Reining in chaos in particle colliders yields big results

June 30, 2014
A method to correct tiny defects in the LHC's superconducting magnets (example shown above) was crucial to the discovery of the Higgs boson, which was announced in 2012. Credit: CERN

When beams with trillions of particles go zipping around at near light speed, there's bound to be some chaos. Limiting that chaos in particle colliders is crucial for the groundbreaking results such experiments are designed to deliver.

In a special focus issue of the journal Chaos, from AIP Publishing, a physicist at the European Organization for Nuclear Research (CERN) details an important method of detecting and correcting unwanted chaotic behavior in particle colliders. The method is helping accelerator physicists design high-performing, cost-efficient accelerators in an era of constrained science budgets.

The aim of the focus issue is to review, comprehensively, the theory and implementation of existing methods of chaos detection and predictability—as well as to report recent applications of these techniques to different scientific fields. The Focus Issue: Chaos Detection Methods and Predictability is collection of 12 papers representing the wide range of applications, spanning mathematics, physics, astronomy, particle accelerator physics, meteorology and medical research.

Chaos has long bedeviled physicists trying to describe the precise motions of interacting objects. The French mathematician Henri Poincaré discovered the essence of the phenomenon in the late 1800s when he attempted (unsuccessfully) to predict precisely the motions of the solar system's planets. The same chaotic behavior appears in the crowds of particles traveling inside accelerators like CERN's Large Hadron Collider.

In these machines, powerful electric and magnetic fields accelerate and guide beams containing trillions of particles. Ideally all particles would travel in orderly orbits around the rings into which they are injected. But in reality, some of the particles spread out around the ring's center, where they can become chaotic due to their mutual interactions and to defects in the magnetic fields that guide them. Particles that get kicked out of stable orbit can then crash into the collider's ultra-cold superconducting magnets. If this happens too often, the magnets heat up and the have to stop, which compromises experiments and creates costly delays.

From previous work in astronomy, Yannis Papaphilippou, a physicist at CERN, knew of a method called "frequency map analysis" that relates the frequencies at which objects oscillate to their . Over the course of more than a decade, Papaphilippou and his colleagues applied the method to visualize those same frequencies in simulations of particle beams in accelerators. Using such simulations, physicists can design colliders to avoid chaotic beam interactions and keep on track.

The method has already born fruit. By modeling the extent to which tiny defects in the LHC's superconducting magnets cause protons traveling in the collider's rings to behave chaotically, Papaphilippou and his colleagues helped magnet builders design and produce these magnets within strict tolerance limits. The researchers also showed that only half as many correcting magnets were needed as was originally thought.

These findings substantially reduced the collider's cost and, along with many other efforts, helped streamline the search for the Higgs boson, Papaphilippou said. "All the big discoveries that we've had in the LHC…would have been hampered if there was not a very detailed design and evaluation of the nonlinear effects and their correction." Frequency map analysis has also helped scientists optimize the Spallation Neutron Source in Oak Ridge, Tenn. As a result of this optimization, the machine set a world record last year for power delivery.

As physicists design new accelerators, Papaphilippou predicts they will use frequency map analysis to achieve high performance at reasonable cost. The Particle Physics Project Prioritization Panel (P5), which advises the U.S. government, identified cost as a major concern in a recent report on the future of particle physics.

"Studying these [chaotic] effects from scratch can be a very-cost effective way to build and design these ," Papaphilippou said.

Explore further: Famed atom smasher gets twice the energy next year (Update)

More information: "Detecting chaos in particle accelerators through the frequency map analysis method," by Yannis Papaphilippou, journal Chaos June 30, 2014: scitation.aip.org/content/aip/journal/chaos/24/2/10.1063/1.4884495

Related Stories

CERN announces LHC restart schedule

June 24, 2014

The Large Hadron Collider (LHC), the largest and most powerful particle accelerator in the world, has started to get ready for its second three-year run. Cool down of the vast machine has already begun in preparation for ...

Why bigger accelerators are better in particle physics

February 27, 2014

While the world's largest circular particle accelerator – the Large Hadron Collider (LHC) – will continue operation for the next few years, scientists have already started the conversation to build a much bigger, post-LHC ...

Computer-assisted accelerator design

April 22, 2014

Stephen Brooks uses his own custom software tool to fire electron beams into a virtual model of proposed accelerator designs for eRHIC. The goal: Keep the cost down and be sure the beams will circulate in this proposed next-generation ...

Higgs boson machine-learning challenge

May 20, 2014

Last week, CERN was among several organizations to announce the Higgs boson machine-learning challengeExternal Links icon – your chance to develop machine-learning techniques to improve analysis of Higgs data.

Recommended for you

Flexible ferroelectrics bring two material worlds together

January 17, 2017

Until recently, "flexible ferroelectrics" could have been thought of as the same type of oxymoronic phrase. However, thanks to a new discovery by the U.S. Department of Energy's (DOE) Argonne National Laboratory in collaboration ...

First-ever X-ray image capture of material defect process

January 17, 2017

From blacksmiths forging iron to artisans blowing glass, humans have for centuries been changing the properties of materials to build better tools – from iron horseshoes and swords to glass jars and medicine vials.

Theory lends transparency to how glass breaks

January 16, 2017

Over time, when a metallic glass is put under stress, its atoms will shift, slide and ultimately form bands that leave the material more prone to breaking. Rice University scientists have developed new computational methods ...

A novel way to put flame retardant in a lithium ion battery

January 16, 2017

(Phys.org)—A team of researchers at Stanford University has found a novel way to introduce flame retardant into a lithium ion battery to prevent fires from occurring. In their paper published in the journal Science Advances, ...

Self-assembling particles brighten future of LED lighting

January 16, 2017

Just when lighting aficionados were in a dark place, LEDs came to the rescue. Over the past decade, LED technologies—short for light-emitting diode—have swept the lighting industry by offering features such as durability, ...

1 comment

Adjust slider to filter visible comments by rank

Display comments: newest first

Phlenched
5 / 5 (1) Jun 30, 2014
The phrase you want in the title is "Reining in" which is a figurative reference to pulling in on the reins to slow your horse down. "Reigning in" means being the monarch of a place. Good article, though.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.