Researchers demonstrate for the first time how light squeezes through small holes

May 8, 2008

How does light pass through a tiny hole" For the first time, Dr Aurele Adam and Prof. Paul Planken of Delft University of Technology, in conjunction with two South Korean and one German research groups, have succeeded in mapping this process properly.

Their research also promises a significant improvement in Terahertz microscopy in the long term, a potentially interesting new imaging technique, and Terahertz microspectroscopy, a technique for identifying tiny quantities of substances using light. Their findings will be published in the scientific journal Optics Express this week.

We know from physics that it is particularly difficult to pass light through a hole smaller than half the wavelength of the light used. With the help of fellow scientists, researchers at Delft University of Technology have managed to provide insight into this process by conducting measurements using what is known as Terahertz radiation (THz radiation). This is far-infrared light with an approximate frequency of 1012 Hz.

This type of radiation allows the researchers to measure the force of the penetrating light’s electrical field near the hole and not, as is usual, the intensity of the penetrating light. The electrical field’s values reveal much more about how light behaves in such situations than intensity can. Measurement of the strength of the electrical field is done with great precision by measuring the refractive-index of a crystal near the hole using a laser beam.

The crystal’s refractive index varies (very slightly) when in a variable electrical field. By measuring the variations in the refractive index, conclusions can be drawn on the strength of the light’s electrical field near the hole.

‘This process has never been mapped properly, mainly because the technology was not available to do so,’ says Planken. The experiments largely confirm, for the first time, what is known as the Bouwkamp model, named after a Dutch researcher who worked at Philips and who in 1950 created a theoretical model for the way in which light passes through small holes. For instance, the strength of the electrical field, as predicted by Bouwkamp, is greatest at the edge of the holes and the field’s strength indeed decreases in with decreasing frequency of the THz light used.

In their experiments, the researchers also discovered that even if the hole is up to fifty times smaller than the wavelength used, sufficient light can pass through to allow measurements near the hole; an extremely difficult task using other methods. This technique has also enabled the researchers to record the entire process, allowing them to observe, slowed down a thousand billion (1012) times, how the light exits the hole and subsequently how the light waves move outwards in the same way as ring-shaped ripples caused by a stone thrown into a pond.

The findings of Planken and his colleagues are not just significant from the point of view of fundamental science. They can help develop the use of Terahertz microscopy (THz). In the long term, Planken wishes to use the tiny holes as an improved source of THz light. The smaller these source holes become, the sharper the images that can be created using this technique and the easier it will be to measure small quantities of substances.

Terahertz radiation (with a frequency of about 1012 Hz) is a type of electromagnetic radiation which is increasingly used to create images. After all, many materials, such as paper, plastics and clothing, are transparent to THz radiation, while they block visible light.

Terahertz microscopes do not yet provide such sharp images. The development of stronger and smaller sources and more sensitive detectors will improve the viability of creating images of, for example, biological cells using THz radiation.

Source: Delft University of Technology

Explore further: Microcavity-engineered plasmonic resonances for strong light-matter interaction

Related Stories

Single-pixel 'multiplex' captures elusive terahertz images

June 29, 2014

A novel metamaterial enables a fast, efficient and high-fidelity terahertz radiation imaging system capable of manipulating the stubborn electromagnetic waves, advancing a technology with potential applications in medical ...

Checking people at airports -- with terahertz radiation

September 18, 2008

Within the last few years the number of transport checks – above all at airports – has been increased considerably. A worthwhile effort as, after all, it concerns the protection of passengers. Possibilities for new and ...

Recommended for you

Bringing a hidden superconducting state to light

February 16, 2018

A team of scientists has detected a hidden state of electronic order in a layered material containing lanthanum, barium, copper, and oxygen (LBCO). When cooled to a certain temperature and with certain concentrations of barium, ...


Adjust slider to filter visible comments by rank

Display comments: newest first

3 / 5 (2) May 08, 2008
Wow! After reading the title & the introductory paragraph's I was mightily impressed by this new report.
Yet, terahertz is the correct spelling for 10 to the 12th power hetz, not Terahertz.
If one wants to capitalize the t in the contraction(THz), who cares.
If one understands physics, however, one must also understand mathematics. Doing so suggests one does not substitute one symbol for another%u2014in this case, a printed representation of the sound.
Interestingly, the article does not actually explain how the light is squeezed through such small holes, other than stating that they can. Indeed, they state that %u201Ceven if the hole is up to fifty times smaller than the wavelength used%u201D which would seem to beg for an explanation.
%u201CMany materials are transparent to terahertz radiation?%u201D I copied this from the text. I am curious what the many materials are which are not transparent to terathertz radiation? Why don%u2019t we build a gigantic shield out of them to protect the Earth?
I apologize for being an ass.

4.5 / 5 (2) May 08, 2008
Good post Mike. Man I sure wish physorg would fix the quote bug in these comments. It keeps biting me, too.

I also wish journalists that write physics articles would learn some grade school science. Twice he describes t-waves as 1012Hz. Sheesh.

3 / 5 (2) May 08, 2008
The "to the power of" symbol doesn't always copy out correctly. Most of these physorg articles are copy and pasted from other sources (with permission), and if they aren't using the same character set, sometimes things get screwed up. That "1012Hz" thing is a common result of this. It is also a common result of not having editors who are worth a darn:). Oops! Did I say that out loud?
1 / 5 (3) May 08, 2008
They are worth less than you thought. They let visious idiots with aliases like "big dumb wierdo" pack the ratings with obvious lies until I was thrown off the web forum. They are a worthless bunch of phonies that wont admit a mistake no matter how many times I have told them about this deception.
4 / 5 (2) May 08, 2008
Difficult or not, it is extremely disappointing that a science website does not catch and fix errors involving exponents. Even physics undergraduates can do this!
1 / 5 (1) May 09, 2008
It strikes me as a very difficult way to do this kind of study. Making use of gigahertz frequency instead means that the hold size will be on the order of centimeters and much more managable. Exotic techniques would not then be needed to be used to detect the electric field.
How is the varying electric field / refractive index measured. At the terrahertz frequencies it is hard to proecess this. I could expect that light shining through the crystal will have its phase & frequency modulated, or if in a prism will deflect the beam into a vibrating fan, is that the case here?
1 / 5 (1) Jun 05, 2008
This is a very poorly written article. Anyone ever hear of diffraction? How about the wave equation?

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.