'We should stop designing perfect circuits'October 2, 2013 in Technology / Semiconductors
Are integrated circuits "too good" for current technological applications? Christian Enz, the new Director of the Institute of Microengineering, backs the idea that perfection is overrated.
Christian Enz, the head of the Integrated Circuits Laboratory (ICLAB), explains why we should build our future devices with unreliable circuits, and adopt the "good enough engineering" trend. Non-fully reliable circuits can lead to a substantial reduction of energy consumption. Even better, they will allow scientists to stay in the miniaturization race, which has been compromised of late. The size of transistors that constitute circuits cannot be reduced boundlessly. As they get smaller and smaller, they produce more and more mistakes. Some hardware must therefore be added and additional margins taken, which annuls the benefits of miniaturization, and increases energy consumption. Imperfect circuits require less silicon area, and are therefore less energy consuming and less expensive. But Industry remains to be convinced, where giving up perfection is concerned.
How is it that sloppy chips don't adversely affect the performance of the device they're in?
Circuits are generally resilient to a certain statistically small proportion of errors, with only a negligible impact on the final output. Of course, this isn't true for all applications, but you can take a "good enough" approach for "perceptual" uses like audio and video playback. For instance, the screen on a smartphone: here, any impact on image quality will be too small to be perceived. Human sight is an extremely robust system, one that automatically corrects any small errors.
How do you build "inexact" circuits?
The crucial step is determining where you have room for error. We start by looking for spots on the circuits that are underutilized. For example, if you have a circuit dedicated to adding numbers and there aren't too many decimals in the numbers being added, we can try to get rid of the part of the circuit that handles decimal places and see what happens. This sort of "inexact" approach will of course lead to lower numbers on quality metrics like signal-to-noise or image quality, but the result will still be "good enough." This decimal-place technique is known as "inexact arithmetics", while more generally, the approach is known as "good-enough engineering".
What are the main advantages of these kinds of circuits?
Initially, we focused on the possibility to reduce energy consumption. Imperfect circuits do make a certain number of errors, but they nevertheless ultimately deliver almost the same performances as "perfect" circuits. We therefore simply tried to replace simple no-fault circuits with "good-enough" circuits that were sufficient for the minimum requirements of a given application. This reduced energy consumption and size; the latter, by decreasing the need for silicon, also drove costs down.
We then realized that the robustness of imperfect circuits could actually help us deal with some of the problems inherent in modern technology, and get past the limits we're currently seeing in miniaturization.
Why has the miniaturization of perfect circuits become so difficult?
For the last four decades, every two years the semiconductor industry has doubled the number of transistors that fit onto a given silicon chip. This is in line with Moore's 1965 prediction. Miniaturization has driven the development of computers, tablets and smartphones that are at once powerful, energy efficient and increasingly compact. Today's transistors measure around 20 nanometers (i.e. 20 millionth of a millimeter). The circuits have become so dense that 100% error-free functionality is simply no longer possible, given the increase in manufacturing tolerances. This means you have to add extra circuits to correct the errors and extend the design margins, but that of course cancels out the space gains you get from miniaturization - and the energy savings. In fact, you can actually end up using more energy this way. In a word, we are beginning to hit a wall on miniaturization.
Is it difficult to promote the "good enough" engineering in the Swiss society?
Yes, because the average product designer hates the idea of getting rid of parts of his circuits and intentionally generating errors. So the standard approach today is to make sure the manufactured circuits correspond exactly to design specs. Our approach is thus completely new. It's a paradigm change, one that is difficult to push through in a society that values perfect technology. That said, the "good enough" approach has been getting some traction in the corporate sector, because chip-makers can't see any real alternative. Intel, for example, is interested in "good enough" engineering. In addition, there are teams of research scientists working on it all over the world.
The team of Christian Enz is working on "inexact" circuits as part of a SNSF project called "IneSoC." The group is building on work done at the CSEM (Swiss Center for Electronics and Microtechnology) as part of an international project undertaken with Rice University in Houston, Texas and Nanyang Technology University in Singapore.
EPFL's Andreas Burg also works on defective chips, but takes a somewhat different approach. Rather than voluntarily putting errors into circuits, Prof. Burg studies ways of "making do" with errors that naturally occur during wireless communication.
Provided by Ecole Polytechnique Federale de Lausanne
"'We should stop designing perfect circuits'" October 2, 2013 http://phys.org/news/2013-10-circuits.html