Reinventing the inductor

February 21, 2018 by James Badham, University of California - Santa Barbara
Artist's depiction of the intercalated multilayer-graphene inductor (center blue spiral). Background images show its predecessors. Credit: Peter Allen

A basic building block of modern technology, inductors are everywhere: cellphones, laptops, radios, televisions, cars. And surprisingly, they are essentially the same today as in 1831, when they were first created by English scientist Michael Faraday.

The particularly large size of inductors made according to Faraday's design are a limiting factor in delivering the miniaturized devices that will help realize the potential of the Internet of Things, which promises to connect people to some 50 billion objects by 2020. That lofty goal is expected to have an estimated economic impact between $2.7 and $6.2 trillion annually by 2025.

Now, a team at UC Santa Barbara, led by Kaustav Banerjee, a professor in the Department of Electrical and Computer Engineering, has taken a materials-based approach to reinventing this fundamental component of modern electronics. The findings appear in the journal Nature Electronics.

Banerjee and his UCSB team—lead author Jiahao Kang, Junkai Jiang, Xuejun Xie, Jae Hwan Chu and Wei Liu, all members of his Nanoelectronics Research Lab—worked with colleagues from Shibaura Institute of Technology in Japan and Shanghai Jiao Tong University in China to exploit the phenomenon of kinetic to demonstrate a fundamentally different kind of inductor.

All inductors generate both magnetic and kinetic inductance, but in typical metal conductors, the kinetic inductance is so small as to be unnoticeable. "The theory of kinetic inductance has long been known in condensed-matter physics, but nobody ever used it for inductors, because in conventional metallic conductors, kinetic inductance is negligible," Banerjee explained.

Unlike magnetic inductance, kinetic inductance does not depend on the surface area of the inductor. Rather, kinetic inductance resists current fluctuations that alter the velocity of the electrons, and the electrons resist such change according to Newton's law of inertia.

Historically, as the technology of transistors and interconnects that link them has advanced, the elements have become smaller. But the inductor, which in its simplest form is a metallic coil wound around a core material, has been the exception.

"On-chip inductors based on magnetic inductance cannot be made smaller in the same way transistors or interconnects scale, because you need a certain amount of surface area to get a certain magnetic flux or inductance value," explained lead author Kang, who recently completed his Ph.D. under Banerjee's supervision.

The UCSB team designed a new kind of spiral inductor comprised of multiple layers of graphene. Single-layer graphene exhibits a linear electronic band structure and a correspondingly large momentum relaxation time (MRT)—a few picoseconds or higher compared to that of conventional metallic conductors (like copper used in traditional on-chip inductors), which ranges from 1/1000 to 1/100 of a picosecond. But single-layer graphene has too much resistance for application on an inductor.

However, multilayer graphene offers a partial solution by providing lower resistance, but interlayer couplings cause its MRT to be insufficiently small. The researchers overcame that dilemma with a unique solution: They chemically inserted bromine atoms between the graphene layers—a process called intercalation—that not only further reduced resistance but also separated the graphene layers just enough to essentially decouple them, extending the MRT and thereby increasing kinetic inductance.

The revolutionary inductor, which works in the 10-50 GHz range, offers one-and-a-half times the inductance density of a traditional inductor, leading to a one-third reduction in area while also providing extremely high efficiency. Previously, high inductance and reduced size had been an elusive combination.

"There is plenty of room to increase the inductance density further by increasing the efficiency of the intercalation process, which we are now exploring," said co-author Jiang.

"We essentially engineered a new nanomaterial to bring forward the previously 'hidden physics' of kinetic inductance at room temperature and in a range of operating frequencies targeted for next-generation wireless communications," Banerjee added.

Explore further: High-frequency multilayer inductor series with world's highest inductance value

More information: Jiahao Kang et al. On-chip intercalated-graphene inductors for next-generation radio frequency electronics, Nature Electronics (2018). DOI: 10.1038/s41928-017-0010-z

Related Stories

TDK intros ultra high-Q multilayer inductors

April 6, 2012

TDK Corporation presented the new MHQ1005P series of multilayer ceramic inductors with a Q factor that, depending on the type, is as good or much better than comparable, but more expensive, wirewound inductors. The new multilayer ...

The first broadband amplifier using vertical inductors

December 5, 2014

Researchers at the Dresden University of Technology in Germany have proposed the first broadband amplifier using vertical inductors. All circuits are built from passive components, and improved chip design requires passive-component ...

Multilayer ceramic coils with the highest inductance

August 26, 2011

TDK-EPC, a group company of TDK Corporation, presents the TDK MLG0603S series of multilayer ceramic coils with the world’s highest inductance values. These 0603 inductors feature an inductance of up to 180 nH at 100 ...

Self-rolled tubes make miniature electronics

December 12, 2012

(—With downscaling as one of the main pursuits in electronics research today, scientists and engineers are developing a variety of miniaturization strategies, from those involving powerful microscopes to self-assembly ...

Recommended for you

'Smart skin' simplifies spotting strain in structures

November 15, 2018

Thanks to one peculiar characteristic of carbon nanotubes, engineers will soon be able to measure the accumulated strain in an airplane, a bridge or a pipeline – or just about anything – over the entire surface or down ...

Stealth-cap technology for light-emitting nanoparticles

November 14, 2018

A team of scientists from the Helmholtz-Zentrum Dresden-Rossendorf (HZDR), in collaboration with researchers from Monash University Australia, has succeeded in significantly increasing the stability and biocompatibility of ...


Adjust slider to filter visible comments by rank

Display comments: newest first

3 / 5 (2) Feb 22, 2018
use of graphene is not a big surprise, but use of bromine intercalation is really brilliant!
Thorium Boy
2 / 5 (1) Feb 22, 2018
estimated economic impact between $2.7 and $6.2 trillion annually by 2025.
2 / 5 (1) Feb 22, 2018
estimated economic impact between $2.7 and $6.2 trillion annually by 2025.

People who report stuff like this seem to find it imperative to attach some financial number to whatever phenomenon they are writing about. I find it as easy to ignore as the writer finds it to pull it out of their ass.
3 / 5 (2) Feb 22, 2018
Estimating that these new inductors wind up being used in all the different consumer goods in my life? I count two dozen machines using some form of electronic controls. Today.

Estimating a low cost of 1/10th of a% of retail price.

Today, my low-ball, guesstimated total would be about $200 for 2doz inductors.

Use that figure times one billion consumers in my economic demograph. Comes to a deliberately conservative $200 billion.

Considering the metals such as copper used in Today's inductors, I would think that bromine and graphene should be cheaper?

So I would guess, even with rising consumer demands. In addition to all the industrial, military, transportation, communication, emergency services, commercial, public infrastructure and so on? I would think a trillion dollars would be a more reasonable estimate by 2025. Spent solely for the new inductors.

Then again, I am happy that I did not listen to the panicmongers who urged me to sell my Apple stock short.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.