New design for transistors powered by single electrons
![Colorized micrograph of three tunable gates across an electrical channel in a single electron tunneling (SET) transistor. Colorized micrograph of three tunable gates across an electrical channel in a single electron tunneling (SET) transistor](https://scx1.b-cdn.net/csz/news/800a/2006/nist20306.jpg)
Scientists have demonstrated the first reproducible, controllable silicon transistors that are turned on and off by the motion of individual electrons. The experimental devices, designed and fabricated at NTT Corp. of Japan and tested at NIST, may have applications in low-power nanoelectronics, particularly as next-generation integrated circuits for logic operations (as opposed to simpler memory tasks).
The transistors, described in the Jan. 30, 2006, issue of Applied Physics Letters,* are based on the principle that as device sizes shrink to the nanometer range, the amount of energy required to move a single electron increases significantly. This makes it possible to control individual electron motion and current flow by manipulating the voltage applied to barriers, or "gates," in the electrical circuit. At negative voltage, the transistor is off; at higher voltage, the transistor is turned on and individual electrons file through the circuit, as opposed to thousands at a time in a conventional device.
![The colorized images show how tuning the voltage of the three gates controls very small amounts of electrical charge and regulates current flow in the new silicon transistor. In the first figure, the pattern of diagonal lines indicates the charge is correlated throughout the device, and current is flowing (at levels ranging from 0 Amps shown in red, to 1.4 nanoAmps shown in violet). The next three figures show what happens as the voltage applied to the center gate is reduced. In the last figure, the square pattern indicates the charge has separated in the device, and the large amount of white space indicates a related drop off in the current. Credit: NTT/NIST New design for transistors powered by single electrons](https://scx1.b-cdn.net/csz/news/800a/2006/4blocks.jpg)
This type of innovative transistor, called a "single-electron tunneling" (SET) device, is typically made with a metal "wire" interrupted by insulating barriers that offer a rigid, narrow range of control over electron flow. Silicon devices, by contrast, have barriers that are electrically "tunable" over a wider operating range, offering finer, more flexible control of the transistor's on/off switch. Particular voltage levels are applied across the barriers, to manipulate charge, as a means of encouraging or impeding electron flow. Silicon-based devices also allow fabrication using standard semiconductor technology. Until now, however, no silicon SET transistor designs have been reported that are reproducible and controllable.
The NIST/NTT team made five uniform, working silicon transistors with tunable barriers. Each device consists of a silicon channel 360 nanometers (nm) long and 30 nm wide, with three gates crossing the channel. The gates have two levels; the upper level turns the current on and off, while the lower level controls electron flow in small local areas. The team was able to tune gate conductance properties over a wide range, by more than three orders of magnitude.
*A. Fujiwara, H. Inokawa, K. Yamazaki, H. Namatsu, Y. Takahashi, N.M. Zimmerman, and S.B. Martin. 2006. Single electron tunneling transistor with tunable barriers using silicon nanowire MOSFET. Applied Physics Letters. Jan. 30.
Source: NIST