Scientists find a way to stabilize a promising material for solar panels

Scientists find a way to stabilize a promising material for solar panels
Credit: KTH Royal Institute of Technology

One of the solar energy market's most promising solar cell materials—perovskite—is also the most frustrating. A research team in Sweden reports a possible solution to the environmental instability of perovskite—an alternative to silicon that's cheap and highly efficient, yet degrades dramatically when exposed to moisture.

The team from KTH Royal Institute of Technology in Stockholm developed a new synthetic alloy that increases perovskite ' durability while preserving energy conversion performance. The researchers published their findings in Communications Materials.

"Perovskite usually dissolves immediately on contact with water," says co-author James Gardner, a researcher at KTH. "We have proven that our alloyed perovskite can survive for several minutes completely immersed in water, which is over a 100 times more stable than the perovskite alone. What's more, the that we have built from the material retain their efficiency for more than 100 days after they are manufactured. "

Perovskites are a class of materials with a specific crystal structure, named after the mineral with that structure. In solar cells they have shown potential for —with energy conversion efficiencies as high as 25 percent—and, best of all, low production costs.

However, these thin-film cells are highly susceptible to outdoor elements, which accelerates their degradation—and limits their viability in a solar market where virtually all panels are based on silicon.

KTH researcher James Gardner says that his team's work represents a step towards developing an alternative, more stable perskovite product. They encapsulated a light-absorbing perskovite layer with a 2D perskovite film layer that provides a water repellent quality thanks to the addition of long-chain alkylammonium ions.

The researchers report that the cells' power conversion efficiency dropped by 20 percent after six months at a of 25 to 80 percent; and they could be completely immersed in water for a few minutes before degradation started.

Gardner says that the 2D perovskite coating also mitigates energy losses in the light-absorbing 3D perovskite, which leads to an enhancement in the photovoltage. The findings indicate that long-chain alkylammonium cation-based 2D perovskites can improve the environmental stability of 3D-based perovskites, without significant loss of performance and may lead to commercially successful solar cells.

Explore further

Perovskite solar cells with atomically coherent interlayers on SnO₂ electrodes

More information: Bhushan P. Kore et al, Moisture tolerant solar cells by encapsulating 3D perovskite with long-chain alkylammonium cation-based 2D perovskite, Communications Materials (2021). DOI: 10.1038/s43246-021-00200-8
Citation: Scientists find a way to stabilize a promising material for solar panels (2021, October 27) retrieved 1 October 2022 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Feedback to editors