Racing Ahead at the Speed of Light

February 6, 2008
Racing Ahead at the Speed of Light
RHICs 2.4 mile ring has six intersection points where its two rings of accelerating magnets cross, allowing the particle beams to collide. The collisions produce the fleeting signals that, when captured by one of RHICs experimental detectors, provide physicists with information about the most fundamental workings of nature.

Imagine trying to catch up to something moving close to the speed of light - the fastest anything can move - and sending ahead information in time to make mid-path flight corrections. Impossible? Not quite. Physicists at the Relativistic Heavy Ion Collider (RHIC), a particle accelerator at the U.S. Department of Energy's Brookhaven National Laboratory, have achieved this tricky task - and the results may save the Lab money and time in their quest to understand the inner workings of the early universe.

The physicists have developed a way to measure subtle fluctuations in RHIC's particle beams as they speed around their 2.4-mile-circumference high-tech racetrack - and send that information ahead to specialized devices that smooth the fluctuations when the beam arrives.

"These corrections help to keep the beams focused and colliding, recreating thousands of times a second the conditions that existed just after the Big Bang," said Steven Vigdor, Brookhaven Lab's Associate Laboratory Director for Nuclear and Particle Physics, who manages the RHIC program.

Already, RHIC scientists have learned that mere microseconds after the Big Bang, the universe was more interesting than imagined - a nearly "perfect" liquid with virtually no viscosity and strong interactions among its constituents. With the ability to race ahead of RHIC's beams and keep them focused, the scientists will be able to create many more "mini-Bangs" for study. The increase in data will help them investigate and measure the detailed properties of this "perfect" liquid, and test certain predictions stimulated by an unanticipated link between RHIC findings and "string theory," an appealing approach to incorporate gravity into a unified theory that describes all of Nature's forces.

The beam-correcting technique, called stochastic cooling, has been implemented at accelerators where the beams are made of a continuous stream of particles - but never before at a facility where the particles travel in discrete bunches, as is necessary for the beam-on-beam collisions that take place at RHIC. "Its successful demonstration at RHIC provides an alternative path to the goal of increased collision rates, which would be much more costly and take longer to achieve via other proposed means," Vigdor said.

How it works

RHIC circulates two beams of ions - electrically charged particles - moving in opposite directions in two separate rings at 99.995 percent the speed of light. Within each beam, the ions travel in discrete groups, or "bunches," each containing more than a billion ions.

In the highest-energy experiments, the ions are the nuclei of gold atoms, composed of protons and neutrons that slam together where the two beams cross to produce a tiny speck of extremely hot, dense matter that mimics the conditions of the early universe.

But like all charged particle beams, RHIC's ions tend to spread out (heat up) as they circulate. As the ions spread, the number of protons and neutrons colliding - and the amount of useful data - declines.

So RHIC physicists are taking advantage of RHIC's circular shape and the ability to send signals as fast as the near-light-speed beam to cool the ions down - that is, keep them tightly bunched.

The technique includes the term stochastic (derived from statistics, meaning random) because it relies on measuring the random fluctuations in the beam shape and size. The measurements are made at one point on the accelerator by devices that generate signals proportional to how far the particles are straying from their ideal positions. These devices then send the signals via fiberoptic or microwave links to a position ahead of the speeding beam, where electric fields are generated to "kick" the charged particles back toward their ideal positions. The result: more tightly squeezed, cooler ion bunches.

The signals stay ahead of the beam by taking one of two shortcuts - either traveling from one point to another across the circular accelerator, or by backtracking along the circle to meet the speeding beam about halfway around on its next pass.

So far the RHIC physicists have tested stochastic cooling in the longitudinal direction - along the direction of the beam - in one of RHIC's two rings. Longitudinal cooling compensates for the ion bunches' tendency to lengthen as they circulate. This improvement has already increased RHIC's heavy-ion collision rate by 20 percent. Next, the physicists will test the same cooling system in RHIC's other ring.

With $7 million in additional funding, the physicists will design and build a similar system for correcting the tendency of RHIC's ion bunches also to become "fatter" as they circulate. Computer simulations, which have accurately predicted the achievements of the longitudinal cooling system, predict that combining this new transverse cooling system with longitudinal cooling in both rings and some additional equipment could increase collision rates overall by 500 percent.

"This achievement would compare quite favorably with the goals of our original plan for upgrading collision rates based on a system known as electron cooling, which we estimate would have cost $95 million," said Vigdor. Plus, stochastic cooling can be implemented much more quickly than adding an electron-cooling accelerator because no new construction is required.

