This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:

fact-checked

peer-reviewed publication

trusted source

proofread

Researchers develop strain sensors for health, machine use

Researchers Demonstrate New Strain Sensors By Creating Novel Health Monitoring, Machine Interface Devices
The new sensor consists of a silver nanowire network embedded in an elastic polymer. The polymer features a pattern of parallel cuts of a uniform depth, alternating from either side of the material: one cut from the left, followed by one from the right, followed by one from the left, and so on. This feature – the patterned cuts – is what enables a greater range of deformation without sacrificing sensitivity. Credit: Shuang Wu, NC State University

Researchers at North Carolina State University have developed a stretchable strain sensor that has an unprecedented combination of sensitivity and range, allowing it to detect even minor changes in strain with greater range of motion than previous technologies. The researchers demonstrated the sensor's utility by creating new health monitoring and human-machine interface devices.

Their research paper, "Highly Sensitive, Stretchable, and Robust Strain Sensor Based on Crack Propagation and Opening," is published in the journal ACS Applied Materials & Interfaces.

Strain is a measurement of how much a material deforms from its original length. For example, if you stretched a rubber band to twice its original length, its strain would be 100%.

"And measuring strain is useful in many applications, such as devices that measure blood pressure and technologies that track physical movement," says Yong Zhu, corresponding author of a paper on the work and the Andrew A. Adams Distinguished Professor of Mechanical and Aerospace Engineering at NC State.

Researchers Demonstrate New Strain Sensors By Creating Novel Health Monitoring, Machine Interface Devices
To demonstrate how far the sensors can be deformed, the researchers created a wearable device for monitoring motion in a person's back, which has utility for physical therapy. Credit: Shuang Wu, NC State University

"But to date there's been a trade-off. Strain sensors that are sensitive—capable of detecting small deformations—cannot be stretched very far. On the other hand, sensors that can be stretched to greater lengths are typically not very sensitive. The new sensor we've developed is both sensitive and capable of withstanding significant deformation," says Zhu. "An additional feature is that the sensor is highly robust even when over-strained, meaning it is unlikely to break when the applied strain accidently exceeds the sensing range."

The new sensor consists of a embedded in an . The polymer features a pattern of parallel cuts of a uniform depth, alternating from either side of the material: one cut from the left, followed by one from the right, followed by one from the left, and so on.

"This feature—the patterned cuts—is what enables a greater range of deformation without sacrificing sensitivity," says Shuang Wu, who is first author of the paper and a recent Ph.D. graduate at NC State.

Researchers Demonstrate New Strain Sensors By Creating Novel Health Monitoring, Machine Interface Devices
To demonstrate the sensor's utility in human-machine interface devices, the researchers created a three-dimensional touch controller that can be used to control a video game. Credit: Shuang Wu, NC State University

The sensor measures strain by measuring changes in electrical resistance. As the material stretches, resistance increases. The cuts in the surface of the sensor are perpendicular to the direction that it is stretched. This does two things. First, the cuts allow the sensor to deform significantly. Because the cuts in the surface pull open, creating a zigzag pattern, the material can withstand substantial deformation without reaching the breaking point. Second, when the cuts pull open, this forces the electrical signal to travel further, traveling up and down the zigzag.

"To demonstrate the sensitivity of the new sensors, we used them to create new wearable blood pressure devices," Zhu says. "And to demonstrate how far the can be deformed, we created a wearable device for monitoring motion in a person's back, which has utility for physical therapy."

"We have also demonstrated a human-machine interface," Wu says. "Specifically, we used the sensor to create a three-dimensional touch controller that can be used to control a video game."

"The sensor can be easily incorporated into existing wearable materials such as fabrics and athletic tapes, convenient for practical applications," Zhu says. "And all of this is just scratching the surface. We think there will be a range of additional applications as we continue working with this technology."

The paper was co-authored by Katherine Moody, a Ph.D. student at NC State; and by Abhiroop Kollipara, a former undergraduate at NC State.

More information: Shuang Wu et al, Highly Sensitive, Stretchable, and Robust Strain Sensor Based on Crack Propagation and Opening, ACS Applied Materials & Interfaces (2022). DOI: 10.1021/acsami.2c16741

Citation: Researchers develop strain sensors for health, machine use (2023, January 3) retrieved 24 April 2024 from https://phys.org/news/2023-01-strain-sensors-health-machine.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

How to bounce back from stretched out stretchable sensors

30 shares

Feedback to editors