VTT developed an optical fiber made of cellulose

VTT developed an optical fiber made of cellulose
VTT developed an optical fibre made of cellulose. Optical fibre made of cellulose is best suited for sensors that benefit from the biodegradability of the material. Credit: VTT

VTT researchers were able to transmit light in wood-based fibre. Optical fibre made of cellulose is best suited for sensors that benefit from the biodegradability of the material. In the future, optical cellulose fibre may allow detecting changes in the moisture level of buildings.

"The core of the new is made of , modified for the purpose using ionic solvents developed by VTT. Around the core, we made a cladding out of . The R&D is still in its initial phases, so we do not yet know all the applications the new optical could lend itself to," says Senior Scientist Hannes Orelma from VTT.

Light travels in the fibre, because the core is surrounded by cladding material with a lower index of refraction. Light is kept in the core since it is reflected back into the core from the interface of the core and the cladding.

"We have tested the suitability of the fibre for measuring moisture levels. Using a length of fibre of a few centimetres, we have already succeeded to increase the attenuation of transmitted in the fibre many orders of magnitudes," says Research Scientist Ari Hokkanen from VTT.

Cellulose has properties making it suited for use in . The material used in cellulose fibres can in itself react with the substances being measured and absorb them, which is difficult for glass or plastic fibres. Cellulose is also easy to modify as regards, for instance, the index of refraction. Cellulose effectively absorbs and releases water, which can be measured by the change in the attenuation of light transmitted in the fibre. In addition, cellulose is biodegradable, and the fibre used for the sensor can be disposed of with biowaste.

VTT developed an optical fibre made of cellulose. Light travels in the optical fibre made of cellulose, because the core is surrounded by cladding material with a lower index of refraction. Light is reflected back into the core from the interface of the core and the cladding. Credit: VTT

Cellulose-based fibre opens up new opportunities for sensor applications, but it will not compete with glass-based optical fibres in telecommunications applications.

The development of the optical fibre began in VTT's iBex programme, which allows the researchers involved to implement fascinating solutions to global challenges. Currently, the R&D continues in the FinnCERES flagship programme in collaboration with VTT and Aalto University.


Explore further

Fibre research shows promise for ultra-stable applications

More information: H. Orelma et al. Optical cellulose fiber made from regenerated cellulose and cellulose acetate for water sensor applications, Cellulose (2019). DOI: 10.1007/s10570-019-02882-3
Citation: VTT developed an optical fiber made of cellulose (2019, December 3) retrieved 22 February 2020 from https://phys.org/news/2019-12-vtt-optical-fiber-cellulose.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
6 shares

Feedback to editors

User comments