New method to produce composites with 'shape memory'

Scientists explore method to produce composites with ‘shape memory’
Shape memory testing of cured resin and pultruded composite specimens: (a) Deformed specimen of cured resin in the test fixture after heating; (b) cured resin specimens after shape fixing; (c) cured resin specimens after shape recovery; (d) deformed specimen of pultruded composite in the test fixture after heating; (e) geometry of pultruded composite specimen after shape fixing as compared to geometry of the test fixture; and (f) pultruded composite specimen after shape recovery. Credit: Roman Korotkov et al./Composites Part A: Applied Science and Manufacturing

Skoltech researchers have investigated a promising type of composite material in terms of their shape memory behavior—how they resume their original shape following deformation if exposed to the right temperature or other conditions. The materials studied were glass fiber-reinforced epoxy-based flat laminates, produced with a technique called pultrusion. While it has considerable potential for manufacturing composites with shape memory for electronics, biomedicine, and more, the method's application to such materials is examined for the first time in the Skoltech-led study reported in Composites Part A: Applied Science and Manufacturing.

Shape memory polymers, or SMPs, are materials that can recover their initial shape under external stimuli such as temperature, light, moisture, acidity, electricity, or electromagnetic field. They are widely used in the aerospace, biomedical, and automotive industries, as well as in 4D printing, temperature sensors, and electronic devices.

SMPs are often reinforced with carbon, basalt, or glass fibers, resulting in with superior properties. A number of techniques are used for SMP composite manufacturing, most of them fairly well-studied. Surprisingly, until now there have been no studies on the shape memory effect in composites produced by pultrusion—the most efficient composite manufacturing process available. It is a fast, versatile, and low-waste technology that could potentially yield new types of shape memory structural components with unique combinations of geometries and , impossible to produce with other methods.

"In this study, we investigated the behavior and mechanical characteristics of epoxy-based pultruded flat laminates reinforced with unidirectional glass fibers. The analysis also encompassed the resin cure kinetics and the thermomechanical and thermophysical properties of the cured resin," commented the project's PI, Alexander Safonov of the Skoltech Center for Design, Manufacturing and Materials.

"Our findings may be used for further numerical simulations and the optimization of the pultrusion process. Besides, the results demonstrate that pultruded SMPCs show significant promise for structural applications," the researcher added.

More information: Roman Korotkov et al, Shape memory behavior of unidirectional pultruded laminate, Composites Part A: Applied Science and Manufacturing (2021). DOI: 10.1016/j.compositesa.2021.106609

Citation: New method to produce composites with 'shape memory' (2021, September 14) retrieved 22 February 2024 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Scientists optimize productivity of pultrusion manufacturing process


Feedback to editors