels.

Recommended for you

Separation of para and ortho water

19 hours ago

(Phys.org) —Not all water is equal—at least not at the molecular level. There are two versions of the water molecule, para and ortho water, in which the spin states of the hydrogen nuclei are different. ...

User comments : 7

Adjust slider to filter visible comments by rank

Display comments: newest first

sender
not rated yet May 19, 2009
e.coli strains and specialized high pressure withstanding 4N synthetic bacteria offer greater yield per cubic inch of space in contrast to most plants
nkalanaga
5 / 5 (1) May 19, 2009
Possibly, but biomass is available as waste, which currently is either burned (pollution) or buried (filling landfills). This way you get rid of the waste and produce a useful product. Eventually we may have to go to bacteria, if the demand is great enough, but for now, this will do.
Soylent
not rated yet May 19, 2009
e.coli strains and specialized high pressure withstanding 4N synthetic bacteria offer greater yield per cubic inch of space in contrast to most plants


E.coli does not photosynthesize. It is not a way you can make energy, it is a use of energy.
Yogaman
5 / 5 (1) May 20, 2009
Soylent:

E. coli may not come factory-equipped with photosynthesis, but see, for example,
http://www.lyon.e...isH1.pdf
or
http://parts.mit..../Project

Also, note that photosynthesis doesn't "make" energy either, but it converts otherwise locally incident and transitory energy from sunlight to a portable, long-lasting, chemical form.

I also agree with nkalanaga that as much residual value as possible needs to be recovered from biomass waste, but I bet photosynthetic bacteria will be needed, too, to supplement the available supply of cheaply convertible waste.
Woobie
not rated yet May 20, 2009
I haven't heard anyone comment on the applicability of hemp as a cellulose crop. It has the advantage over switchgrass, I believe, of also producing food-grade oil and protein via its seeds. From what I understand it can produce three to four time the yield of paper-quality pulp per year as compared to tree farms, and since I've grabbed the tar baby, it could at the same time be harvested for medicinal products. Each product comes from a different part of the plant, so that's three or four products from one harvest.
nkalanaga
not rated yet May 20, 2009
That's part of the reason it's illegal. Back in the 20s or 30s, William Hearst was afraid that it would make his newsprint empire's tree farms unprofitable, so he tried to get it outlawed. Congress wasn't in the mood to protect his profits, so he framed it as a moral issue. Congress was eager to ban a "dangerous drug", so he got his protection. The laws against marijuana originally were to protect a newspaper baron's profits!

For that matter, using cellulose, one could recycle old newspapers!
jerryd
not rated yet Jun 27, 2009
You have a choice of either medicine or biomass as they need different growing styles.
For biomass they need to be close together so stalk grow straight and 20' tall vs medicine where you need wider spacing for buds.
I see one day when many yards have a hemp planting for it's own energy needs along with a wind gen and a solar thermal engine that can be run on hemp when the sun doesn't shine.
This would cost under $10k in mass production and be enough for home heat, colling other energy needs and charge an electric car with enough left over to sell. All of this is doable with 30 yr old tech.
We can always use the F-T process which because biomass is so clean need less energy than it does with coal and use the waste heat to make electricity to do the same thing.