Fluorescent biosensors light up high-throughput metabolic engineering

February 17, 2016
Biotechnologists engineer microorganisms to produce commodities by iterating the design-build-test cycle until, via continuously improving intermediates, the highest producers are found. While the design and build capacities of the cycle are already almost unlimited, the addition of genetically encoded biosensors that can identify superior producers also endows the test phase of the cycle with high-throughput potential and enables scientists to evaluate billions of designs in a day. Credit: Wyss Institute at Harvard University.

Synthetic biologists are learning to turn microbes and unicellular organisms into highly productive factories by re-engineering their metabolism to produce valued commodities such as fine chemicals, therapeutics and biofuels. To speed up identification of the most efficient producers, researchers at Harvard's Wyss Institute for Biologically Inspired Engineering describe new approaches to this process and demonstrate how genetically encoded fluorescent biosensors can enable the generation and testing of billions of individual variants of a metabolic pathway in record time. The discussion and findings are reported in Trends in Biotechnology and the Proceedings of the National Academy of Sciences (PNAS).

Biotechnologists that tinker with the metabolism of microorganisms to produce valued products look at the engineering process through the lens of the so-called 'design-build-test cycle.' The idea is that multiple iterations of this cycle ultimately allow the identification of combinations of genetic and metabolic elements that produce the highest levels of a desired drug or chemical. Key to the cycle's efficiency, however, is the ability to construct and test the largest number of variants possible; in the end, only a few of these variants will produce the product in industrially attractive amounts.

In the Trends in Biotechnology article, Wyss Institute scientists George Church and Jameson Rogers lay out the current state-of-the-art for designing, building and testing many variants at a time, a methodology that bioengineers call 'multiplexing'. Church is a Wyss Core Faculty member and Professor of Genetics at Harvard Medical School and Rogers, currently with the Boston Consulting Group, performed his work as a Harvard Pierce Fellow and Doctoral Student mentored by Church.

Genetically encoded fluorescent biosensors allow researchers to follow product accumulation in individual bacteria in real time and to filter the best producers out of cultures with billions of bacteria, each carrying a specific design. Credit: Wyss Institute at Harvard University.

Bioengineers thoroughly understand how work on the biochemical level and have a plethora of DNA sequences encoding variants of all of the necessary enzymes at their disposal. Deploying these sequences with the help of computational tools and regulating their expression with an ever-growing number of genetic elements, gives them access to an almost infinite pool of design possibilities. Similarly, revolutionary advances in technologies enabling DNA synthesis and manipulation have made the construction of billions of microorganisms, each containing a distinct design variant, a routine process.

"The real bottleneck in achieving high-throughput engineering cycles lies in the testing step. Current technology limits the number of designs scientists can evaluate to hundreds, or maybe even a thousand, different designs per day. Often the assays necessary are painstaking and prone to user error," said Rogers.

Church and Rogers discuss how genetically encoded biosensors can help bioengineers overcome this hurdle. Such biosensors work by coupling the amount of a desired product produced within a microorganism to the expression of an antibiotic resistance gene such that only high producers survive. Alternatively, the expression of a fluorescent protein can be used for high-speed sorting of rare but highly productive candidates from large populations of less productive microbes.

"Now, by having developed both types of genetically encoded biosensors we can close the loop of a fully multiplexed engineering cycle. This enables exploration of design spaces for specific metabolic pathways in much greater breadth and depth. Fluorescent biosensors, in particular, enable a brand new type of pipeline engineering in which we can observe metabolic product levels at all times during the process with extraordinary sensitivity and ability to further manipulate the engineering cycle," said Church.

Earlier work by Church's team at the Wyss Institute already demonstrated that the levels of commercially valuable chemicals produced by bacteria could be raised through several rounds of a design-build-test cycle that employed an antibiotic selection-based biosensor. Now, Church and Rogers report in PNAS the unique advantages that fluorescent biosensors provide to bioengineers.

"Our fluorescent biosensors are built around specialized proteins that directly sense commercially valuable metabolites. These sensor proteins switch on the expression of a fluorescent reporter protein, resulting in cellular brightness that is proportional to the amount of chemical produced within the engineered cells. We can literally watch the biological production of valuable chemicals in real-time as the synthesis occurs and isolate the highest producers out of cultures with billions of candidates," said Rogers, who was named one of Forbes' "30 Under 30" in Science for opening new perspectives in bioengineering.

Using this strategy, the Wyss researchers have established fluorescent biosensors for the production of super-absorbent polymers and plastics like the coveted acrylate from which a range of products is made. In fact, the study established the first engineered pathway able to biologically produce acrylate from common sugar, rather than the previously required petroleum compounds.

"This newly emerging biosensor technology has the potential to transform metabolic engineering in areas ranging from industrial manufacturing to medicine, and it can have a positive impact on our environment by making the production of drugs and chemicals independent from fossil fuels," said Wyss Institute Founding Director Donald Ingber, M.D., Ph.D., who is the Judah Folkman Professor of Vascular Biology at HMS and the Vascular Biology Program at Boston Children's Hospital, as well as Professor of Bioengineering at the Harvard John A. Paulson School of Engineering and Applied Sciences.

Explore further: New strategy results in custom 'designer proteins' for sensing a variety of molecules

More information: Jameson K. Rogers et al. Genetically encoded sensors enable real-time observation of metabolite production, Proceedings of the National Academy of Sciences (2016). DOI: 10.1073/pnas.1600375113

Related Stories

New biosensors for managing microbial 'workers'

August 4, 2015

Super productive factories of the future could employ fleets of genetically engineered bacterial cells, such as common E. coli, to produce valuable chemical commodities in an environmentally friendly way. By leveraging their ...

Sensing the future of molecule detection and bioproduction

January 28, 2016

Synthetically engineered biosensors, which can be designed to detect and signal the presence of specific small molecule compounds, have already unlocked many potential applications by harnessing bacterial cells such as E. ...

Bacteria 'factories' churn out valuable chemicals

December 30, 2014

A team of researchers led by Harvard geneticist George Church at the Wyss Institute for Biologically Inspired Engineering and Harvard Medical School (HMS) has made big strides toward a future in which the predominant chemical ...

Dually noted: New CRISPR-Cas9 strategy edits genes two ways

September 7, 2015

The CRISPR-Cas9 system has been in the limelight mainly as a revolutionary genome engineering tool used to modify specific gene sequences within the vast sea of an organism's DNA. Cas9, a naturally occurring protein in the ...

Breaking cell barriers with retractable protein nanoneedles

February 11, 2016

The ability to control the transfer of molecules through cellular membranes is an important function in synthetic biology; a new study from researchers at Harvard's Wyss Institute for Biologically Inspired Engineering and ...

Recommended for you

New gene catalog of ocean microbiome reveals surprises

August 17, 2017

Microbes dominate the planet, especially the ocean, and help support the entire marine food web. In a recent report published in Nature Microbiology, University of Hawai'i at Mānoa (UHM) oceanography professor Ed DeLong ...

Researchers describe gene that makes large, plump tomatoes

August 17, 2017

Farmers can grow big, juicy tomatoes thanks to a mutation in the Cell Size Regulator gene that occurred during the tomato domestication process. Esther van der Knaap of the University of Georgia, Athens and colleagues describe ...


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.