Scientists look to thermionic energy conversion for clean and efficient power generation

March 1, 2016 by Julie Chao
Scientists look to thermionic energy conversion to provide clean and efficient power generation
Hand-built research converters and thermionic demonstration device heated with a flame to produce power. Credit: GE Research, 1960s

When scientists Daniel Riley and Jared Schwede left Stanford University last year to join Cyclotron Road, a Lawrence Berkeley National Laboratory (Berkeley Lab) program for entrepreneurial researchers, their vision was to take thermionics, an all-but-forgotten technology, and develop it into a clean, compact, and efficient source of power.

Little did they know that soon after arriving, a collaboration with a Berkeley Lab scientist would allow their research to take a big shortcut, providing them with unprecedented insight into the inner workings of thermionic devices.

"It turns out, by almost fortuitous coincidence, that a microscope we have is supremely sensitive to a material property these guys were after," said Andreas Schmid, a scientist with Berkeley Lab's Materials Sciences Division. "Once we had that conversation, it dawned on us, this is a match made in heaven."

Riley and Schwede's thermionics collaboration was recently awarded $3.8 million from the Department of Energy's Advance Research Projects Agency–Energy (ARPA-E), which they will share with Schmid at Berkeley Lab, as well as with collaborators from Stanford, UC Berkeley, and the University of Pennsylvania. Their goal is to develop an entirely new type of generator that can produce clean power from any fuel source at high efficiency, all in a quiet and scalable package.

"It's very difficult to produce electricity in the same place you're consuming it," Riley said. "This is a huge problem in countries where they don't have an electric grid in place. Our long-term vision is to give people an opportunity to generate power in places where they don't have a massive infrastructure."

Dan Riley, Jared Schwede, and Andreas Schmid will use a spin-polarized low-energy electron microscope (SPLEEM) to help develop a thermionic energy converter. Credit: Roy Kaltschmidt/Berkeley Lab

Thermionics is a method for converting heat to electricity that was developed in the 1960s and 1970s, primarily for use in the space-nuclear program. In a thermionic device, electrons evaporate from a hot cathode into a vacuum and are collected by a cooler anode, generating current.

"Thermionics got a lot of interest as part of the space program because of its high efficiency and power density," Schwede said. "But the program was shut down in 1973, and thermionics never really found its feet. It's either been forgotten or has had a reputation of an old technology that's been tried before."

Now the idea is to revitalize the technology by applying tools of modern-day science, including twenty-first-century materials and microfabrication methods. This is where Schmid and his spin-polarized low-energy electron microscope (SPLEEM) come in. SPLEEM is housed at the National Center for Electron Microscopy, part of Berkeley Lab's Molecular Foundry, a Department of Energy Office of Science User Facility.

"This microscope was made to visualize surface magnetism, which is a subtle property, and many other microscopes don't see it that well," said Schmid, a physicist who studies magnetism. "Jared and Dan want to detect a completely different subtle surface property, called the work function. I sort of knew this microscope was sensitive to it, but what I didn't know—and was a very big surprise to me—was that you can use this work function property to make a novel electrical generator."

The work function is basically a measure of how tightly a material clings to its electrons. "In thermionics you take two materials that have very different work functions, put plates next to each other, make one plate hotter than the other, and magically, electricity comes out," Schmid said. "When they explained this to me and showed me the efficiency can be as high as 30 percent or more, which is comparable to the best thermal-to-electricity conversion methods that exist, this was a huge surprise for me."

Riley and Schwede, who were introduced to Schmid soon after coming to Berkeley Lab as part of Cyclotron Road, were equally excited to collaborate with Schmid.

"His microscope was built for exactly what we wanted to do," Schwede said. "Historically studying thermionics was like a black box. You would have current voltage characteristics, and based on the shape of those curves, you would have to reason about complicated interrelated parameters. This basically allows us to crack open that black box and study precisely what's going on and compare that to our device results."

The ARPA-E award will allow the team to develop compelling prototypes. Riley and Schwede have founded a startup company, Spark Thermionics, to pursue their portion of the project and drive its commercialization. Ultimately they envision a small device that can fit on a desk and easily scale depending on the application. "Just like solar cells, where you can string many of them together to make a module," Schwede said, "we believe that our thermionic devices can scale in modules from watts to megawatts."

