Stanford scientists see the solar future, and it's all about 'nanodomes' and 'plasmonics'

January 31, 2011 by Andrew Myers, Stanford University
Acting like a waffle iron, silicon nanodomes, each about 300 nanometers in diameter and 200 nanometers tall, imprint a honeycomb pattern of nanoscale dimples into a layer of metal within the solar cell.

( -- Stanford engineers have succeeded in harnessing plasmonics -- an emerging branch of science and technology -- to more effectively trap light within thin solar cells. As a result, we're one step closer to thin, inexpensive solar cells.

Researchers in solar energy speak of a day when millions of otherwise fallow square meters of sun-drenched roofs, windows, deserts and even clothing will be integrated with inexpensive solar cells that are many times thinner and lighter than the bulky rooftop panels familiar today.

So, when your iPod is on the nod, you might plug it into your shirt to recharge. Lost in the Serengeti with a sapped cell phone? No problem; rolled in your backpack is a lightweight solar pad. Sailing the seven seas and your GPS needs some juice? Hoist a solar sail and be one with the gods of geosynchronous orbit.

It is not hard to envision a time when such technologies will be ubiquitous in our increasingly energy-hungry lives. That day may come a bit sooner thanks to a multidisciplinary team of Stanford engineers led by Mike McGehee, Yi Cui and Mark Brongersma, and joined by Michael Graetzel at the École Polytechnique Fédérale de Lausanne (EPFL).

Waves of energy

In an article published in Advance Energy Materials, the Stanford/EPFL team announced a new type of thin solar cell that could offer a new direction for the field. They succeeded in harnessing plasmonics – an emerging branch of science and technology – to more effectively trap light within thin solar cells to improve performance and push them one step closer to daily reality.

"Plasmonics makes it much easier to improve the efficiency of solar cells," said McGehee, an associate professor of materials science and engineering at Stanford.

McGehee is the director of CAMP – the Center for Advanced Molecular Photovoltaics – a multidisciplinary, multi-university team tackling the challenges of thin-film solar cells.

"Using plasmonics we can absorb the light in thinner films than ever before," McGehee said. "The thinner the film, the closer the charged particles are to the electrodes. In essence, more electrons can make it to the electrode to become electricity."

Plasmonics is the study of the interaction of light and metal. Under precise circumstances, these interactions create a flow of high-frequency, dense electrical waves rather than electron particles. The electronic pulse travels in extremely fast waves of greater and lesser density, like sound through the air.

A perfect solar waffle

The lightbulb moment for the team came when they imprinted a honeycomb pattern of nanoscale dimples into a layer of metal within the solar cell. Think of it as a nanoscale waffle, only the bumps on the waffle iron are domes rather than cubes – nanodomes to be exact, each only a few billionths of a meter across.

To fashion their waffle, McGehee and team members spread a thin layer of batter on a transparent, electrically conductive base. This batter is mostly titania, a semi-porous metal that is also transparent to light. Next, they use their nano waffle iron to imprint the dimples into the batter. Next, they layer on some butter – a light-sensitive dye – which oozes into the dimples and pores of the waffle. Lastly, the engineers add some syrup – a layer of silver, which hardens almost immediately.

Titania within the solar cell is imprinted by the silicon nanodomes like a waffle imprinted by the iron.

When all those nanodimples fill up, the result is a pattern of nanodomes on the light-ward side of the silver.

This bumpy layer of silver has two primary benefits. First, it acts as a mirror, scattering unabsorbed light back into the dye for another shot at collection. Second, the light interacts with the silver nanodomes to produce plasmonic effects. Those domes of silver are crucial. Reflectors without them will not produce the desired effect. And any old nanodomes won't do either; they must be just the right diameter and height, and spaced just so, to fully optimize the plasmonics.

If you imagine your nanoself observing one of these solar cells in slow motion, you would see photons enter and pass through the transparent base and the titania (the waffle), at which point some photons would be absorbed by the light-sensitive dye (the butter), creating an electric current. Most of the remaining photons would hit the silver back reflector (the hardened syrup) and bounce back into the solar cell. A certain portion of the photons that reach the silver, however, will strike the nanodomes and cause plasmonic waves to course outward. And there you have it – the first-ever plasmonic dye-sensitized solar cell.

Trapping the light fantastic

It is easy to see why researchers are focused on thin-film solar technology. In recent years, much hope has been directed toward these lightweight, flexible cells that use photosensitive dyes to generate electricity. These cells have many advantages: They are less energy intensive and less costly to produce, flowing like newsprint off huge roll presses. They are thinner even than other "thin" solar cells. They are also printable on flexible bases that can be rolled up and taken virtually anywhere. Many use non-toxic, abundantly available materials, as well – a huge plus in the push for sustainability.

Dye-sensitized solar cells are not without challenges, however. First off, the very best convert only a small percentage of light into electricity – about 8 percent. The bulkier commercial technologies available today have reached 25 percent efficiency, and certain advanced applications have topped 40 percent. And then there is durability. The latest thin solar cell will last about seven years under continuous exposure to the elements. Not bad until you consider that 20 to 30 years is the commercial standard.

Both efficiency and reliability will have to improve. Nonetheless, engineers like McGehee believe that if they can convert just 15 percent of the light into electricity – a figure that is not out of reach – and tease the lifespan to a decade, we might soon find ourselves in the age of personal solar cells. An advance like just might provide the spark necessary to take the field down a new and exciting path.

