Perovskite/CIGS tandem cell with record efficiency of 24.6 percent

September 24, 2018, IMEC
Perovskite/CIGS tandem cell with record efficiency of 24.6 percent
Credit: IMEC

Today at the EU PVSEC conference, imec, the world-leading research and innovation hub in nanoelectronics, energy and digital technologies, presents a thin-film tandem solar cell consisting of a top perovskite cell developed by Imec within the partnerships of EnergyVille and Solliance, and a bottom CIGS cell from the Centre for Solar Energy and Hydrogen Research (ZSW, Stuttgart, Germany). The tandem cell resulting from this collaboration achieves a record efficiency of 24.6 percent.

The perovskite top cell in the tandem uses light in the visible part of the solar spectrum, while the light in the near-IR spectrum that passes through the perovskite cell is harvested by the underlying CIGS cell. In this way, the tandem cell significantly outperforms the stand-alone perovskite and CIGS cells. Moreover, both perovskite and CIGS cells are thin-film solar cells, paving the way to high efficiency and building integrated photovoltaic (BIPV) solutions.

The 4-terminal tandem consists of a stacked on top of a CIGS cell, based on a fully scalable device concept to enable industrial adoption of the process. The new record efficiency of 24.6 percent was achieved thanks to several innovations. First of all, the transmittance of the perovskite cell for near-IR light was improved by adding optical coupling layers to the tandem stack and by optimizing the transparent electrodes. Secondly, the perovskite itself was optimized in terms of a wide bandgap of 1.72eV for higher tandem efficiency.

The CIGS cell of 0.5cm² size has been made at the high-efficiency line at ZSW, employing all optimized processes necessary for the preparation of record devices. It thus was the ideal sample for combination with the perovskite cell. Further improvements of the will ultimately pave the way to thin-film with efficiencies of more than 30 percent.

"We work on two types of ," explains Tom Aernouts, group leader for thin-film photovoltaics at imec/EnergyVille. "We combine our state-of-the-art perovskite technology with silicon or CIGS bottom cells. The advantage of CIGS is that it is a thin-film technology, just like perovskite, and that the tandem cells therefore can be fabricated in a wide variety of shapes and sizes. This makes it possible to use this technology in building-integrated PV applications. Future work will focus on upscaling the technology towards larger modules. Moreover, we will also look into developing solutions for two-terminal cells because of their importance to the PV industry. In the end, it's the adoption of our results by our industrial partners that's important."

"We owe the record efficiency to two factors," says Prof. Dr. Michael Powalla, member of the board and head of the Photovoltaics Division at ZSW. "On the one hand to the improved perovskite cell, on the other hand to one of the world's best efficiencies for CIGS cells. There are several parameters of the CIGS cell which we can optimize with regard to its combination with the top cell. Thus, we expect even better efficiency values in the future, paving the way to further cost reductions."

This achievement results from a lasting international collaboration of imec, ZSW and Karlsruhe Institute of Technology.

Explore further: Stacked perovskite/CIGS solar module achieves unprecedented efficiency at 17.8 percent

Related Stories

Record for perovskite/CIGS tandem solar module

October 6, 2016

Thin-film technologies can dramatically reduce the cost of next-generation solar modules. Whereas their production cost is low, it is in particular the combination of complementary absorber materials in a tandem solar module ...

Interest in tandem solar cells heats up

June 13, 2018

For decades, silicon solar cells have been used to convert energy from sunlight into electricity. However, recent improvements in perovskite alternatives are moving tandem devices—made of both silicon and perovskite—closer ...

First semi-transparent perovskite modules

May 25, 2016

Nanoelectronics research center imec, partner in Solliance, presented today the first-ever semi-transparent perovskite PV-module, achieving power conversion efficiencies up to 12%. The technology enables for semi-transparent ...

Recommended for you

Team breaks world record for fast, accurate AI training

November 7, 2018

Researchers at Hong Kong Baptist University (HKBU) have partnered with a team from Tencent Machine Learning to create a new technique for training artificial intelligence (AI) machines faster than ever before while maintaining ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.