Faster, cheaper chips from space technology

March 26, 2010, European Space Agency
Italian company Media Lario transfers XMM-Newton mirror technology to EUV lithography for the production of integrated semiconductor circuits, commonly known as microchips. Credits: Media Lario Technologies

( -- Our world is full of integrated semiconductor circuits, commonly known as microchips. Today you find them in computers, cars, mobile phones and in almost every electrical device. Technology from ESA?s XMM-Newton space telescope will make these chips much smaller, faster and cheaper.

The circuits are etched into today’s microchips by ultraviolet light.

The demand for faster and more powerful chips requires the use of extreme ultraviolet (EUV). Much smaller semiconductor circuits can be produced, leading to microchips up to 100 times faster and to with up to 100 times more storage capacity.

However, conventional lenses cannot focus EUV rays. Instead, special ‘grazing-incidence mirrors’ must be used, and it is here that space technology comes in.

Italian company Media Lario Technologies has developed grazing-incidence mirrors to make chips by extending the technology originally used for producing the advanced telescope mirrors for Europe’s XMM-Newton X-ray observatory.

Space telescope produced by highly accurate electroforming technology

Since 1999, XMM-Newton’s telescope has been delivering stunning X-ray images of our Universe.

This is above all due to its exceptional mirrors - the most sensitive ever developed - which total 200 sq m covered by ultra-smooth gold. Statistically, no stick out from the surface by more than their own size.

Media Lario was selected in 1995 to develop these remarkable mirrors. They had to optimise and improve their electroforming and production technology to deliver the modules with the outstanding performance required by ESA.

By completing this “almost impossible mission” in 1998, as the then ESA Director of Science, Prof. Roger Bonnet, described it some years earlier, Media Lario was recognised worldwide for the company’s leading-edge nickel electroforming replication technology.

XMM Newton technology spinoff produces faster chips

“After the successful production of the X-ray telescope for ESA’s XMM-Newton spacecraft, Media Lario continued to extend the technology and searched for advanced applications and markets for this unique capability,” explains Giovanni Nocerino, Media Lario President and CEO.

“Advanced EUV lithography for chip production needed an efficient mechanism for collecting and transporting the EUV light. A unique Media Lario design, which is the ‘microscope’ configuration of the , turned out to be an ideal solution for the EUV collector problem for lithography.”

“The great news is that the semiconductor equipment industry, and consequently semiconductor devices, are making a significant transition to EUV lithography and Media Lario's gracing incidence collector mirror is a key-enabling subsystem of this transition.”

Media Lario’s extreme ultraviolet (EUV) collector mirrors for semiconductor lithography are based on the original investment in the technologies and competences needed to produce the optical mirrors for ESA’s XMM-Newton spacecraft. The EUV collector will be used in the production of the next-generation of faster and smaller integrated semiconductor circuits. Credits: Media Lario Technologies

The EUV collector mirrors for semiconductor lithography are based on the original investment in the technologies and competences needed for XMM-Newton. Highly reflective thin optical mirrors (0.4 mm to 1 mm) can now be produced, with ultra-smooth surfaces having a roughness of less than 0.4 nm which is like a 250-thousandth the width of an average human hair.

Within the next year, equipment with Media Lario’s EUV mirrors is planned to enter pre-production, prior to being used in mass chip manufacturing.

“Media Lario is now the principal developer of such EUV collector mirrors and we are working with Nikon, Canon and ASML, the world’s leading providers of lithography systems for the semiconductor industry,” says Giovanni Nocerino.

According to Frank M. Salzgeber, Head of ESA's Technology Transfer Programme Office, “this is a great example of how a science mission generates leading-edge technology, which is then used for the benefit of daily applications on Earth.”

The European space industry has built up an impressive portfolio of technologies and knowhow. Since 1991, ESA’s Technology Transfer Programme, with its European-wide network of technology brokers, has promoted the use of these technologies beyond space systems. This has provided many innovative solutions for non-space products and services that improve our daily lives.

Explore further: Significant Achievements in Intel's EUV Lithography Program

Related Stories

Significant Achievements in Intel's EUV Lithography Program

August 2, 2004

Intel Corporation today revealed two significant milestones in the development of extreme-ultraviolet (EUV) lithography, a technology for making future microprocessors. The company installed the world's first commercial EUV ...

First XMM-Newton images of impact

July 4, 2005

Images of Comet 9P/Tempel 1 taken by the Optical Monitor on ESA's XMM-Newton observatory, from two minutes before impact and until seven minutes after impact. The first two images were taken just before impact, and in the ...

XMM-Newton scores 1000 top-class science results

January 25, 2006

XMM-Newton, ESA's X-ray observatory, continues its quest for the unknown. This month, after five years of operations, the mission saw the publication of its 1000th scientific paper, corresponding to an equivalent number of ...

Recommended for you

Cryptocurrency rivals snap at Bitcoin's heels

January 14, 2018

Bitcoin may be the most famous cryptocurrency but, despite a dizzying rise, it's not the most lucrative one and far from alone in a universe that counts 1,400 rivals, and counting.

Top takeaways from Consumers Electronics Show

January 13, 2018

The 2018 Consumer Electronics Show, which concluded Friday in Las Vegas, drew some 4,000 exhibitors from dozens of countries and more than 170,000 attendees, showcased some of the latest from the technology world.

Finnish firm detects new Intel security flaw

January 12, 2018

A new security flaw has been found in Intel hardware which could enable hackers to access corporate laptops remotely, Finnish cybersecurity specialist F-Secure said on Friday.

1 comment

Adjust slider to filter visible comments by rank

Display comments: newest first

1.5 / 5 (2) Mar 29, 2010
Impressive article! Its about time that EUV is become on track now. By 2012 many chips will be produced on 22nm node done with the classical lithografy method. But under the 22nm its become more diffucult. We will need new techniques like EUV to extend Moore's law.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.