Quality control at the point of a finger

February 8, 2013
A point of the finger is all it takes to send the defect in the paint to the QS inspection system, store it and document it. Credit: Fraunhofer IOSB

For production operations, quality assurance over the process chain is indispensible: it is the only way to detect problems at an early stage and lower additional costs. Fraunhofer researchers developed an efficient type of quality control: With a pointing gesture, employees can input any detected defects to car body parts into the inspection system, and document them there. The non-contact gesture-detection process will be on display at the 2013 Hannover Messe from April 8 to 12.

With utter meticulousness, the inspector examines a car bumper for defects in the paint work – ultimately, only impeccable body parts get sent to final assembly. If he finds a defect in the paint, just a point of the finger is all it takes to send the defect to the QS inspection system, store it and document it. The employee obtains visual feedback through a monitor that displays a of the bumper. At first glance, it might seem completely futuristic, though soon enough, it could become an everyday part of quality assurance: Researchers at the Fraunhofer Institute for Optronics, System Technologies and Image Exploitation IOSB in Karlsruhe engineered the intelligent system on behalf of the . In the future, it should supersede today's time-consuming test procedures. "Previously, the inspector had to note all defects that were detected, leave his workstation, go to the PC terminal, operate multiple input screens and then label the position of the defect and the defect type. That approach is laborious, time-intensive and prone to error," asserts Alexander Schick, scientist at IOSB. The gesture control system, by contrast, improves the inspector's working conditions considerably, and triggering substantial time savings – the employee can remain at his workstation and interact directly with the test object. "If the bumper is fine, then he swipes over it from left to right. In the event of damage, he points to the location of the defect," says Schick.

3D tracking records people and objects in real time

This non-contact gesture-detection system is based on 3D data. Hence, the entire workstation must first be reconstructed in 3D. That includes the individual as well as the object with which he is working. "What does the inspector look like? Where is he situated? How does he move? What is he doing? Where is the object? – all of these data are required so that the pointing gesture can properly link to the bumper," explains the researcher. In order to enable gesture control, the experts apply 3D-body tracking, which records the individual's posture in real time. Even the car body parts are "tracked." When it comes to this, the hardware requirements are minimal: A standard PC and two Microsoft Kinect systems – consisting of camera and 3D sensors – suffice in order to realize the reconstruction. Schick and his team developed the corresponding algorithms, which fuse multiple 2D and 3D images together, specifically for this kind of application, and adapted them to the standards of the BMW Group.

"The breeding ground for this technology is our Smart Control Room, where people can interact with the room quite naturally. They can use pointing gestures to operate remote displays – without any additional equipment. The room recognizes what actions are taking place at that moment, and offers the appropriate information and tools. Since gesture detection does not depend on display screens, this means we can implement applications that use no monitors, like the gesture interaction here with real objects," explains Schick. "It makes no difference what kind of object we are dealing with. Instead of a bumper, we could also track a different part."

The technology can be subsequently integrated into existing production systems at little expense. Scientists could incorporate their effective process into the BMW Group's system through a specialized interface module. The gesture detection system will be presented at the 2013 Hannover Messe, from 8 to 12 April, at the Fraunhofer joint exhibition booth in Hall 2, Booth D18.

Plans call for the installation of a prototype model at the BMW plant in Landshut in January 2013. Working in cooperation with quality control inspectors, the system will be fine-tuned onsite before it gets deployed to production in the future.

Explore further: Gesture recognition

Related Stories

Gesture recognition

December 18, 2008

A system that can recognize human gestures could provide a new way for people with physical disabilities to interact with computers. A related system for the able bodied could also be used to make virtual worlds more realistic. ...

The hand as a joystick

May 26, 2011

You need a mouse and a keyboard, a touch-screen or a joystick to control a computer system. In the future, a new gesture command system will make it possible to use just the fingers of a hand.

iPoint 3D - Using fingers as a remote control

February 19, 2009

(PhysOrg.com) -- The 'iPoint 3D' allows people to communicate with a 3-D display through simple gestures - without touching it and without 3-D glasses or a data glove. What until now has only been seen in science fiction ...

Star chef points the way

February 10, 2010

Master chef Johann Lafer is a virtuoso in the kitchen -- and with modern technology too. At his cookery school the TV celebrity adopts a high-tech approach to make things easier in the kitchen with the touchless iPoint-Presenter.

Recommended for you

Enhancing solar power with diatoms

October 20, 2017

Diatoms, a kind of algae that reproduces prodigiously, have been called "the jewels of the sea" for their ability to manipulate light. Now, researchers hope to harness that property to boost solar technology.


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.