"Barring unforeseen budget or technical problems, we hope to implement the full stochastic cooling system by 2011," Vigdor said.

Source: Brookhaven National Laboratory

Explore further: Big chill sets in as RHIC physics heats up

Related Stories

Big chill sets in as RHIC physics heats up

February 4, 2014

If you think it's been cold outside this winter, that's nothing compared to the deep freeze setting in at the Relativistic Heavy Ion Collider (RHIC), the early-universe-recreating "atom smasher" at the U.S. Department of ...

'Perfect' Liquid Hot Enough to be Quark Soup (w/ Video)

February 15, 2010

Recent analyses from the Relativistic Heavy Ion Collider (RHIC), a 2.4-mile-circumference "atom smasher" at the U.S. DOE's Brookhaven National Laboratory, establish that collisions of gold ions traveling at nearly the speed ...

Brewing the world's hottest Guinness

June 27, 2012

( -- The positive and sometimes unexpected impact of particle physics is well documented, from physicists inventing the World Wide Web to engineering the technology underlying life-saving magnetic resonance imaging ...

World's smallest droplet

May 17, 2013

( —Physicists may have created the smallest drops of liquid ever made in the lab. That possibility has been raised by the results of a recent experiment conducted by Vanderbilt physicist Julia Velkovska and her ...

Recommended for you

New CERN results show novel phenomena in proton collisions

April 25, 2017

In a paper published today in Nature Physics , the ALICE collaboration reports that proton collisions sometimes present similar patterns to those observed in the collisions of heavy nuclei. This behaviour was spotted through ...

Chip-based nanoscopy: Microscopy in HD quality

April 24, 2017

Physicists at Bielefeld University and the Arctic University of Norway in Tromsø have developed a photonic chip that makes it possible to carry out super-resolution light microscopy, also called 'nanoscopy,' with conventional ...


Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Feb 06, 2008
"Imagine trying to catch up to something moving close to the speed of light - the fastest anything can move - and sending ahead information in time to make mid-path flight corrections."

Making mid-path flight corrections when traveling near the speed of light would take a lot of energy unless you had some way to measure your position. Of course, the resulting trajectory would be unpredictable so you'd have to measure your position until you had the momentum you wanted. ;-)

Nah, just toying with ideas.... aiming for a small slit with a near light speeding rocket ship is prepostorous! Better aim correctly the first time around.
not rated yet Feb 06, 2008
The author of this article has no idea what they are talking about. They don't "send the corrections ahead in time". There is no time travel involved, which seems to be what the author of this article is insinuating.

Simply put, they are using a circular accelerator. They make a measurement of the errors in the beam, calculate what changes need to be made on average to the beam, and then send the necessary corrections down a cable IN THE DIRECTION OPPOSITE TO THAT OF THE BEAM, to correction instruments that are now in front of the beam, since the beam is travelling in a circle.

Honestly, did the person who wrote this even read the press release, or did they just make a bunch of random stuff up, and then copy and paste a few quotes in? Cause that's what it reads like.
not rated yet Feb 06, 2008
It's ahead of time if you consider the predicted time that the beam will be in a particular place.

No time travel, just prediction and interception.
not rated yet Feb 07, 2008
Follow my train of thought,
is c is the fastest anything can move?
or is it the fastest we can perceive?

It seems to me, just a humble non-physicist,
that the universe is simultaneously generating itself on all scales at every place in space.

It seems to me that the universe moves at the speed of omni!

Tap into the OmniTaneous OmniPoint Energy
not rated yet Feb 09, 2008
"It seems to me, just a humble non-physicist,
that the universe is simultaneously generating itself on all scales"

Thank you. It seems to me that as long as the Universe continues to defy and break our "laws" of physics that we're definitely missing something.

e = mc^2

The speed of light. Squared.

The speed of light. Squared.

The speed of light. Squared?

Yes, maybe I am just that dumb. But it seems to me that if "we" "they" "you" had all the answers, I would have a hoverboard. But I don't, so I can only assume there is a vast plateau of knowledge waiting to be reached.

The speed of light "barrier" is just a limitation ... of Einstein's theory. Much like the speed of light has a maximum momentum, so did Einstein's perspective. He certainly couldn't see everything.

Bottom line is, 2/9/08, 8:19 EST, earls is telling you and the rest of the world the speed of light barrier was built to be broken. And it will be.


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.