'Seeding' X-ray lasers with conventional lasers could enable new science

June 7, 2016, SLAC National Accelerator Laboratory
X-ray lasers amplify X-ray pulses (shown within the blue ovals) from electron beams (depicted as arrows) inside magnets known as undulators (left). Top: Each pulse normally contains a spectrum of X-ray colors and intensities that changes from pulse to pulse. Bottom: A technique known as echo-enabled harmonic generation (EEHG) could produce stable pulses containing a single X-ray color that vary very little from shot to shot. Credit: SLAC National Accelerator Laboratory

Researchers from the Department of Energy's SLAC National Accelerator Laboratory and Shanghai Jiao Tong University in China have developed a method that could open up new scientific avenues by making the light from powerful X-ray lasers much more stable and its color more pure.

The idea behind the technique is to "seed" X-ray lasers with regular lasers, whose light already has these qualities.

"X-ray lasers have very bright, very short pulses that are useful for all sorts of groundbreaking studies," says SLAC accelerator physicist Erik Hemsing, the lead author of a study published today in Nature Photonics. "But the process that generates those X-rays also makes them 'noisy' – each pulse is a little bit different and contains a range of X-ray wavelengths, or colors – so they can't be used for certain experiments. We've now demonstrated a technique that will allow the use of conventional lasers to make stable, single-wavelength X-rays that are exactly the same from one pulse to the next."

The method, called echo-enabled harmonic generation (EEHG), could enable new types of experiments, such as more detailed studies of electron motions in molecules.

"We need better control over X-ray pulses for such experiments," says Jerome Hastings, a researcher at SLAC's Linac Coherent Light Source (LCLS) X-ray laser, who was not involved in the study. "The new study demonstrates that EEHG is a very promising method to get us there, and it could become a driver for science that can't be done today." LCLS is a DOE Office of Science User Facility.

Planting Seeds of Stability with Conventional Lasers

The process of generating X-ray laser pulses starts with accelerating bunches of electrons to high energies in linear particle accelerators. The speedy electrons then slalom through a special magnet known as an undulator, where they send out X-rays at every turn.

From left: Erik Hemsing, Gennady Stupakov and Bryant Garcia at the EEHG demonstration experiment at SLAC’s Next Linear Collider Test Accelerator (NLCTA). Credit: SLAC National Accelerator Laboratory

Those X-rays, in turn, interact with the , rearranging them into thin slices, or microbunches. The electrons in each microbunch collectively emit light that gets further amplified to produce extremely bright pulses of X-ray laser light.

However, each microbunch of electrons radiates a little bit differently, resulting in X-ray pulses that contain spikes of several wavelengths with different intensities that vary from pulse to pulse. This "noise" poses challenges for applications that require identical X-ray pulses.

"Optical and other conventional lasers, on the other hand, generate single-color light in a highly reproducible way," says co-author Bryant Garcia, a graduate student in SLAC's Accelerator Directorate. "If we could use their regular pulses as 'seeds' to form more regular microbunches in the electron beam, the X-ray laser pulses would also be much more uniform and stable."

Imprinting Echoes of Laser Light onto X-ray Pulses

The problem is that wavelengths of conventional laser light are too long to directly seed the electron bunches. To get around that, researchers must shorten the wavelength by creating "harmonics" – light whose wavelength is a fraction of the original laser light.

"Our study shows for the first time that we can generate the harmonics needed to slice electron bunches finely enough for X-ray laser applications," Hemsing says.

In their demonstration experiment at SLAC's Next Linear Collider Test Accelerator (NLCTA), the researchers shone pairs of laser pulses on electron bunches passing through two magnetic stages, each composed of an undulator and other magnets. The first, optical-wavelength pulse left its "fingerprint" on the electron bunch, while the second, infrared pulse created an "echo" of the first that also contained harmonics.

