Discovery may lead to significantly more efficient method of data storage

April 9, 2012 By Jean Jones
Alexei Gruverman (left) with Haidong Lu, Gruverman's graduate student and the lead author on the paper.

( -- A team led by University of Nebraska-Lincoln physicist Alexei Gruverman in collaboration with researchers in Spain and at the University of Wisconsin has discovered a significantly more efficient method of data storage that offers great promise for the future of technology.

Gruverman’s research on electronic materials is done at the nanoscale, where objects exhibit unexpected chemical and physical properties. Central to his research is the scanning probe microscopy technique which is based on exerting highly localized mechanical, electrical or magnetic influence on an object by using a tiny physical probe and measuring the object's response. The technique works much like a person's sense of touch, Gruverman said.

"If you are in a dark room and want to find out whether the surface of this desk is smooth or rough, solid or soft what do you do?" he said, pointing to his desktop. "You touch it with your finger, press a bit and scan with your finger and feel the response."

Similarly, the tip of the probe -- whose radius measures about 10 nanometers -- can scan a surface and offer researchers feedback. The probe also can be used to electrically change the local properties of ferroelectric materials, which are important electronic materials used in memory devices. The change that occurs is similar to what happens when magnetic materials are remagnetized by a magnetic field. By applying an electric potential to the probe, a nanoscale-size bit of electrical information can be stored in the ferroelectric material. This principle is central to data storage, like in hard disk drives.

To date, researchers have relied on the electrical voltage to store information. However, Gruverman's team found that the same bit could be written simply by pressing harder against the ferroelectric material's surface. In a sense and in this case, the probe's needle works much like a nanoscopic typewriter in its ability to write data in a very specific area on a ferroelectric film and leave data behind without damaging the surface. That finding makes the research team the first to demonstrate that mechanical force can be used to change an area’s polarization.

"It's a completely voltage-free switching of polarization, which is what makes the results of this research unique," Gruverman said.

The finding is groundbreaking because it opens up a new way to store data significantly more densely than has previously been available.

While Gruverman is hesitant to say such a finding could pave the way to a new generation of devices like computers and cell phones, whose production ultimately is at the mercy of many other factors, it does establish the scientific basis that makes it possible, he said.

The team's findings were published April 5 in the journal Science and includes Gruverman's graduate student, Haidong Lu, as a lead author. Other collaborators included a group of Spanish researchers led by Gustau Catalan and the team led by Chang-Beom Eom from the University of Wisconsin.

At the time of their discovery, Gruverman and other UNL researchers were engaged in a separate study supported in part by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering. Related research also receives funding from UNL's Materials Research Science and Engineering Center, which is part of a nationwide network funded by the National Science Foundation that's designed to support interdisciplinary and multidisciplinary research and education of the highest quality while addressing fundamental problems in science and engineering that are important to society.

Gruverman said his team hopes to build on this discovery by investigating other possible applications.

Explore further: Structural consequences of nanolithography

Related Stories

Structural consequences of nanolithography

August 11, 2011

( -- Users from the University of Wisconsin-Madison and the Center for Nanophase Materials Science, working with the X-Ray Microscopy Group, have discovered structural effects accompanying the nanoscale lithography ...

Tunneling Across a Ferroelectric

July 14, 2006

University of Nebraska-Lincoln physicist Evgeny Tsymbal's groundbreaking identification of an emerging research field in electronic devices earned publication this week in Science magazine.

Fundamental discovery could lead to better memory chips

March 15, 2011

( -- Engineering researchers at the University of Michigan have found a way to improve the performance of ferroelectric materials, which have the potential to make memory devices with more storage capacity than ...

Measuring the electrical properties of nano-crystals

October 20, 2010

The UK's National Physical Laboratory (NPL) is working to provide more reliable measurement of the electrical properties of materials used in nanotechnology – which could lead to much more accurate devices in the future.

Small and stable ferroelectric domains

March 28, 2011

Researchers are one step closer to figuring out a way to make nano-sized ferroelectric domains more stable, reports a new study in journal Science.

Recommended for you

The microscopic origin of efficiency droop in LEDs

November 21, 2017

Light-emitting diodes—or LEDs, as they are commonly known—have been slowly replacing incandescent light bulbs in applications ranging from car taillights to indicators on electronics since their invention in the 1960s.

Borophene shines alone as 2-D plasmonic material

November 20, 2017

An atom-thick film of boron could be the first pure two-dimensional material able to emit visible and near-infrared light by activating its plasmons, according to Rice University scientists.


Adjust slider to filter visible comments by rank

Display comments: newest first

5 / 5 (1) Apr 09, 2012
Just as long at it doesn't involve a spinning disc.
The mechanical age is coming to an end in computing.
5 / 5 (1) Apr 09, 2012
Just as long at it doesn't involve a spinning disc.
The mechanical age is coming to an end in computing.

No, it involves a horde of AFM needles mechanically moving along a surface and reading bits.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.