Group's measuring tool probes solar-cell materials

June 12, 2017 by Tom Fleischman, Cornell University

Next-generation solar cells made from organic compounds hold great promise in meeting future energy needs, but researchers are still striving to gain a deep understanding of the materials involved – including the efficiency with which they convert light into mobile charge, known as photocapacitance.

A Cornell research group led by John Marohn, professor in the Department of Chemistry and Chemical Biology, has proposed a unique method for recording and measuring light-induced mobile charge – at nanoscale lengths and nanosecond time scales – at different areas in a heterogeneous solar-cell material.

Their approach involves a charged microcantilever, which experiences a slight shift in oscillation phase as a result of interaction with a nearby electrically charged material. Marohn likens the technique to how a clock might get affected by an electrical charge, where the difference cannot be seen in real time but the charge's effect is evident when you compare that clock to an unaffected one.

"The clocks both go around once an hour," Marohn said, "but one will advance slightly as a result of the interaction with the charge. And by comparing the two clocks, you can see that the one picked up a little extra angle."

Their paper, "Microsecond photocapacitance transients observed using a charged microcantilever as a gated mechanical integrator," was published June 9 in Science Advances. Marohn's collaborators were doctoral students Ryan Dwyer and Sarah Nathan, who share lead-author credit.

The group has applied for patent protection for the technique it developed for this work – phase-kick electric force microscopy (pk-EFM) – with Cornell's Center for Technology Licensing.

One of the inefficiencies of organic solar-cell materials that Marohn and his group are addressing is recombination. When sunlight hits the material, it creates free charges (negatively charged electrons and positively charged holes) that get turned into electric current. But not all of those free charges escape the cell and turn into current; those that do not turn into current recombine, with the byproduct being heat.

The ability to "see" – or, more accurately, measure – charge generation and recombination following a burst of light was the group's thrust behind developing pk-EFM. A conductive cantilever is placed near an organic semiconductor film; a voltage pulse is applied to the cantilever, while a carefully timed light pulse is applied to the sample.

The cantilever's oscillation frequency is shifted slightly by the electrostatic interactions with the mobile charges in the sample. Those interactions result in a , or "phase kick" as the group calls it. This phase shift persists for a long time (nearly a second) and is therefore relatively easy to measure accurately.

The researchers study this phase shift as a function of the nanosecond time delay between the light pulses and voltages pulses. In this way, the researchers are able to indirectly infer what happened to charges on the nanosecond time scale without having to observe the charge directly, in real time.

"What we wanted was a way to see, in these tiny regions where different molecules are concentrated, how the charges recombine in the various regions of the sample," Marohn said. "We're trying to watch things that are both very fast and very small."

The group's work is trying to probe more deeply the photocapacitance of organic bulk materials that have previously been examined using time-resolved electric force microscopy. Future work will focus on getting even better spatial and temporal resolution in hopes of ultimately determining which combination of materials is optimal for efficient solar power.

"Solar cells work OK, and we don't really understand how they work," Marohn said. "It seems like, if you really understood how they worked, you could make them a lot better. And this is one way to try to figure that out."

Explore further: Driving toward more efficient solar cells

More information: Microsecond photocapacitance transients observed using a charged microcantilever as a gated mechanical integrator. Science Advances DOI: 10.1126/sciadv.1602951

Related Stories

Driving toward more efficient solar cells

July 11, 2016

For solar energy to become a real power player in the energy game, solar cells need to be both inexpensive to manufacture and efficient in terms of energy they collect. That's why researchers are focusing their efforts on ...

New technique opens up advanced solar cells

September 2, 2016

In a photovoltaic cell, light generates opposite charges in the active layer. The charges must then be separated as quickly as possible to keep them from recombining. Positive charges are driven by a built-in electric field ...

Domain size and purity key to efficient organic solar cells

December 14, 2015

As solar energy becomes more popular, the drive to create more efficient, less expensive solar cells increases. Solar energy is abundant, but the devices we use to collect that energy have an efficiency problem – currently, ...

Solar cells with nanostripes

May 2, 2017

Solar cells based on perovskites reach high efficiencies: They convert more than 20 percent of the incident light directly into usable power. On their search for underlying physical mechanisms, researchers of the Karlsruhe ...

Researchers are on the path to creating nano-MRI images

December 22, 2009

( -- Cornell researchers are devising methods to detect the magnetic fields of individual electrons and atomic nuclei, which they hope to use to make a nanoscale version of magnetic resonance imaging.

Recommended for you

Detecting metabolites at close range

June 22, 2018

A novel concept for a biosensor of the metabolite lactate combines an electron transporting polymer with lactate oxidase, which is the enzyme that specifically catalyzes the oxidation of lactate. Lactate is associated with ...

CryoEM study captures opioid signaling in the act

June 22, 2018

Opioid drugs like morphine and fentanyl are a mainstay of modern pain medicine. But they also cause constipation, are highly addictive, and can lead to fatal respiratory failure if taken at too high a dose. Scientists have ...

Researchers achieve unprecedented control of polymer grids

June 21, 2018

Synthetic polymers are ubiquitous—nylon, polyester, Teflon and epoxy, to name just a few—and these polymers are all long, linear structures that tangle into imprecise structures. Chemists have long dreamed of making polymers ...

Template to create superatoms could make for better batteries

June 21, 2018

Virginia Commonwealth University researchers have discovered a novel strategy for creating superatoms—combinations of atoms that can mimic the properties of more than one group of elements of the periodic table. These superatoms ...


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.