Lack of fresh water requires development of new desalination methods, including advanced nuclear desalination and water treatment and recycling; requirements for drinking water and other uses may be different.
To improve environmental safety and desalination technology, it is necessary to solve a global scientific and technological problem—the creation of an integrated water supply system based on the use of new high-efficiency desalination methods such as nuclear membrane desalination or hybrid technologies. These methods should be combined with recycling and treatment of residues to a level that corresponds with environmental requirements.
The majority of modern desalination technologies are based on distillation of thermal energy, including nuclear desalination, or using desalination membranes (reverse osmosis and electrodialysis membranes). In the process of distillation, salt water is boiled, and produced steam leaves the system and is condensed as fresh water. If a nuclear reactor is used as the heat source, the method is called nuclear desalination.
The membrane method of reverse osmosis is based on the filtering of salt water under the influence of differential pressure across a semipermeable membrane allowing water molecules and excluding salts; the pressure differential should be more than the so-called osmotic pressure (~ 30 atm. for seawater). In membrane electrodialysis, ions penetrate through the so-called ion-exchange membranes, and fresh water remains in the channel.
These membrane methods can be used in conjunction with nuclear desalination (hybrid desalination technologies), i.e., they can be added to existing nuclear facilities, where there is a relatively cheap access to thermal energy.
For the normal functioning of desalination plants, quality of the source water must meet certain strict requirements. This entails the need for a pre-treatment system, the cost of which is sometimes two to three times more than the cost of the desalination plant itself.
Scientists from the National Research Nuclear University MEPhI (Russia) have developed a new technology and technological schemes for a pretreatment unit taking into account data on the composition of pollutants, salinity and performance of water treatment systems. It is based on the reagent methods with hydrodynamic activation of the process of pollutant withdrawal in coagulation, flocculation and adsorption, which reduces the unit's size and cost. Moreover, the majority of the sparingly soluble salts can be removed in the pretreatment unit, which increases the efficiency of the system as a whole.
From the pre-water treatment unit, salt water flows into the desalination unit, a very energy-intensive process. Hybrid desalination schemes are proposed to reduce the energy consumption of the desalination process. These schemes use distillation and membrane methods in combination, to produce both drinking water and process water.
In addition, the project proposes the development of an integrated technological system of water recycling and desalination systems to reduce environmental burdens and improve the energy efficiency of the system as a whole.
The results are intended to be used in complex projects of the State Corporation Rosatom, in particular, in relation to nuclear power plants in Egypt, where it is planned to realize a nuclear desalination technology.
Provided by National Research Nuclear University