Novel approach to concrete protection slows deterioration in harsh conditions

December 5, 2017 by Tim Pilgrim, Brunel University
The material works by absorbing water that exists within the concrete to form crystals . Credit: Brunel University

Using crystallising admixture and wax-based curing agents significantly improves the performance of concrete in harsh conditions, a new study from Brunel University London suggests.

Researchers discovered that concrete facing a harsh environment – for example heavy rainfall or high winds – deteriorates slower when a crystallising material is added to the fresh mixture, followed by a wax-based curing agent.

The findings, published in the journal Construction and Building Materials, could help increase the lifespan and reduce the long-term cost of concrete structures in severe conditions.

"Concrete under harsh environmental conditions suffers from accelerated deterioration, which reduces the service life of any that is built from concrete or reinforced concrete, such as bridges, ports or airport runways," said Mazen Al-Kheetan, a PhD candidate who led the research.

"Industry has been trying to overcome this problem by applying different types of waterproofing and protective materials, which are mainly Silane or Siloxane based, but the problem with those materials is high toxicity and a dangerous impact on the environment."

Working alongside Texan company Chem-Crete, Brunel's researchers created a new protection-curing blend that reduces the penetration of and , whilst increasing the compressive strength compared to untreated concrete. Unlike most traditional treatments, it can be applied to fresh, uncured concrete, potentially cutting costs and saving time.

"It's environmentally friendly and can be applied on dry and wet surfaces of concrete without affecting its performance," said Mr Al-Kheetan.

"The material works by absorbing water that exists within the concrete to form crystals. Whenever the crystals are formed they line the pores of the concrete, allowing it to breath. It also works on repelling water that tries to penetrate through.

"This novel approach will help protect any concrete structure – and even masonry and heritage structures – from the penetration of water and harmful chemicals like chlorides and sulphates."

Mr Al-Kheetan tested the new material's effectiveness by applying it to the surface of fresh concrete, followed an hour later by either a wax-based or liquid-based curing agent. Under lab conditions, it was then bombarded with sustained harsh weather.

Tests after seven days, and again after 28 days, showed that a combination of crystallising admixture and wax-based curing agent increased the concrete's compressive strength, whilst decreasing its water absorption.

Dr. Mujib Rahman, Brunel's Senior Lecturer in Civil Engineering who supervised the research said: "This discovery will allow people to use concrete protection materials with fresh concrete at the construction stage, eliminating the need to apply traditional protection, which has often shown inconsistent performance.

"It will also reduce the number of maintenance procedures required to increase the lifetime of concrete or masonry structures, reducing long term expenditure."

Research is now underway to investigate the performance of other hydrophobic protective that are environmentally friendly, can reduce water absorption level, and be applied to fresh concrete.

Explore further: Researcher tests fly ash for stronger concrete

More information: Mazen J. Al-Kheetan et al, A novel approach of introducing crystalline protection material and curing agent in fresh concrete for enhancing hydrophobicity, Construction and Building Materials (2017). DOI: 10.1016/j.conbuildmat.2017.11.108

Related Stories

Researcher tests fly ash for stronger concrete

March 15, 2017

Portland cement has been around for more than 250 years as the binding material for concrete, mortar and stucco, but a Missouri University of Science and Technology researcher is studying ways to make concrete without the ...

A self-healing protective coating for concrete

February 20, 2013

Scientists are reporting development of what they describe as the first self-healing protective coating for cracks in concrete, the world's most widely used building material. Their study on the material—which is inexpensive ...

Turning sewage sludge into concrete

August 27, 2015

The disposal of sludge from sewage water treatment is a big issue for wastewater plants in Malaysia. While studies show that the volume of sludge is expected to rise, disposal options are limited due to stricter environmental ...

Recommended for you

Machine learning identifies links between world's oceans

March 21, 2019

Oceanographers studying the physics of the global ocean have long found themselves facing a conundrum: Fluid dynamical balances can vary greatly from point to point, rendering it difficult to make global generalizations.

How fluid viscosity affects earthquake intensity

March 21, 2019

Fault zones play a key role in shaping the deformation of the Earth's crust. All of these zones contain fluids, which heavily influence how earthquakes propagate. In an article published today in Nature Communications, Chiara ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.