A matter of economics

Cheaper and cleaner will be the keys. Coal-based power is plentiful and cheap, but also comes at a steep environmental cost in gouged landscapes and polluted skies. At today's commercial rates, however, even the best solar alternatives cost five times more per kilowatt-hour than coal. It is clear that economics, and not technology, is what stands between us and our solar future.

But McGehee and others are confident they can make thin more attractive.

Explore further: Hot Electrons Could Double Solar Cell Power Efficiency

Related Stories

Hot Electrons Could Double Solar Cell Power Efficiency

December 18, 2009

Scientists have experimentally verified a theory suggesting that hot electrons could double the output of solar cells. The researchers, from Boston College, have built solar cells that successfully use hot electrons to increase ...

Silver Nanoparticles Give Polymer Solar Cells A Boost

October 5, 2009

( -- Small bits of metal may play a new role in solar power. Researchers at Ohio State University are experimenting with polymer semiconductors that absorb the sun’s energy and generate electricity. The goal: ...

Affordable solar technology

January 6, 2011

An innovative Oxford company has developed new solar cell technology that is manufactured from cheap, abundant, non-toxic and non-corrosive materials and can be scaled to any volume.

Researchers fabricate more efficient polymer solar cells

December 2, 2010

( -- Researchers from Iowa State University and the Ames Laboratory have developed a process capable of producing a thin and uniform light-absorbing layer on textured substrates that improves the efficiency of ...

'Nanocoax' solves solar cell 'thick and thin' dilemma

June 7, 2010

A nano-scale solar cell inspired by the coaxial cable offers greater efficiency than any previously designed nanotech thin film solar cell by resolving the "thick and thin" challenge inherent to capturing light and extracting ...

Recommended for you

Plasmons triggered in nanotube quantum wells

March 16, 2018

A novel quantum effect observed in a carbon nanotube film could lead to the development of unique lasers and other optoelectronic devices, according to scientists at Rice University and Tokyo Metropolitan University.

Zero field switching (ZFS) effect in a nanomagnetic device

March 16, 2018

An unexpected phenomenon known as zero field switching (ZFS) could lead to smaller, lower-power memory and computing devices than presently possible. The image shows a layering of platinum (Pt), tungsten (W), and a cobalt-iron-boron ...

Imaging technique pulls plasmon data together

March 16, 2018

Rice University scientists have developed a novel technique to view a field of plasmonic nanoparticles simultaneously to learn how their differences change their reactivity.


Adjust slider to filter visible comments by rank

Display comments: newest first

2.2 / 5 (10) Jan 31, 2011
that's fantastic, but this isn't going to happen with the current powers that be running things. Mankind must take revolution and adapt into a society of masters. You can make all the great inventions in the world possible but they don't pan out if business is only interested in making money and pushing wasteful consumption on everyone. Any rational person should be utterly disgusted with the way of the system and do their duty to their children and their families, their fellow man, and just outright reject this dinosaur failure from the past. Every system has failed maybe it's time for the angry people of the world to unite and give these self-appointed diva's all the unilateral boot. Snap out of your sleep, you could all be freeman of the land, but instead are the slave sheep to the corporation of your country.
3.9 / 5 (7) Jan 31, 2011
They already tried that in Russia. Didn't work.
2.5 / 5 (2) Jan 31, 2011
You have to go into "plasmonics" in another article. High Hz? how hi, are there different frequencies for different metals/wavelengths, it sounds like it could be used to analyze light maybe, there is a changing output. Very interested!
not rated yet Feb 01, 2011
Fantastic new technology that could also make space solar power-beaming of energy from the Sun via concentrated microwaves possible, as described in a book I read called Sunstroke by US aerospace engineer David Kagan. This type of applications satellites need super-lightweight materials to offset the weight/load factor into launching them into orbit. Plasmonics may make it possible to tap into the "Light Fantastic" in geosynchronous orbit to end the planet's dependency on fossil fuel.
3.8 / 5 (4) Feb 01, 2011
A simple diagram would have been better than four paragraphs of strange and confusing food analogies.
2.5 / 5 (4) Feb 01, 2011
If we combine the solar cell improvement articles here from the last two years, we now should have an efficiency of 750%. (Pretty good, considering the absolute upper limit is 100%. :-P )

I wonder where all the inventions ultimately go.
1 / 5 (2) Feb 01, 2011
The inventions all go to a massive archive where we store the great non profitable ideas. Then, when society finally plummets into ruin, the governing body that remains will dig them all out and save everybody.....
1 / 5 (1) Feb 01, 2011
Waffly metaphor!
4 / 5 (1) Feb 16, 2011
that's fantastic, but this isn't going to happen with the current powers that be running things. Mankind must take revolution and adapt into a society of masters...your country.

I'm not actually sure what this has to do with the article, or much of anything. I agree that greed is a terrible thing, but companies invest into products that will make them money (i.e. what the people want to buy) so therefore if enough people want a certain product, there will be plenty of funding behind it (trust me I'm no fan of corporations but tearing everything down will hurt the world more than help). Also, realistically people realize that you can't just change infrastructure overnight, rather, its a long a difficult process. I believe that we are making some great progress in the direction of sustainable and environmentally friendly processes. Don't get me wrong I'm definitely not a fan of most corporations, but I recognize that they do have a use for the time being.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.