Researchers create artificial methane hydrates and open an innovative pathway for the use of new fuels
The Laboratory of Advanced Materials at the University of Alicante's Department of Inorganic Chemistry has developed a technology that allows the preparation of artificial methane hydrates. The research has been published by Nature Communications.
Research was led by Joaquín Silvestre Albero, Francisco Rodríguez Reinoso and Manuel Martínez Escandell, and carried out by Mirian E. Casco, who is currently completing an internship at the University of Alicante. These researchers have proven it is possible to prepare methane hydrates in a laboratory by imitating, and even enhancing, natural processes through the use of activated carbon materials as nano-reactors. One of the keys of this research was reducing the process to form methane hydrates, to just a few minutes, which takes a long time in nature, increasing its technological applicability.
The University of Alicante has been working on the design and synthesis of highly-performing activated carbon for over 30 years. In the words of Joaquín Silvestre, head researcher, "these materials show great potential to not only eliminate polluting molecules in the air and in industrial waterways, but also to be used as gas storage systems".
These results are a step toward understanding the artificial synthesis process of these natural structures, and a new pathway to the use of fuels such as natural gas for transport instead of petrol and diesel, or for long-distance transport of natural gas (e.g. as opposed to current transport conditions, in which gas is liquefied at -162ºC. This new technique allows for gas to be transported at a temperature that is much closer to room temperature). "Our results show that some of our coals can supply amounts as high as 300 methane volumes stored at 100 atmospheres for each volume unit of wet coal," researchers say.
Silvestre explains that this research has taken advantage of the so-called "confinement" effect to artificially synthesize methane hydrates inside the coal's cavities or pores. "Methane hydrates have been prepared on activated carbon materials that were previously wetted under gentler pressure and temperature conditions (30 atmospheres and 2ºC) than in a natural environment".
Once the synthesis and analysis was carried out at the University of Alicante's laboratories, the study went on to its final stage in Rutherford Appleton Laboratory in Oxford (United Kingdom), where neutron scattering was performed, and in ALBA synchrotron in Barcelona (Spain). "These studies are the first experimental evidence that it is possible to form methane hydrates in a confined space, with a nature-like stoichiometry and significantly higher kinetics."
Gas hydrates (also known as clathrates) are crystalline structures similar to cages, in which a group of molecules surrounds a central molecule of a certain nature. When this cage is made up of water molecules and there is a methane molecule inside the cavity, methane hydrates are formed. Methane hydrates occur in nature under very specific physical, chemical and geological conditions that can only be found in the bottom of the ocean, or, less frequently, in the subsoil of cold regions such as Siberia, which is known as permafrost.
The origin of the source methane is in the thermal, microbial and bacterial decomposition of organic matter that is dragged by river currents for millions of years. As a consequence, methane hydrate reserves are located in continental slopes, near the shore, approximately 300-500 meters underground, where enough organic matter is accumulated under the right combination of pressure and temperature. Methane hydrates are the Earth's largest natural gas reserve. They are located near the continental area, and according to calculations, their reserves are double those of all fossil fuels (oil, natural gas and coal) that currently exist on Earth. According to experts, there are 5,000 gigatons of methane, which is approximately 500 times the amount of carbon that is emitted every year from burning coal, oil and natural gas. In 2013, the first exploration to extract methane by de pressurising marine deposits was carried out in Japan. This technology is expected to be available in 2018.
The hydrate's formula is (CH4)4(H2O)23, or one mol of methane per 5.75 mols of water, corresponding to 13.4% of methane weight (one cubic metre of hydrate releases 180 cubic metres of methane, the main component of natural gas). The hydrates' high energy density and their stability when temperatures are higher than liquid natural gas (-2ºC vs -162ºC) mean that methane hydrates can be a future solution for long-distance transport of methane in large quantities, as long as they can be synthetically prepared by imitating nature within a reasonably short period of time (in just a few minutes)