Chemical vapor deposition enables production of pure, uniform coatings of metals or polymers

June 19, 2015 by David L. Chandler, Massachusetts Institute of Technology
The CVD process begins with tanks containing an initiator material (red) and one or more monomers (purple and blue), which are the building blocks of the desired polymer coating. These are vaporized, either by heating them or reducing the pressure, and are then introduced into a vacuum chamber containing the material to be coated. The initiator helps to speed up the process in which the monomers link up in chains to form polymers on the surface of the substrate material.

In a sense, says MIT chemical engineering professor Karen Gleason, you can trace the technology of chemical vapor deposition, or CVD, all the way back to prehistory: "When the cavemen lit a lamp and soot was deposited on the wall of a cave," she says, that was a rudimentary form of CVD.

Today, CVD is a basic tool of manufacturing—used in everything from sunglasses to potato-chip bags—and is fundamental to the production of much of today's electronics. It is also a technique subject to constant refining and expansion, pushing materials research in new directions—such as the production of large-scale sheets of graphene, or the development of solar cells that could be "printed" onto a sheet of paper or plastic.

In that latter area, Gleason, who also serves as MIT's associate provost, has been a pioneer. She developed what had traditionally been a high-temperature process used to deposit metals under industrial conditions into a low-temperature process that could be used for more delicate materials, such as . That development, a refinement of a method invented in the 1950s by Union Carbide to produce protective polymer coatings, is what enabled, for example, the printable that Gleason and others have developed.

This of polymers has opened the door to a variety of materials that would be difficult, and in some cases impossible, to produce in any other way. For example, many useful polymers, such as water-shedding materials to protect industrial components or biological implants, are made from precursors that are not soluble, and thus could not be produced using conventional solution-based methods. In addition, says Gleason, the Alexander and I. Michael Kasser Professor at MIT, the CVD process itself induces chemical reactions between coatings and substrates that can strongly bond the material to the surface.

Gleason's work on polymer-based CVD began in the 1990s, when she did experiments with Teflon, a compound of chlorine and fluorine. That work led to a now-burgeoning field detailed in a new book Gleason edited, titled "CVD Polymers: Fabrication of Organic Surfaces and Devices" (Wiley, 2015).

At the time, the thinking was that the only way to make CVD work with polymer materials was by using plasma—an electrically charged gas—to initiate the reaction. Gleason tried to carry out experiments to prove this, beginning by running a control experiment without the plasma in order to demonstrate how important it was for making the process work. Instead, her control experiment worked just fine with no plasma at all, proving that for many polymers this step was not necessary.

But the equipment Gleason used allowed the temperature of the gas to be controlled separately from that of the substrate; having the substrate cooler turned out to be key. She went on to demonstrate the plasma-free process with more than 70 different polymers, opening up a whole new field of research.

The process can require a lot of fine-tuning, but is fundamentally a simple set of steps: The material to be coated is placed inside a vacuum chamber—which dictates the maximum size of objects that can be coated. Then, the coating material is heated, or the pressure around it is reduced until the material vaporizes, either inside the vacuum chamber or in an adjacent area from which the vapor can be introduced. There, the suspended material begins to settle onto the substrate material and form a uniform coating. Adjusting the temperature and duration of the process makes it possible to control the thickness of the coating.

With metals or metal compounds, such as those used in the semiconductor industry, or the silvery coatings inside snack bags, the heated metal vapor deposits on a cooler substrate. In the polymer process, it's a bit more complex: Two or more different precursor compounds, called monomers, are introduced into the chamber, where they react to form polymers as they deposit on the surface.

Even high-temperature CVD processing has evolved, with great potential for commercial applications. For example, the research group of John Hart, an associate professor of mechanical engineering, has built a roll-to-roll processing system using CVD to make sheets of graphene, a material with potential applications ranging from large-screen displays to water-filtration systems. Hart's group and others have used CVD to produce large arrays of carbon nanotubes, materials with potential as new electrodes for batteries or fuel cells.

"It's a very versatile and widely used manufacturing process," Hart says, "and a very general process that can be tailored to many different applications."

One great advantage of CVD processing is that it can create coatings of uniform thickness even over complex shapes. For example, CVD can be used to uniformly coat carbon nanotubes—tiny cylinders of pure carbon that are far more slender than a hair—such as to modify their mechanical properties and make them react chemically to certain substances.

"By combining two CVD processes—one to grow the carbon nanotubes, and another to coat the nanotubes—we have a scalable way to manufacture nanomaterials with new properties," Hart says.

Much progress in CVD research in recent years traces back to Gleason's unexpected discovery, back in the 1990s, that the process could work without plasma—and her follow-up on that finding. "You need to pay attention when a new thing happens," she says. "That's sort of the key."

Explore further: How to make continuous rolls of graphene

Related Stories

How to make continuous rolls of graphene

May 21, 2015

Graphene is a material with a host of potential applications, including in flexible light sources, solar panels that could be integrated into windows, and membranes to desalinate and purify water. But all these possible uses ...

A new way to make sheets of graphene

May 23, 2014

Graphene's promise as a material for new kinds of electronic devices, among other uses, has led researchers around the world to study the material in search of new applications. But one of the biggest limitations to wider ...

Making dreams come true: Making graphene from plastic?

July 2, 2014

Graphene is gaining heated attention, dubbed a "wonder material" with great conductivity, flexibility and durability. However, graphene is hard to come by due to the fact that its manufacturing process is complicated and ...

A new way to make microstructured surfaces

July 30, 2014

A team of researchers has created a new way of manufacturing microstructured surfaces that have novel three-dimensional textures. These surfaces, made by self-assembly of carbon nanotubes, could exhibit a variety of useful ...

Recommended for you

New technology for diagnosing immunity to Ebola

January 15, 2018

A promising new approach to detect immunity to Ebola virus infection has been developed by researchers from i-sense in a collaboration between UCL and Imperial College London.

1 comment

Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Jun 19, 2015
How is this news again? I had the idea years ago, and I don't even do material sciences work on this level.

Here is the next step; vapor deposition in electromagnetic fields and modified gravity (like 0G or 10G)

Then its about layering and organizing on things like graphene.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.