Engineers test LiDAR system intended for space missions

Engineers test LiDAR system intended for space missions
Credit: CESM

Two images of the same front steps: one taken with a camera and the other with a flash imaging LiDAR, the laser equivalent of radar, under development for future space missions.

This image was acquired by the CECILE prototype LiDAR, developed with the Swiss Center for Electronics and Microtechnology, CESM, Fondazione Bruno Kessler, FBK, in Italy, Visitech in Norway and the German Aerospace Center, DLR.

LiDAR stands for and ranging, with a pulsed laser beam scanning targets by measuring the time it takes for the light to bounce back. The wavelength of light is so much shorter than that of —measured in billionths of a meter rather than centimeters—that LiDAR provides much more precise measurements. On Earth LiDAR is employed widely for autonomous vehicles, helping them to judge distance and identify obstacles.

Flash imaging LiDAR means the 3-D image of the target is generated in one single shot from a 2-D grid of detecting elements, in contrast to the traditional scanning approach based on moving parts. The result is a faster acquisition time, with decreased sensitivity to vibration or target motion—and lower mass and volume making it easier to embark in space.

ESA is interested in LiDAR technology to acquire high-resolution views of landing zones on the Moon or other planets, or to assist with orbital docking maneuvers baselined for the international Mars Sample Return endeavor.

Citation: Engineers test LiDAR system intended for space missions (2021, January 26) retrieved 15 June 2024 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Return of the LIDAR


Feedback to editors