Titanium powder used to 3D print automotive parts

December 10, 2013, University of Sheffield
Titanium Powder used to 3D print automotive parts

(Phys.org) —To date, the 3D printing revolution has focused on the use of plastics – cheap printers' feedstock and high throughput. Until now 3D printing with metal has been prohibitively expensive because of the cost of titanium powders which currently sell for $200-$400 per kilogram.

Rotherham based company Metalysis have developed a new way of producing low-lost powder, which heralds a new era in additive layer manufacture, and will see greater use of titanium in components across the automotive, aerospace and defence industries.

The Renishaw 3D printer, which is based at the Mercury Centre within the Department of Materials at the University of Sheffield, made the parts, demonstrating the feasibility of producing using additive layer manufacturing.

The Metalysis process is radically cheaper and environmentally benign compared with existing titanium production methods, such as the energy-intensive and toxic Kroll process. Currently, the manufacture of titanium powder involves taking the metal sponge produced by the Kroll process, which is then processed into ingot billets, melted into bar form and finally atomised into powder – a costly and labour-intensive four-step process.

Metalysis takes rutile and transforms it directly into powdered titanium using electrolysis, which is cost-effective and thus essential to the supply chain; the low-cost titanium powder can be used in a variety of new applications whereas previously the metal has been excessively expensive for use in mass production of lower value items.

3D printing brings further cost benefits by reducing waste because the current means of production is subtractive, as components are shaped out of metal billets, which wastes a huge amount of material. Metalysis' low-cost titanium powder enables additive manufacturing with its metal powder, thereby reducing the quantity of material required.

"Professor Iain Todd, Director of the Mercury Centre explained: "There are significant challenges to overcome in taking emerging technologies like metallic 3D printing from the lab to production, not least of which is material cost. The step-change in terms of process economics that this material breakthrough provides takes us ever closer to the time when 3D Printing of metals such as titanium is considered the norm rather than exceptional."

In a further development, the titanium powder used to manufacture the automotive parts is also a world-first, as Metalysis has created titanium from rutile sand, a naturally occurring titanium ore present in beach sands, in one single step. The use of this inexpensive and plentiful feedstock for titanium manufacture will dramatically reduce the cost of titanium production, allowing its increased use.

University of Sheffield Vice-Chancellor, Professor Sir Keith Burnett, said: "We are delighted that this innovative work is being undertaken in the University of Sheffield's world-leading Faculty of Engineering.

"Most people associate 3D printing with plastic parts, but, with Metalysis' titanium powder, we have for the first time demonstrated its potential in the manufacturing of metal parts. This is potentially a significant breakthrough for the many sectors which can benefit from its low-cost production. We look forward to continuing working with Metalysis as they develop this ground-breaking technology."

In addition to titanium, Metalysis is developing tantalum powder and will use its technology to produce a wide range of specialist metals (including rare earths). Furthermore, innovative alloys can be produced using Metalysis' technology because the process is conducted in the solid state, hence metals with significantly different densities or melting points can be alloyed. Metal powders created by the Metalysis process can be engineered to get particle size and distribution correct for a range of PM applications.

Dion Vaughan, CEO of Metalysis added: "Metalysis' rutile-derived titanium powder is produced at lower cost and is suitable for 3D printing so that manufacturing metal components becomes more economical.

"The Metalysis process could reduce the price of titanium by as much as 75 per cent, making titanium almost as cheap as specialty steels. We believe that titanium made by the Metalysis process could replace the current use of aluminium and steel in many products. This world-first for a titanium 3D printed component brings us a step closer to making this a reality."

Explore further: 3-D printed horseshoe to improve racing performance

Related Stories

Feds fund concept for cheaper, better titanium made in US

October 3, 2013

A Case Western Reserve University proposal for a low-cost, energy-efficient method to extract the strategic metal titanium from ore has been selected by the U.S. Department of Energy's Advanced Research Projects Agency-Energy ...

Amazing future for 3D printing with ESA

October 17, 2013

3D printing is getting ready to revolutionise space travel. ESA is paving the way for 3D-printed metals to build high-quality, intricate shapes with massive cost savings.

Solid Concepts 3D prints world's first metal gun (w/ Video)

November 8, 2013

(Phys.org) —3D printing company Solid Concepts has announced that it has 3D printed the world's first metal gun—other guns printed using 3D printers have been made of plastic. Representatives for Solid Concepts say they ...

Recommended for you

Apple closing iPhone security gap used by law enforcement

June 14, 2018

Apple is closing a security gap that allowed outsiders to pry personal information from locked iPhones without a password, a change that will thwart law enforcement agencies that have been exploiting the vulnerability to ...


Adjust slider to filter visible comments by rank

Display comments: newest first

1 / 5 (2) Dec 10, 2013
Until now 3D printing with metal has been prohibitively expensive because of the cost of titanium powders which currently sell for $200-$400 per kilogram.
That isn't a prohibitive cost at all. However, the 1.5 megabucks for the printer is.
not rated yet Dec 11, 2013
I wonder if Ilmanite (FeTiO2) could also be used as a feed stock ore?
not rated yet Dec 11, 2013
does the 3d printer sinter or what? I could see these powders being better used in an additive cold spray process, like what GE is doing now.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.