Reconstructing the acoustics of Notre Dame

Reconstructing the acoustics of Notre Dame
Brian FG Katz and colleagues set up an artificial head to take acoustical measurements at Notre Dame in 2013. Credit: Brian FG Katz/CNRS

The April 15 fire that devastated the roof of the 850-year-old Notre Dame de Paris Cathedral left many people around the globe wondering whether it's possible to rebuild it in a way that can recreate the cultural icon's complex signature acoustics.

Other cathedrals may seem to have similar acoustics, but no two are the same in the way sound soars and reverberates inside. Myriad nuances and details are unique—many of which are likely to change during the course of centuries as furnishings and renovations evolve.

Six years ago, on April 24, 2013, Brian FG Katz, a Fellow of the Acoustical Society of America and CNRS research director at Sorbonne Université, and colleagues obtained detailed of the acoustics of the main space within Notre Dame.

Those measurements and the methods his team used to obtained them were detailed in several publications in the ASA's flagship publication, the Journal of the Acoustical Society of America, and one of Katz's students is presenting some of the work later this month at the 177th Meeting of Acoustical Society of America in Louisville, Kentucky.

These measurements hold new significance now, Katz said. They document the acoustic conditions of the cathedral before the fire and can be used during its restoration. He is available to answer questions from reporters about the work and reconstructing the complex acoustics of Notre Dame.

"The acoustics of worship spaces has long been a topic of interest and is an active area of study right now," said Katz. "Acoustics within churches and places of worship, in general, vary greatly with the associated religious practices. Some emphasize the intelligibility of the spoken word, while others focus on the ritual aspects and musical nature. A grand church organ, for example, played within a dry room suited to speech can sound more like an accordion—without the reverberation mixing effect of the acoustics."

How they captured the acoustics of Notre Dame

"The basic practice of measuring the acoustics of rooms is common across spaces," Katz said. "We don't use any special cathedral protocols. But for the long reverberation time and the considerable volume, we had to work to get our signal-to-noise level to an adequate level."

Measurements were made using a collection of omnidirectional, 3-D (first order ambisonic), and dummy head (binaural) microphones. Several dodecahedron loudspeakers were situated at key positions inside the cathedral, representing either typical source positions or those measurement positions of a series of measurements carried out by the same lab in 1987.

"We also included several balloon bursts as a safeguard, well aware of their acoustic limitations," Katz said. That work was published in 2011 in JASA (see

The researchers use mostly pro-audio hardware because it often provides a better signal-to-noise ratio and the installation is easier than laboratory measurement equipment.

"Technically speaking, we used a 20-second exponential sweep-sine signal, or chip, and deconvolution to obtain the room impulse response. This response, or the acoustic signature, for each source/receiver pair in effect characterizes how the room transforms the sound from source to receiver," Katz said. "Once set up, the measurements took a little more than one hour and mostly involved moving microphones around."

Getting access to iconic sites like Notre Dame is always difficult, and the time inside to record measurements always goes by fast. "One advantage of such a space is the relatively flat floor, which allowed us to have the majority of our equipment on a cart that can be rolled down the aisle," Katz said. "This is in stark contrast to when we do measurements within concert halls with different levels and balconies."

"Reverberant energy"—Notre Dame's full sound

With a 6-second reverberation time at mid-frequencies, Katz describes Notre Dame's sound as being "as full as you can imagine, with the reverberant energy coming from all around. As you move within the space, the acoustics varies due to changes in ceiling height, for example. This is very noticeable and can be heard on our online simulation example as you travel around the cathedral."

From the measurements and other documentation they were able to obtain at Notre Dame, Katz and colleagues created a geometrical acoustic room model and calibrated it to the measured responses' acoustic parameters using CATT-Acoustics (, a numerical simulation software used by acoustic consultants. That work was published in JASA in 2016 (see

"Using this model, we simulated new room impulse responses that correspond to an orchestra configuration of a close-mic recording session made within the cathedral by the Conservatoire National Supérieur de Musique et de Danse de Paris (CNSMDP), a college of music and dance," Katz explained. "By feeding these recordings to the appropriate source positions in the model, we were able to recreate the acoustic performance of this concert—allowing the listener to move within the cathedral to explore and experience the complex acoustics of this large and historic space."

For these simulations, "the sheer size and long reverberation time of the cathedral means longer calculation times, longer impulse responses, longer processing times, and more computational requirements," Katz added. "These demands were far beyond what we experienced with other sites, and small fluctuations in air temperature resulted in misalignment of impulse responses. This, in turn, resulted in artificially reduced reverberation times for averaged measurements, so we developed a method to correct for it that can also be used as a way to measure small changes in mean temperature."

Play it forward: The reconstruction of Notre Dame

How can Katz's acoustic measurements help with the reconstruction of Notre Dame Cathedral? First, the existence of acoustic documentation of the cathedral is a huge benefit.

"It can help during renovation works when considering how the impact of any choices might change the acoustics, such as choice of materials," Katz said. "It's not clear yet what state the interior finishes are in, but the wooden panels and paintings within the cathedral are not at all insignificant when it comes to acoustics. Compared to the raw stone structure, these small elements act as possible absorption and diffusion and can have significant impacts on the resulting acoustics."

The second benefit is virtual reconstruction—essentially providing a way for people to listen to performances within the "lost" acoustics. "This could be via working with the CNSMDP to process the full recording of the concert we presented an excerpt of on YouTube, or to process other recordings made using the same procedure. This approach can also be used to listen to 'new' performances within the that never occurred there—enabling even live performances to be broadcast as a concert within the virtual Notre Dame. These could be of interest during the reconstruction, while the building is inaccessible to the public."

More information: Brian F. Katz et al. Experience with a virtual reality auralization of Notre-Dame Cathedral, The Journal of the Acoustical Society of America (2017). DOI: 10.1121/1.4987161

Barteld N. J. Postma et al. Correction method for averaging slowly time-variant room impulse response measurements, The Journal of the Acoustical Society of America (2016). DOI: 10.1121/1.4955006

Citation: Reconstructing the acoustics of Notre Dame (2019, May 6) retrieved 15 June 2024 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Seeing with your ears: Novel acoustics project aims to improve virtual reality, explore ear shape effects on 3-D sound


Feedback to editors