Engineering a better solar cell: Study pinpoints defects in popular perovskites

April 30, 2015 by Renee Gastineau, University of Washington
The quality of the perovskite materials for electronic device applications improved after chemical treatment, remediating the "dark" areas. Credit: University of Washington

One of the fastest-growing areas of solar energy research is with materials called perovskites. These promising light harvesters could revolutionize the solar and electronics industries because they show potential to convert sunlight into electricity more efficiently and less expensively than today's silicon-based semiconductors.

These superefficient crystal structures have taken the scientific community by storm in the past few years because they can be processed very inexpensively and can be used in applications ranging from solar cells to light-emitting diodes (LEDs) found in phones and computer monitors.

A new study published online April 30 in the journal Science by University of Washington and University of Oxford researchers demonstrates that perovskite , generally believed to be uniform in composition, actually contain flaws that can be engineered to improve solar devices even further.

"Perovskites are the fastest-growing class of photovoltaic material over the past four years," said lead author Dane deQuilettes, a UW doctoral student working with David Ginger, professor of chemistry and associate director of the UW's Clean Energy Institute.

"In that short amount of time, the ability of these materials to convert sunlight directly into electricity is approaching that of today's , rivaling technology that took 50 years to develop," deQuilettes said. "But we also suspect there is room for improvement."

The research team used high-powered imaging techniques to find defects in the perovskite films that limit the movement of charges and, therefore, limit the efficiency of the devices. Perovskite solar cells have so far have achieved efficiencies of roughly 20 percent, compared to about 25 percent for silicon-based .

UW researchers used microscopy to identify inefficient regions in perovskite materials used in solar cells, as evidenced by dark areas in C. Credit: University of Washington

In a collaboration made possible by the Clean Energy Institute, the team used a technique called confocal optical microscopy, which is more often used in biology, and applied it to semiconductor technology. They used fluorescent images and correlated them with electron microscopy images to find "dark" or poorly performing regions of the perovskite material at intersections of the crystals. In addition, they discovered that they could "turn on" some of the dark areas by using a simple chemical treatment.

The images offered several surprises but also will lead to accelerated improvements in the materials' uniformity, stability and efficiency, according to corresponding author Ginger, the Alvin L. and Verla R. Kwiram Endowed Professor of Chemistry and Washington Research Foundation Distinguished Scholar.

"Surprisingly, this result shows that even what are being called good, or highly-efficient perovskite films today still are 'bad' compared to what they could be. This provides a clear target for future researchers seeking to improve and grow the materials," Ginger said.

UW Clean Energy Institute researchers discuss a fluorescence image of a perovskite material. Credit: University of Washington

The imaging technique developed by the UW team also offers an easy way to identify previously undiscovered flaws in perovskite materials and to pinpoint areas where their composition can be chemically altered to boost performance, Ginger said.

deQuilettes, who spearheaded the project as a Clean Energy Institute graduate fellow, estimates there are more than a thousand laboratories around the world currently researching the semiconducting properties of perovskite materials. Yet there is more work to be done to understand how to consistently make a material that is stable, has uniform brightness and can stand up to moisture without degrading. The UW research offers new ways for people to think strategically about how to improve the materials and how to extend their applications to high performance light-emitting devices such as LEDs and lasers.

"There are so many of us focusing on perovskites, so hopefully this technique will offer some new direction and steer us toward the places we can look to optimize their energy-capturing and emitting potential," deQuilettes said.

Explore further: Team develops new technique for growing high-efficiency perovskite solar cells

More information: Impact of microstructure on local carrier lifetime in perovskite solar cells, www.sciencemag.org/lookup/doi/ … 1126/science.aaa5333

Related Stories

Solar cells get growth boost

March 4, 2015

Researchers at the Okinawa Institute of Science and Technology Graduate University's (OIST) Energy Materials and Surface Sciences Unit have found that growing a type of film used to manufacture solar cells in ambient air ...

Uncovering the secrets of super solar power perovskites

March 16, 2015

The best hope for cheap, super-efficient solar power is a remarkable family of crystalline materials called hybrid perovskites. In just five years of development, hybrid perovskite solar cells have attained power conversion ...

Recommended for you

New synthesis method for producing fluorinated piperidines

January 22, 2019

Synthetic molecules are essential for many products, including medicines, crop protection agents and special materials such as Teflon. These molecules have several components, which can be combined in a variety of ways, resulting ...

Scientists discover new 'architecture' in corn

January 21, 2019

New research on the U.S.'s most economically important agricultural plant—corn—has revealed a different internal structure of the plant than previously thought, which can help optimize how corn is converted into ethanol.

Targeting 'hidden pocket' for treatment of stroke and seizure

January 19, 2019

The ideal drug is one that only affects the exact cells and neurons it is designed to treat, without unwanted side effects. This concept is especially important when treating the delicate and complex human brain. Now, scientists ...

Artificially produced cells communicate with each other

January 18, 2019

Friedrich Simmel and Aurore Dupin, researchers at the Technical University of Munich (TUM), have for the first time created artificial cell assemblies that can communicate with each other. The cells, separated by fatty membranes, ...

2 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

24volts
not rated yet Apr 30, 2015
I see a lot of articles on this type of cell but I can't find anyone that's actually selling any. Does anyone know of any company that has them for sale and not just working on them?
RealScience
not rated yet Apr 30, 2015
@24V - I don't think anyone is selling them yet - their lifetimes are still not good enough (very moisture sensitive).

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.