A SLAC-led research team manipulated a beam of electrons (from top left to bottom right) with conventional laser light (red) in a way that could produce purer, more stable pulses in X-ray lasers. Credit: SLAC National Accelerator Laboratory

Together the laser pulses shuffled the electrons in the bunch so they formed microbunches in a very controlled and reproducible way – stable seeds that could be amplified to produce stable X-rays in future experiments.

A Technique with Perspective for X-ray Lasers around the World

The idea for the method was developed in 2009 by SLAC accelerator physicist Gennady Stupakov, one of the study's co-authors. As a powerful new way of seeding future X-ray lasers, the concept immediately sparked excitement in the global research community. Since then, researchers have been trying to generate higher and higher harmonics, with the goal of reaching X-ray wavelengths of 10 nanometers or less.

Proof-of-principle experiments at the NLCTA began in 2009 with the demonstration of the 3rd harmonic in 2010, 7th harmonic in 2012 and 15th harmonic in 2014.

"We've now reached the infrared laser's 75th harmonic, which allows us to produce microbunches able to generate light with a wavelength of 32 nanometers," Bryant says. "This brings us for the first time within reach of our goal."

Although the method has yet to be implemented at an X-ray laser – the team is planning first X-ray EEHG experiments at the FERMI free-electron laser in Trieste, Italy – its benefits for light sources around the world are foreseeable.

"Since EEHG produces microbunches by using well-defined laser pulses, all electrons emit light of the same color," Hemsing says. "This has the potential to produce X-ray pulses that are 10 times sharper and brighter, and stable over time."

Researchers would also gain more control over X-ray . For example, by changing the harmonic in the experiment, scientists could easily tune the color of the X-ray .

Explore further: SLAC scientists create twisted light

More information: E. Hemsing et al. Echo-enabled harmonics up to the 75th order from precisely tailored electron beams, Nature Photonics (2016). DOI: 10.1038/nphoton.2016.101

Related Stories

SLAC scientists create twisted light

September 19, 2013

(Phys.org) —Scientists at SLAC have found a new method to create coherent beams of twisted light – light that spirals around a central axis as it travels. It has the potential to generate twisted light in shorter pulses, ...

Breakthrough in sFLASH seeding experiment

June 3, 2015

A team of researchers from DESY, the University of Hamburg and the Technical University of Dortmund has managed to demonstrate seeding by a procedure known as HGHG at the sFLASH test facility in April. "Seeding" is supposed ...

First movies of droplets getting blown up by x-ray laser

May 24, 2016

Researchers have made the first microscopic movies of liquids getting vaporized by the world's brightest X-ray laser at the Department of Energy's SLAC National Accelerator Laboratory. The new data could lead to better and ...

Creating bright X-ray pulses in the laser lab

November 11, 2014

To create X-rays—short wave radiation—scientists at TU Vienna start out with very long wavelengths—infrared laser. Long wavelength laser pulses rip atoms out of metal and accelerate them, which leads to emission of ...

Recommended for you

ATLAS experiment observes light scattering off light

March 20, 2019

Light-by-light scattering is a very rare phenomenon in which two photons interact, producing another pair of photons. This process was among the earliest predictions of quantum electrodynamics (QED), the quantum theory of ...

How heavy elements come about in the universe

March 19, 2019

Heavy elements are produced during stellar explosion or on the surfaces of neutron stars through the capture of hydrogen nuclei (protons). This occurs at extremely high temperatures, but at relatively low energies. An international ...

Trembling aspen leaves could save future Mars rovers

March 18, 2019

Researchers at the University of Warwick have been inspired by the unique movement of trembling aspen leaves, to devise an energy harvesting mechanism that could power weather sensors in hostile environments and could even ...

Quantum sensing method measures minuscule magnetic fields

March 15, 2019

A new way of measuring atomic-scale magnetic fields with great precision, not only up and down but sideways as well, has been developed by researchers at MIT. The new tool could be useful in applications as diverse as mapping ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.