Virtual laboratory predicts train vibrations

February 9, 2011
Researchers test in the computer what happens in the railway line. Credit: SINC

The construction of new rail lines, or the relocation of old ones underground, has increased society's interest over recent years in the vibrations produced by trains, especially among people who live or work near the tracks. Now a study headed by the Polytechnic University of Valencia (UPV) has made it possible to estimate the trajectory of vibrations from the point at which they are generated (wheel-rail contact) through to the ground.

"The model acts as a "virtual train laboratory', meaning that, if the parameters of the train or the track ballast are changed, it is possible to infer the pattern of the resulting vibrations", Julia Real, professor of transport and railways at the UPV and lead author of the study, tells SINC. "This is ideal for testing changes that, if they work, could be put into practice".

If, for example, the data from an AVE with an aerodynamic nose are entered rather than those from another train with different mechanical characteristics, different patterns are obtained. The same thing happens when comparing a track without any levelling defects with another older one, or if the condition or type of material used beneath the sleepers are changed.

"The results depend to a large extent on the elasticity, density and thickness of the materials, especially the ballast (gravel that the sleepers rest on)", points out Pablo Salvador, another UPV researcher, who is also a co-author of the study.

The scientists created the analytical model using that describe the frequency and number of waves. The details are published in the Journal Mathematical and Computer Modelling.

"It's a fairly robust model that is relatively simple to use, and which makes it possible to determine potential vibration levels in an area following the introduction of a rail line, and also provides input information for a 2D surface vibration propagation system", explains Salvador.

Validation on the Madrid-Barcelona line

The theoretical results have been successfully compared with experimental frequency and vibration duration measurements taken along the Madrid-Barcelona high speed line. This information was provided by the public company Ineco, which is attached to the Ministry of Public Works.

This study is the first of a series of three, which will use the same methodology to analyse two other rail facilities – an urban tram line (line 1 of the FGV in Alicante) and a Spanish narrow gauge railway along the Santander-Liérganes line.

"In the first case, which has just been published, we focused on 'the best' (new vehicles and tracks meeting maximum speed and international gauge requirements); in the second case, the urban tram calls for the greatest possible attention with regard to vibrations, requiring extreme care even though they have only small loads and speeds; and the third case will look at a mixed rail operation (passengers and merchandise) making optimum use of resources", explains Julia Real.

"These are three different kinds of rail facility, each having its own structure, requirements and determining factors… but all of which are tremendously efficient with regard to society and the environment", the researcher concludes.

Explore further: New Technology Could Transform Every Train into A High Speed Cracked Rail Detector

More information: Pablo Salvador, Julia Real, Clara Zamorano y Antonio Villanueva. "A procedure for the evaluation of vibrations induced by the passing of a train and its application to real railway traffic". Mathematical and Computer Modelling 53 ( 1-2): 42-54, January 2011.

Related Stories

China passenger train hits 300 mph, breaks record

December 3, 2010

(AP) -- A Chinese passenger train hit a record speed of 302 miles per hour (486 kilometers per hour) Friday during a test run of a yet-to-be opened link between Beijing and Shanghai, state media said.

Recommended for you

Google, EU dig in for long war

July 20, 2017

Google and the EU are gearing up for a battle that could last years, with the Silicon Valley behemoth facing a relentless challenge to its ambition to expand beyond search results.

Strengthening 3-D printed parts for real-world use

July 20, 2017

From aerospace and defense to digital dentistry and medical devices, 3-D printed parts are used in a variety of industries. Currently, 3-D printed parts are very fragile and only used in the prototyping phase of materials ...

Swimming robot probes Fukushima reactor to find melted fuel

July 19, 2017

An underwater robot entered a badly damaged reactor at Japan's crippled Fukushima nuclear plant Wednesday, capturing images of the harsh impact of its meltdown, including key structures that were torn and knocked out of place.


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.