Cylindrical vector beam multiplexer/demultiplexer using off-axis polarization control

Cylindrical vector beam multiplexer/demultiplexer using off-axis polarization control
a1, Polarization and intensity distributions in each diffraction order with Gaussian beam incident, respectively. a2, Polarization and intensity distributions in each diffraction order with cylindrical vector beam (CVB) (m=-1) incident. b1, Measured coaxial CVB with 4 modes. b2-b5, Measured Gaussian points after demultiplexing of the different CVB mode channels. Credit: Shuqing Chen, Zhiqiang Xie, Huapeng Ye, Xinrou Wang, Zhenghao Guo, Yanliang He, Ying Li, Xiaocong Yuan, and Dianyuan Fan

Cylindrical vector beam (CVB) multiplexing has emerged as a powerful technique to boost signal channels. Coupling and separating CVBs are two pivotal elements in CVB multiplexing communication. Although off-axis control technologies such as miniature Dammann vortex gratings have been investigated to couple and separate light beams, it is usually limited to light beams with homogeneous polarization due to its phase-only grating structure. For CVBs with inhomogeneous polarization, a gradient phase device is required to create a gradient phase difference between the left- and right-handed circularly polarized (LHCP/RHCP) components, so that the CVBs with off-axis incident angles can coaxially propagate and carry different phase structures. Despite considerable efforts of off-axis control technologies, the off-axis polarization control of CVBs still remains a challenge.

According to Jones matrix analysis, CVBs can be obtained by linearly superposing two orthogonal circularly polarized vortex beams with conjugate topological charges. After they are decomposed into LHCP and RHCP components, CVBs can be off-axis controlled by independently modulating the phase of these two components, and thus the mode coupling and separating can be achieved via introducing gradient phase changes. The optical metasurface is a kind of micro-nano optical device, which is capable of phase, amplitude, and control by arranging the artificial nanoantenna. It shows that the metasurface enables circular polarization-dependent phase modulation via the , which provides a route for independently phase control of two circularly polarized components.

Light Science & Application reports a new work from a team of scientists, led by Professors Dianyuan Fan, Xiaocong Yuan and Ying Li from Shenzhen University, China and co-workers. They have proposed an approach to realize off-axis polarization control for CVB multiplexing/demultiplexing based on a metal-dielectric-metal metasurface. The LHCP and RHCP components of CVBs were independently modulated via spin-to-orbit interactions by the properly designed metasurface, and then simultaneously multiplexed and demultiplexed due to the reversibility of light path and the conservation of vector mode. More interestingly, the proposed multiplexers/demultiplexers are compatible with wavelength-division-multiplexing and polarization-division-multiplexing due to the broadband response and orthogonal polarization modulation. This study paves the way for CVB multiplexing/demultiplexing and may benefit high-capacity CVB communication.


  • Traditional phase-type grating devices are only suitable for off-axis control of uniform polarized beam. By combining the geometric phase and propagation phase in metasurface, they independently design the off-axis modulation for RHCP and LHCP components, which empowers the off-axis control of CVBs with nonuniform polarization distributions.
  • The vector mode is independent from wavelength and polarization state, which is expected to achieve hybrid-dimensional multiplexing communication. Since the proposed CVB multiplexer/demultiplexer based on off-axis polarization control shows a broadband response characteristic and orthogonal polarization response, it is compatible with wavelength-division-multiplexing and polarization-division-multiplexing.

More information: Shuqing Chen et al, Cylindrical vector beam multiplexer/demultiplexer using off-axis polarization control, Light: Science & Applications (2021). DOI: 10.1038/s41377-021-00667-7

Journal information: Light: Science & Applications

Citation: Cylindrical vector beam multiplexer/demultiplexer using off-axis polarization control (2021, December 27) retrieved 24 April 2024 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Method of angular momentum multiplexing and demultiplexing for high-capacity optical communications


Feedback to editors