One-way track for microwaves based on mechanical interference

September 19, 2017
Implementation of a superconducting microwave circuit optomechanical device for nonreciprocity. Credit: Nature Communications (2017). DOI: 10.1038/s41467-017-00447-1

Devices that allow to route microwave signals are essential engineering tools. In particular, isolators, which let signals flow in one direction but block them in the other, are needed to protect sensitive equipment from harm. Now, scientists at EPFL and the University of Cambridge have demonstrated a new principle for developing such tools by harnessing the motion of microscopic drums. The study is published in Nature Communications.

The work was carried out by the lab of Tobias Kippenberg at EPFL, with theoretical support from the group of Andreas Nunnenkamp from the University of Cambridge. All samples were fabricated in the Center of MicroNanoTechnology (CMi) at EPFL. The demonstrated device consists of two resonant superconducting that are linked through a shared a capacitor. The top metallic membrane of this capacitor floats freely and supports mechanical oscillations, acting like a micro-drum, only 30 microns in diameter.

The vibrations modify the resonance frequencies of the microwave circuits and modulate the signals. Conversely, the electric field of signals exerts a force that changes the motion of the drum. This bi-directional interaction enables the conversion of signals from one microwave circuit to the other; the incoming signal is first converted to a vibrating motion, and then the motion itself is converted to a second signal emerging from the other circuit.

In the experiment, two different modes of oscillation of the micro-drum motion are used. These represent two paths for the to be converted from one circuit to the other, resulting in interference, which, surprisingly, is not symmetrical in either direction of signal conversion.

The system can be tuned in such a way that positive interference occurs in one direction, while destructive interference occurs in the other. This realizes a microwave that lets signals propagate only in a chosen direction, and the parameters can be modified on the fly, allowing dynamically reconfigurable use of the isolator, instantly changing its direction.

While commercial microwave isolators are common, they typically rely on magnetic ferrite materials and . This makes them impractical to use with superconducting qubits, which are becoming the leading candidates to use as building blocks for a quantum computer. But the lifetime of the fragile quantum states of the qubits is easily disturbed by magnetic fields, meaning that the ferrite isolators must be heavily shielded to prevent leaking that can limit their use. For this reason, there has recently been substantial research activity to develop alternative technologies. The optomechanical isolator created at EPFL joins other prototypes—such as those using Josephson junctions—that might form a new platform to build such devices in the future.

Explore further: Quantum reservoir for microwaves

More information: N. R. Bernier et al, Nonreciprocal reconfigurable microwave optomechanical circuit, Nature Communications (2017). DOI: 10.1038/s41467-017-00447-1

Related Stories

Quantum reservoir for microwaves

May 15, 2017

In a recent experiment at EPFL, a microwave resonator, a circuit that supports electric signals oscillating at a resonance frequency, is coupled to the vibrations of a metallic micro-drum. By actively cooling the mechanical ...

Using graphene to create quantum bits

May 18, 2017

In the race to produce a quantum computer, a number of projects are seeking a way to create quantum bits—or qubits—that are stable, meaning they are not much affected by changes in their environment. This normally needs ...

Slowing down microwaves in a chip

January 31, 2013

EPFL scientists have succeeded in capturing a microwave pulse within a chip for several milliseconds before releasing it with little loss. This extraordinary delay normally requires hundreds of miles of electrical cable, ...

Tiny graphene drum could form future quantum memory

August 28, 2014

Scientists from TU Delft's Kavli Institute of Nanoscience have demonstrated that they can detect extremely small changes in position and forces on very small drums of graphene. Graphene drums have great potential to be used ...

Recommended for you

Physicists design $100 handheld muon detector

November 20, 2017

At any given moment, the Earth's atmosphere is showered with high-energy cosmic rays that have been blasted from supernovae and other astrophysical phenomena far beyond the Solar System. When cosmic rays collide with the ...

A curious quirk brings organic diode lasers one step closer

November 20, 2017

Since their invention in 1962, semiconductor diode lasers have revolutionized communications and made possible information storage and retrieval in CDs, DVDs and Blu-ray devices. These diode lasers use inorganic semiconductors ...

Carefully crafted light pulses control neuron activity

November 17, 2017

Specially tailored, ultrafast pulses of light can trigger neurons to fire and could one day help patients with light-sensitive circadian or mood problems, according to a new study in mice at the University of Illinois.

Strain-free epitaxy of germanium film on mica

November 17, 2017

Germanium, an elemental semiconductor, was the material of choice in the early history of electronic devices, before it was largely replaced by silicon. But due to its high charge carrier mobility—higher than silicon by ...


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.