In addition to being useful in developing countries, their thermionic power generator could be used in a combined heat and power (CHP) system for a single home. "When you heat water in your home, you're actually taking a 2,000-plus degree flame—a natural gas flame can be that hot—and all you're doing is heating water to 80 degrees Celsius. From the thermodynamic perspective, all of that is going to waste," Riley said. "Our thermionic device can generate electricity in the home and use the waste heat to warm it, increasing the overall efficiency and dramatically reducing carbon emissions at the same time."

Added Schmid: "These guys have something that will be a revolution in how we make electricity."

Explore further: Materials scientists make solar energy chip 100 times more efficient

Related Stories

New highly efficient thermoelectronic generator

December 3, 2013

Through a process known as thermionic conversion, heat energy—such as light from the sun or heat from burned fossil fuels—can be converted into electricity with very high efficiency. Because of its promise, researchers ...

Engineers use rust to build a solar-powered battery

February 26, 2016

The recent crash in oil prices notwithstanding, an economy based on fossil fuels seems unsustainable. Supplies of oil, coal and similar fuels are finite, and even if new sources are found, global warming must be considered. ...

Recommended for you

Wireless power could enable ingestible electronics

April 27, 2017

Researchers at MIT, Brigham and Women's Hospital, and the Charles Stark Draper Laboratory have devised a way to wirelessly power small electronic devices that can linger in the digestive tract indefinitely after being swallowed. ...

New design tool to enable global roaming smart phones

April 26, 2017

Wireless communications is a technology that is used every day. Across society, there is a move away from using the internet on desktop computers and towards smartphones, tablets and laptops. Engineers at the University of ...

6 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

antialias_physorg
4.1 / 5 (9) Mar 01, 2016
"It's very difficult to produce electricity in the same place you're consuming it," Riley said. "This is a huge problem in countries where they don't have an electric grid in place. Our long-term vision is to give people an opportunity to generate power in places where they don't have a massive infrastructure."

Why do I get the funny feeling that this is not why this is being resaerched by ARPA-E (i.e. a branch of DARPA)?
ab3a
5 / 5 (5) Mar 01, 2016
Why do I get the funny feeling that this is not why this is being resaerched by ARPA-E (i.e. a branch of DARPA)?


The internet you are using to view this web site was a creation of DARPA too. So are many things you use every day. Yes, ARPA has their reasons for doing this research. That said, there is no reason why you or I couldn't also use these discoveries to our benefit.
antialias_physorg
4.4 / 5 (8) Mar 01, 2016
The internet you are using to view this web site was a creation of DARPA too.

Yep. And the reason they built it was to have a redundant communication structure in case of nuclear war...not so I could type stuff on comment sections.

I'm not saying that what they are doing in the article might not be used for what they are saying. I'm just saying that whoever believes that this rather blatant spin-doctoring is the real aim (and none other) is kidding himself.

This is just one in a long row of DARPA projects for creating electricity on the battlefield from any available source. .
dirk_bruere
5 / 5 (1) Mar 02, 2016
Thermionic generators - currently flying beyond Pluto. Nothing new here...
gculpex
not rated yet Mar 02, 2016
Thermionic generators - currently flying beyond Pluto. Nothing new here...


except the amount of money they get...
gkam
1 / 5 (3) Mar 02, 2016
Let's start replacing our present technologies. Here is Indian Point upwind from New York City.

"According to the Huffington Post's report, for more than a decade, the Indian Point plant has been unable to prevent its highly radioactive reactor and spent fuel pool coolant from leaking into groundwater routes that eventually lead into the Hudson River. Entergy, the operator of the plant, seems to zero in solely on tritium, a radioactive form of water and contaminant that leaks from the plant's cooling system. The most recent leak, however, according to an assessment by the New York Department of State as part of its Coastal Zone Management Assessment, contains a variety of radioactive elements such as strontium-90, cesium-137, cobalt-60, and nickel-63 in addition to tritium."

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.