Organic electronics could lead to cheap, wearable medical sensors

December 10, 2014 by Sarah Yang, University of California - Berkeley

Organic electronics could lead to cheap, wearable medical sensors
UC Berkeley engineers have created a pulse oximeter sensor composed of all-organic optoelectronics that uses red and green light. The red and green organic light-emitting diodes (OLED) are detected by the organic photodiode (OPD). The device measures arterial oxygen saturation and heart rate as accurately as conventional, silicon-based pulse oximeters. Credit: Yasser Khan
(Phys.org) —Future fitness trackers could soon add blood-oxygen levels to the list of vital signs measured with new technology developed by engineers at the University of California, Berkeley.

"There are various pulse oximeters already on the market that measure and blood-oxygen saturation levels, but those devices use rigid conventional electronics, and they are usually fixed to the fingers or earlobe," said Ana Arias, an associate professor of electrical engineering and computer sciences and head of the UC Berkeley team that is developing a new organic optoelectronic sensor.

By switching from silicon to an organic, or carbon-based, design, the researchers were able to create a device that could ultimately be thin, cheap and flexible enough to be slapped on like a Band-Aid during that jog around the track or hike up the hill.

The engineers put the new prototype up against a conventional pulse oximeter and found that the pulse and oxygen readings were just as accurate.

The research team reported its findings today (Wednesday, Dec. 10) in the journal Nature Communications.

Giving silicon a run for its money

A conventional pulse oximeter typically uses light-emitting diodes (LEDs) to send red and through a fingertip or earlobe. Sensors detect how much light makes it through to the other side. Bright, oxygen-rich blood absorbs more red light, while the darker hues of oxygen-poor blood absorb more infrared light. The ratio of the two wavelengths reveals how much oxygen is in the blood.

For the organic sensors, Arias and her team of graduate students – Claire Lochner, Yasser Khan and Adrien Pierre – used red and green light, which yield comparable differences to red and infrared when it comes to distinguishing high and low levels of oxygen in the blood.

Using a solution-based processing system, the researchers deposited the green and red organic LEDs and the translucent detectors onto a flexible piece of plastic. By detecting the pattern of fresh arterial blood flow, the device can calculate a .

"We showed that if you take measurements with different wavelengths, it works, and if you use unconventional semiconductors, it works," said Arias. "Because are flexible, they can easily conform to the body."

Arias added that because the components of conventional oximeters are relatively expensive, healthcare providers will choose to disinfect them if they become contaminated. In contrast, "organic electronics are cheap enough that they are disposable like a Band-Aid after use," she said.

Explore further: Health checks will be seated by Sharp

Related Stories

Health checks will be seated by Sharp

December 8, 2014

(Phys.org) —Sharp unveiled a news-making prototype of a sensor earlier this month at Semicon Japan 2014, which took place from Dec 3 to 5. As its title suggests, Sharp's "Blood Vessel Aging Degree Sensor" can measure the ...

Scientists discover new hemoglobin type

March 17, 2008

Scientists at the University of Bonn have discovered a new rare type of haemo-globin. Haemoglobin transports oxygen in the red blood corpuscles. When bound to oxygen it changes colour. The new haemoglobin type appears optically ...

Banked blood grows stiffer with age, study finds

September 5, 2014

It may look like fresh blood and flow like fresh blood, but the longer blood is stored, the less it can carry oxygen into the tiny microcapillaries of the body, says a new study from University of Illinois researchers.

Recommended for you

Semimetals are high conductors

March 18, 2019

Researchers in China and at UC Davis have measured high conductivity in very thin layers of niobium arsenide, a type of material called a Weyl semimetal. The material has about three times the conductivity of copper at room ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.