Unlocking the Secrets of Titanium, a 'Key' that Assists Hydrogen Storage

July 24, 2004

New research may lead to better catalysts for hydrogen fuel cells

Scientists at the U.S. Department of Energy’s Brookhaven National Laboratory and the New Jersey Institute of Technology have taken steps toward understanding how a titanium compound reacts with a hydrogen-storage material to catalyze the release and re-absorption of hydrogen. Their results, appearing in the July 19, 2004, issue of Applied Physics Letters, may help scientists learn how similar catalysts work, improve their performance, and possibly develop more efficient storage materials for hydrogen fuel cells.

In the late 1990s, scientists discovered that adding, or “doping,” a small amount of titanium to sodium aluminum hydride, a hydrogen storage compound (also known as sodium alanate), allows it to reversibly release and re-absorb hydrogen. In a sense, the titanium acts like a molecular “key,” a crucial component that facilitates hydrogen absorption and allows the reaction to proceed more rapidly. Until now, however, the nature of that reaction was not well understood.

“We found that the titanium resides on the surface of sodium alanate as a titanium aluminum compound called titanium aluminide, rather than entering the bulk material and replacing other atoms or occupying empty spots within the lattice,” said the study’s lead author, Brookhaven physicist Jason Graetz.

To make their finding, Graetz and his collaborators first prepared two titanium-doped samples by mechanically mixing titanium chloride and sodium alanate using a planetary mill, a device that grinds substances together using marble-sized metal spheres. They then prepared two additional samples from each doped sample (for a total of six): a dehydrided sample (containing no absorbed hydrogen) and a hydrided sample. By working with both types, the researchers were able to study the titanium’s properties before and after hydrogen absorption. This gave them one more way to determine the titanium’s role in the reaction.

The group probed the samples with high-energy x-rays at the National Synchrotron Light Source at Brookhaven, a facility that produces intense beams of x-ray, ultraviolet, and infrared light for research. Because every compound and element on Earth absorbs x-rays differently, having a unique “signature,” the researchers were able to compare the six sample signatures to those of different titanium compounds and pure titanium. From this, they determined that the titanium chloride reacted with sodium alanate to form titanium aluminide.

“Our finding is the first step toward an even more interesting discovery: determining exactly how titanium aluminide helps the hydride release and re-absorb hydrogen,” Graetz said. “Understanding that mechanism may help us identify better catalysts for the sodium alanate system and help us find dopants for new compounds that are currently impractical energy-storage materials, due to the high temperatures and pressures required for the release and re-absorption of hydrogen.”

Sodium alanate is one of several metal-based hydrogen storage materials, called metal hydrides, being investigated for use in hydrogen fuel cells. A fuel cell works like a battery: Hydrogen atoms enter the negative terminal and split into their constituent particles, protons and electrons. The protons pass through the cell to the positive terminal, while the electrons leave the cell as a stream of electric current that can power a car or appliance, for example. The electrons then re-enter the cell at the positive terminal and reunite with the protons and oxygen to form water molecules.

The known hydrides are impractical for fuel cells, which require lightweight materials with high storage capacities, because they are quite heavy and have relatively low storage capacities (less than five percent hydrogen by weight). However, they have more potential than compressed hydrogen gas or liquid hydrogen, which pose explosion and freezing risks. These forms of hydrogen must be stored in tanks under very high pressure or at temperatures cold enough to liquefy the oxygen in air.

This research was funded by Brookhaven’s Laboratory Directed Research and Development (LDRD) Program and the National Science Foundation.

Source: Brookhaven National Laboratory

Explore further: Discovery brings renewable fuel production one step closer to reality

Related Stories

Heat-tempered magnesium alloy a strong choice for implants

October 3, 2017

Titanium is the preferred material for surgical fixation procedures ranging from knee replacement to jaw implants. However, since this super-strong metal is not absorbed by the body over time, it can cause complications like ...

The Role of Titanium in Hydrogen Storage

September 2, 2005

As part of ongoing research to make hydrogen a mainstream source of clean, renewable energy, scientists from the U.S. Department of Energy's Brookhaven National Laboratory have determined how titanium atoms help hydrogen ...

Hydrogen storage in nanoparticles works

March 31, 2008

Dutch chemist Kees Baldé has demonstrated that hydrogen can be efficiently stored in nanoparticles. This allows hydrogen storage to be more easily used in mobile applications. Baldé discovered that 30 nanometre particles ...

Recommended for you

New discovery challenges long-held evolutionary theory

October 19, 2017

Monash scientists involved in one of the world's longest evolution experiments have debunked an established theory with a study that provides a 'high-resolution' view of the molecular details of adaptation.

A better way to produce metal-organic frameworks

October 19, 2017

Metal-organic frameworks are porous materials that can absorb incredible amounts of substances, and researchers hope to use them to mop up pollutants or as part of fuel cells that store hydrogen gas.


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.