This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:

fact-checked

trusted source

proofread

Multifunctional interface enables manipulation of light waves in free space

Multifunctional interface enables manipulation of light waves in free space
Hybrid PIC/metaoptical system. (a) Schematic of the system: An optical fiber feeds the laser light simultaneously to all the apodized gratings in a PIC via waveguides. The light comes out of the gratings, and a separate chip containing an array of metaoptics shapes the grating-output in parallel. (b) Close-up image of the entire hybrid platform with the array of 14 metaoptics, placed on top of the PIC (covered by the metaoptics chip). The optical fiber array shown on the right is used to feed laser light to the PIC. (c) Schematic diagram of the optical setup. SMF, single-mode fiber; MS, metasurface chip; F, focal plane; L1, objective lens (Mitutoyo 10× plan Apo ∞); BS, beam-splitter cube (Thorlabs CCM1 BS014); L2, plano–convex lens; L3, plano–convex lens; CAM, camera (Point Grey CMLN 13S2M CS). A warm LED is used for alignment and turned off for measurements. In our experiment, the vertical distance between the planes of MS and PIC is kept constant at 1 mm. The microscope is moved vertically to collect light from different planes. Credit: Advanced Photonics Nexus (2023). DOI: 10.1117/1.APN.2.3.036012

Recent technological advances have given us a remarkable ability to manipulate and control light waves, opening up numerous applications in various fields, such as optical communication, sensing, imaging, energy, and quantum computing. At the heart of this progress are photonic structures that can control light waves, either at the chip level in the form of photonic integrated circuits (PICs) or in free space as meta-optics.

Combining these structures allows for the creation of compact optical systems. The PICs can be used to make subtle changes to the light wave, such as the manipulation of its phase and intensity to achieve a desired output, which can then be guided in by meta-optics. Such combined systems can control qubits for and power light detection, as well as ranging systems like the ones used for autonomous vehicle navigation and mapping.

Since PICs use nanometer-scale waveguides to confine and direct light, coupling their light to and from larger devices, such as optical fibers, is tricky. Grating couplers are commonly used for this purpose because of their grating structure that can diffract light going in or out of the PIC's waveguides. However, these devices can only shape the light wave to a certain degree, limiting their applicability.

In view of this shortcoming, meta-optics capable of manipulating optical wavefronts with arbitrary shapes have been suggested to couple light from PICs. Although this approach is promising, no multifunctional coupling between PIC and free space has yet been reported.

Now, in a study published in Advanced Photonics Nexus, researchers from the University of Washington have demonstrated a chip-scale hybrid PIC/meta-optical platform consisting of a photonic integrated circuit with gratings below a separate meta-optics chip. The PIC comprises 16 identical gratings arranged in a two-dimensional array, each with an aperture size of 300 micrometers and coupled to an with a grating coupler. These gratings serve as waveguides and direct light from the fiber to the meta-optics chip which shapes and outputs light to free space, parallel to the input light.

"Using an array of low-loss meta-optics, we have developed a flexible and interchangeable interface between a photonic integrated circuit and free space," says senior author Associate Professor Arka Majumdar from the University of Washington in Seattle.

Using this platform, the researchers were able to simultaneously pass light through 14 PIC gratings and then shape the corresponding beam with 14 different meta-optics, such as meta-lenses, vortex beam generators, extended depth of focus lenses, and holograms.

"Meta-optics has the ability to shape optical wavefronts to create a multifunctional interface between free-space optics and integrated photonics. This study exploits that. All the light beams that come out of the PIC are identical, but by placing different meta-optics on top of each , we were able to simultaneously manipulate the beams individually," explains Majumdar.

In their experiments with different meta-optics, the researchers found that the device operated with high accuracy and reliability, even without prior knowledge of the input light or the need for precise alignment between the two chips. Specifically, they achieved a diffraction limited spot of three micrometers and a holographic image with a peak signal-to-noise ratio greater than 10 decibels.

The remarkable feature of the proposed device is its ability to change its functionality simply by replacing the meta-optics linked to the PIC. This allows for a wide range of possibilities for controlling and modifying light beams with a high degree of error tolerance. The potential applications of this interface are manifold, and include beam steering, structured light generation, optical trapping, and manipulation of cold atom qubits.

More information: Quentin A. A. Tanguy et al, Multifunctional interface between integrated photonics and free space, Advanced Photonics Nexus (2023). DOI: 10.1117/1.APN.2.3.036012

Provided by SPIE

Citation: Multifunctional interface enables manipulation of light waves in free space (2023, May 23) retrieved 16 July 2024 from https://phys.org/news/2023-05-multifunctional-interface-enables-free-space.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Leaky-wave metasurfaces: A perfect interface between free-space and integrated optical systems

209 shares

Feedback to editors