The limits of friction

March 29, 2018, University of Konstanz

Friction is created when two surfaces slide one on top of the other. Since this consumes additional energy, this so-called sliding friction is considered an irksome yet inevitable aspect of dynamic processes. However, to set a stationary object in motion, its static friction must be overcome first. In collaboration with their Italian colleagues, researchers from the University of Konstanz have demonstrated how to entirely suppress static friction between two surfaces. This means that even a minuscule force suffices to set objects in motion. Especially in micromechanical parts, where only small forces are at play, a vanishing static friction can lead to hugely improved levels of efficiency. These findings have been published in the current edition of the online journal Physical Review X (PRX).

To move a block of wood across a table one needs to pull it. When Leonardo da Vinci examined this deceptively simple relationship systematically more than 500 years ago, he discovered the basic laws of sliding friction. Since sliding friction usually generates heat, one must pull constantly on the chunk of wood to make up for frictional losses. However, to generate motion in the first place, it is not sliding friction but static friction that must be overcome. Static friction is typically larger than sliding friction and a result of the atomic structure of the contact surfaces locking into place. The surfaces can only free themselves and move against each other once the applied force has reached adequate levels.

Working with physicists from the Universities of Milan and Trieste, a University of Konstanz working group led by Professor Clemens Bechinger was able to conduct experiments and numerical simulations confirming a prediction made by the physicist Serge Aubry in the 1980s: He postulated that, if the lattice spacing between particles in one surface were to differ slightly from the lattice spacing in the other, friction between the two surfaces should disappear entirely. This is even expected to apply if the two surfaces are pressed together. In practical terms, this would mean that a randomly small force would suffice to move a chunk of wood weighing tons across a surface.

This effect can be observed particularly well in ideal contacts, where both surfaces are perfectly flat against each other. It is these kinds of surfaces that Clemens Bechinger and his team were able to create in a model system: Using laser beams and glass spheres in the mircometre range, so-called colloids, they were able to create a two-dimensional model of two surfaces rubbing against each other. Since the electrically charged spheres repel each other, they position themselves in a periodically ordered flat layer. This colloid monolayer forms one of the two surfaces. The researchers created the second beneath the layer of colloids by using three . As a result of their superposition a light crystal forms, which is a sort of optical egg crate with recesses and ridges. "In comparison to real surfaces, these optical surfaces have the added advantage of being entirely transparent, which means that we can directly observe the processes at work between them using a microscope," says Thorsten Brazda, the doctoral researcher who conducted the experiments in Bechinger's group for his doctoral thesis.

While Aubry restricted his prediction to one-dimensional contacts at zero-point temperatures, the research collaboration was able to prove that extended, two-dimensional contacts at room temperature can also be put in motion without static friction. "We were able to turn Aubry's artificial one-dimensional set-up into a realistic situation and demonstrate that his idea remains valid in two-dimensional systems and at finite temperatures," Clemens Bechinger says.

Observing particle movements directly also allowed the researchers to understand the disappearance of static friction between the colloid monolayer and the light crystal: It turns out that the colloidal monolayer twists ever so slightly in relation to the optical grid. That way, the particles do not lock on to the recesses of the substrate, which they would not find it easy to escape from. Instead, some of them position themselves around the ridges. If external force is applied, these particles do not have to escape from the recesses but are free to move straight away as soon as a minimum amount of is exerted. Static friction disappears.

These results, which are in excellent agreement with the numerical simulations performed by the Italian team, show that static friction cannot only be suppressed, but also generated as desired if the contact pressure between the two surfaces is increased. This is important insofar as static friction – in contrast to sliding – is often a desired phenomenon. It enables us to grasp objects safely and ensures that wheels have sufficient grip. This way of varying creates new opportunities for moving objects easily across surfaces and to lock them into place safely. This would be of immense advantage in micro- and nanomechanical gearboxes or couplings, since, here, typically only very small forces are at play.

More information: T. Brazda et al. Experimental Observation of the Aubry Transition in Two-Dimensional Colloidal Monolayers, Physical Review X (2018). DOI: 10.1103/PhysRevX.8.011050

Related Stories

Understanding the wetting of micro-textured surfaces can help give them new functionalities

February 22, 2018

The wetting and adhesion characteristics of solid surfaces critically depend on their fine structures. However, until now, our understanding of exactly how the sliding behaviour of liquid droplets depends on surface microstructures ...

Laser-cooled ions contribute to better understanding of friction

July 14, 2017

In physics, it is useful to know as precisely as possible how friction phenomena arise—and not only on the macroscopic scale, as in mechanical engineering, but also on the microscopic scale, in areas such as biology and ...

Droplet friction found to be similar to that of solid objects

November 8, 2017

(Phys.org)—A team of researchers working at the Max Planck Institute for Polymer Research has found through experimentation that friction in sliding drops is similar in some ways to that of solid objects. In their paper ...

Finnish researchers find explanation for sliding friction

May 29, 2012

Friction is a key phenomenon in applied physics, whose origin has been studied for centuries. Until now, it has been understood that mechanical wear-resistance and fluid lubrication affect friction, but the fundamental origin ...

On the edge of friction

December 20, 2011

(PhysOrg.com) -- The problem exists on both a large and a small scale, and it even bothered the ancient Egyptians. However, although physicists have long had a good understanding of friction in things like stone blocks being ...

Researchers demonstrate method that reduces friction between two surfaces to almost zero at macroscopic scale

May 15, 2015

(Phys.org)—A team of researchers working at Argonne National Laboratory, in Illinois, has found a way to dramatically reduce friction between two macroscopic scale surfaces—to near zero. In their paper published in the ...

Recommended for you

Scientists produce 3-D chemical maps of single bacteria

November 16, 2018

Scientists at the National Synchrotron Light Source II (NSLS-II)—a U.S. Department of Energy (DOE) Office of Science User Facility at DOE's Brookhaven National Laboratory—have used ultrabright x-rays to image single bacteria ...

Infinite-dimensional symmetry opens up possibility of a new physics—and new particles

November 16, 2018

The symmetries that govern the world of elementary particles at the most elementary level could be radically different from what has so far been thought. This surprising conclusion emerges from new work published by theoreticians ...

Take a weight off: Tears, joy as kilo gets historic update (Update)

November 16, 2018

In a historic vote, more than 50 nations unanimously approved an overhaul of the international measurement system that underpins global trade and other human endeavors, uniting Friday behind new definitions for the kilogram ...

Bursting bubbles launch bacteria from water to air

November 15, 2018

Wherever there's water, there's bound to be bubbles floating at the surface. From standing puddles, lakes, and streams, to swimming pools, hot tubs, public fountains, and toilets, bubbles are ubiquitous, indoors and out.

Scientists provide first-ever views of elusive energy explosion

November 15, 2018

Researchers at the University of New Hampshire have captured a difficult-to-view singular event involving "magnetic reconnection"—the process by which sparse particles and energy around Earth collide producing a quick but ...

Terahertz laser pulses amplify optical phonons in solids

November 15, 2018

A study led by scientists of the Max Planck Institute for the Structure and Dynamics of Matter (MPSD) at the Center for Free-Electron Laser Science in Hamburg/Germany presents evidence of the amplification of optical phonons ...