New one-of-a-kind technology will fly on two NASA missions

Dec 19, 2008
Compression chips mounted on board at Univ. of Idaho ready for radiation testing. Credit: Univ. of Idaho

(PhysOrg.com) -- Engineers at the University of Idaho have developed unique new technology that will be used in upcoming NASA missions that will study the Earth and Sun-Earth connection.

Under the general guidance of a grant technical officer Pen-Shu Yeh, a senior engineer at NASA's Goddard Space Flight Center, Greenbelt, Md., the engineering team at the University of Idaho's (U-Idaho) Center for Advanced Microelectronics Biomolecular Research (CAMBR) located in Post Falls, Idaho, recently developed three advanced special purpose processors. These processors will be used in the Landsat Data Continuity Mission (LDCM) and the Magnetospheric Multiscale Mission (MMS) mission.

Development of the Algorithms

Yeh lead the creation of an advanced data compression algorithm that will increase science data return for NASA missions. "She demonstrated that the algorithm is superior to existing technology for onboard applications." said Gary Maki, Principal Investigator on the U-Idaho team. A second algorithm, a channel coder, was created by Prof. Shu Lin of University of California at Davis, for protecting data fidelity in a communication channel.

The data compression algorithm, adopted by the international Consultative Committee on Space Data Systems (CCSDS) in 2005, allows missions to precisely control compression factor, therefore the data rate from instruments. "The algorithm is more than 50 times more complicated than the previous CCSDS compression standard," says Yeh. "However, this algorithm is much more versatile, but it does pose a great challenge for implementation."

The channel coder algorithm, devised by one of the world's leading coding expert, Shu Lin, was created for high-speed space use under a set of requirements provided by another Goddard engineer, Wai Fong who also provided guidance in the technology development. The algorithm is now being considered by the CCSDS as a new standard. The channel coder provides protection to data in the form of 'error-correction-codes' and thus improves communication channel quality. This new algorithm is shown to perform better than previous CCSDS standards.

The team of specialized processor chip designers at U-Idaho were able to implement these difficult algorithms and create high speed versions suitable for various space missions. They tested the processor chips in October. Aeroflex, a company in Colorado Springs is now testing for flight qualification.

"We at NASA are extremely fortunate to have the U-Idaho team developing these chips from given algorithms," says Yeh. "The team's capability allows high-end specialized space processors to be developed at a budget level considered 'shoe-string' by industry standards. I hope other NASA centers and maybe other government agencies can benefit from this capability and the developed technology."

Generally speaking, two of the chips - the Discrete Wavelet Transformer and Bit Plane Encoder – compress data to be sent back to Earth. "If we didn't produce these chips, instruments on the MMS satellites would have to greatly reduce science data return or use an inferior technique with less performance," Yeh said. The third chip – the Low Density Parity Check encoder, adds redundancy information to data before it is transmitted to Earth. This allows for error corrections caused by signal degradation. A fourth chip, the previously developed lossless data compression chip called Universal Source Encoder for Space and the newly developed LDPC channel coder will be implemented in the LDCM mission.

LDCM is the future of Landsat satellites. It will continue to obtain valuable data and imagery to be used in agriculture, education, business, science, and government. The Landsat Program provides repetitive acquisition of medium resolution near-infrared and visible data of the Earth's surface on a global basis.

The MMS will have four spacecraft acting in concert to measure the three-dimensional structure and motion of magnetic and electric fields around the Earth. MMS will determine the small-scale basic plasma processes which transport, accelerate and energize plasmas in thin boundary and current layers – and which control the structure and dynamics of the Earth's magnetosphere. MMS will for the first time measure the 3-D structure and dynamics of the key magnetospheric boundary regions, from the subsolar magnetopause to the distant tail. Launch is planned for 2014.

"Currently, this new technology is not available anywhere else in the world," Maki said.

Provided by NASA's Goddard Space Flight Center

Explore further: Spacewalking astronauts finish extensive, trick cable job

add to favorites email to friend print save as pdf

Related Stories

A 'Flickr-ing' view of the world, in 4-D

Feb 13, 2015

Imagine a version of Google Street View where you could hit the rewind button and see any point in time over the last five years. Cornell researchers are building something like that, at least for a few much-visited ...

Wanted: The faces of the chemical crowd

Feb 11, 2015

Elements and their compounds will no longer be able to hide in mixtures, even if the latter are made up of many components. The end of chemical incognito is a result of the development at Warsaw's Polish ...

Recommended for you

Spacewalking astronauts finish extensive, trick cable job

3 hours ago

(AP)—Spacewalking astronauts successfully completed a three-day cable job outside the International Space Station on Sunday, routing several-hundred feet of power and data lines for new crew capsules commissioned ...

Study of atmospheric 'froth' may help GPS communications

Feb 27, 2015

When you don't know how to get to an unfamiliar place, you probably rely on a smart phone or other device with a Global Positioning System (GPS) module for guidance. You may not realize that, especially at ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.