Lab 3-D prints microbes to enhance biomaterials

Lab 3-D-prints microbes to enhance biomaterials
Lawrence Livermore National Laboratory researchers suspended bacteria in photosensitive bio-resins and “trapped” the microbes in 3D structures using LED light from the LLNL-developed Stereolithographic Apparatus for Microbial Bioprinting 3D printer. The projection stereolithography machine can print at high resolution on the order of 18 microns — nearly as thin as the diameter of a human cell. Illustration by Thomas Reason/LLNL.

Lawrence Livermore National Laboratory (LLNL) scientists have developed a new method for 3-D printing living microbes in controlled patterns, expanding the potential for using engineered bacteria to recover rare-earth metals, clean wastewater, detect uranium and more.

Through a novel technique that uses light and bacteria-infused resin to produce 3-D-patterned microbes, the research team successfully printed artificial biofilms resembling the thin layers of microbial communities prevalent in the real world. The research team suspended the bacteria in photosensitive bioresins and "trapped" the microbes in 3-D structures using LED light from the LLNL-developed Stereolithographic Apparatus for Microbial Bioprinting (SLAM) 3-D printer. The projection stereolithography machine can print at high resolution on the order of 18 microns—nearly as thin as the diameter of a human cell.

In the paper, which appears online in the journal Nano Letters, researchers proved the technology can be used effectively to design structurally defined microbial communities. They demonstrated the applicability of such 3-D-printed biofilms for uranium biosensing and rare-earth biomining applications and showed how geometry influences the performance of the printed materials.

"We are trying to push the edge of 3-D microbial culturing technology," said principal investigator and LLNL bioengineer William "Rick" Hynes. "We think it's a very under-investigated space and its importance is not well understood yet. We're working to develop tools and techniques that researchers can use to better investigate how microbes behave in geometrically complex, yet highly controlled conditions. By accessing and enhancing applied approaches with greater control over the 3-D structure of the microbial populations, we will be able to directly influence how they interact with each other and improve system performance within a biomanufacturing production process."

While seemingly simple, Hynes explained that microbial behaviors are actually extremely complex, and are driven by spatiotemporal characteristics of their environment, including the geometric organization of microbial community members. How microbes are organized can affect a range of behaviors, such as how and when they grow, what they eat, how they cooperate, how they defend themselves from competitors and what molecules they produce, Hynes said.

Previous methods for producing biofilms in the laboratory have provided scientists with little control over microbial organization within the film, limiting the ability to fully understand the seen in bacterial communities in the natural world, Hynes explained. The ability to bioprint microbes in 3-D will allow LLNL scientists to better observe how bacteria function in their natural habitat, and investigate technologies such as microbial electrosynthesis, in which "electron-eating" bacteria (electrotrophs) convert surplus electricity during off-peak hours to produce biofuels and biochemicals.

Currently, microbial electrosynthesis is limited because interfacing between electrodes (usually wires or 2-D surfaces) and bacteria is inefficient, Hynes added. By 3-D printing microbes in devices combined with conductive materials, engineers should achieve a highly conductive biomaterial with a greatly expanded and enhanced electrode-microbe interface, resulting in much more efficient electrosynthesis systems.

Biofilms are of increasing interest to industry, where they are used to remediate hydrocarbons, recover critical metals, remove barnacles from ships and as biosensors for a variety of natural and man-made chemicals. Building on synthetic biology capabilities at LLNL, where bacterium Caulobacter crescentus was genetically modified to extract rare-earth metals and detect uranium deposits, LLNL researchers explored the effect of bioprinting geometry on microbial function in the latest paper.

In one set of experiments, researchers compared the recovery of in different bioprinted patterns and showed that cells printed in a 3-D grid can absorb the metal ions much more rapidly than in conventional bulk hydrogels. The team also printed living uranium sensors, observing increased florescence in the engineered bacteria when compared to control prints.

"The development of these effective biomaterials with enhanced microbial functions and mass transport properties has important implications for many bio-applications," said co-author and LLNL microbiologist Yongqin Jiao. "The novel bioprinting platform not only improves system performance and scalability with optimized geometry, but maintains cell viability and enables long-term storage."

LLNL researchers are continuing to work on developing more complex 3-D lattices and creating new bioresins with better printing and biological performance. They are evaluating conductive materials such as carbon nanotubes and hydrogels to transport electrons and feed-bioprinted electrotrophic bacteria to enhance production efficiency in microbial electrosynthesis applications. The team also is determining how to best optimize bioprinted electrode geometry for maximizing mass transport of nutrients and products through the system.

"We are only just beginning to understand how structure governs microbial behavior and this technology is a step in that direction," said LLNL bioengineer and co-author Monica Moya. "Manipulating both the microbes and their physiochemical environment to enable more sophisticated function has a range of applications that include biomanufacturing, remediation, biosensing/detection and even development of engineered living materials—materials that are autonomously patterned and can self-repair or sense/respond to their environment."


Explore further

3-D-printed live cells convert glucose to ethanol, carbon dioxide to enhance catalytic efficiency

More information: Karen Dubbin et al. Projection Microstereolithographic Microbial Bioprinting for Engineered Biofilms, Nano Letters (2021). DOI: 10.1021/acs.nanolett.0c04100
Journal information: Nano Letters

Citation: Lab 3-D prints microbes to enhance biomaterials (2021, February 4) retrieved 26 February 2021 from https://phys.org/news/2021-02-lab-d-microbes-biomaterials.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
140 shares

Feedback to editors

User comments