Nanoengineers 3-D print lifelike, functional blood vessel network that could pave the way toward artificial organs

March 2, 2017
Nanoengineering professor Shaochen Chen 3-D prints a biomimetic blood vessel network. Credit: Erik Jepsen/UC San Diego Publications

Nanoengineers at the University of California San Diego have 3D printed a lifelike, functional blood vessel network that could pave the way toward artificial organs and regenerative therapies.

The new research, led by nanoengineering professor Shaochen Chen, addresses one of the biggest challenges in : creating lifelike tissues and organs with functioning vasculature—networks of that can transport blood, nutrients, waste and other biological materials—and do so safely when implanted inside the body.

Researchers from other labs have used different 3D printing technologies to create . But existing technologies are slow, costly and mainly produce simple structures, such as a single blood vessel—a tube, basically. These blood vessels also are not capable of integrating with the body's own vascular system.

"Almost all tissues and organs need blood vessels to survive and work properly. This is a big bottleneck in making organ transplants, which are in high demand but in short supply," said Chen, who leads the Nanobiomaterials, Bioprinting, and Tissue Engineering Lab at UC San Diego. "3D bioprinting organs can help bridge this gap, and our lab has taken a big step toward that goal."

Chen's lab has 3D printed a vasculature network that can safely integrate with the body's own network to circulate blood. These blood vessels branch out into many series of smaller vessels, similar to the blood vessel structures found in the body. The work was published in Biomaterials.

A digital model of a blood vessel network. Credit: Erik Jepsen/UC San Diego Publications

Chen's team developed an innovative bioprinting technology, using their own homemade 3D printers, to rapidly produce intricate 3D microstructures that mimic the sophisticated designs and functions of biological tissues. Chen's lab has used this technology in the past to create liver tissue and microscopic fish that can swim in the body to detect and remove toxins.

Researchers first create a 3D model of the biological structure on a computer. The computer then transfers 2D snapshots of the model to millions of microscopic-sized mirrors, which are each digitally controlled to project patterns of UV light in the form of these snapshots. The UV patterns are shined onto a solution containing live cells and light-sensitive polymers that solidify upon exposure to UV light. The structure is rapidly printed one layer at a time, in a continuous fashion, creating a 3D solid polymer scaffold encapsulating that will grow and become biological tissue.

"We can directly print detailed microvasculature structures in extremely high resolution. Other 3D produce the equivalent of 'pixelated' structures in comparison and usually require sacrificial materials and additional steps to create the vessels," said Wei Zhu, a postdoctoral scholar in Chen's lab and a lead researcher on the project.

And this entire process takes just a few seconds—a vast improvement over competing bioprinting methods, which normally take hours just to print simple structures. The process also uses materials that are inexpensive and biocompatible.

Chen's team used medical imaging to create a digital pattern of a blood vessel network found in the body. Using their technology, they printed a structure containing endothelial cells, which are cells that form the inner lining of blood vessels.

A microscopic 3-D printed blood vessel structure. Credit: Erik Jepsen/UC San Diego Publications

The entire structure fits onto a small area measuring 4 millimeters × 5 millimeters, 600 micrometers thick (as thick as a stack containing 12 strands of human hair).

Researchers cultured several structures in vitro for one day, then grafted the resulting tissues into skin wounds of mice. After two weeks, the researchers examined the implants and found that they had successfully grown into and merged with the host blood vessel network, allowing blood to circulate normally.

Chen noted that the implanted blood vessels are not yet capable of other functions, such as transporting nutrients and waste. "We still have a lot of work to do to improve these materials. This is a promising step toward the future of tissue regeneration and repair," he said.

Moving forward, Chen and his team are working on building patient-specific tissues using human induced , which would prevent transplants from being attacked by a patient's immune system. And since these cells are derived from a patient's skin cells, researchers won't need to extract any cells from inside the body to build new tissue. The team's ultimate goal is to move their work to clinical trials. "It will take at least several years before we reach that goal," Chen said.

Explore further: Engineers 3-D-print a new lifelike liver tissue for drug screening

More information: Wei Zhu et al, Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture, Biomaterials (2017). DOI: 10.1016/j.biomaterials.2017.01.042

Related Stories

New technique improves blood flow to damaged tissues

January 24, 2017

A gene essential for making blood vessels in embryos can transform amniotic cells into therapeutic blood vessel cells, according to new research from Weill Cornell Medicine investigators. The findings, published Jan. 16 in ...

Liver-like device, via 3-D printer

May 13, 2014

(Phys.org) —Nanoengineers at the University of California, San Diego have developed a 3-D-printed device inspired by the liver to remove dangerous toxins from the blood.

Recommended for you

Chemists create 3-D printed graphene foam

June 21, 2017

Nanotechnologists from Rice University and China's Tianjin University have used 3-D laser printing to fabricate centimeter-sized objects of atomically thin graphene.

Plant inspiration could lead to flexible electronics

June 21, 2017

Versatile, light-weight materials that are both strong and resilient are crucial for the development of flexible electronics, such as bendable tablets and wearable sensors. Aerogels are good candidates for such applications, ...

Neuron transistor behaves like a brain neuron

June 20, 2017

(Phys.org)—Researchers have built a new type of "neuron transistor"—a transistor that behaves like a neuron in a living brain. These devices could form the building blocks of neuromorphic hardware that may offer unprecedented ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.