Discovery of anomalous softening phenomenon and shear bands suppression effect in metallic glassNovember 15th, 2012 in Physics / Condensed Matter
A research team from Japan has discovered an anomalous softening effect in metallic glass, in which the hardness and elastic modulus of the material are reduced remarkably by applying giant shear strain to metallic glass under a high pressure of 5GPa. This research revealed that the shear zones generated in metallic glasses during room temperature deformation are suppressed accompanying this anomalous softening.
Metallic glasses are a type of amorphous metallic material and have excellent properties, such as high strength, high corrosion resistance, soft magnetism, etc. in comparison with ordinary metals. Metallic glasses display these favorable properties because they do not have a periodic structure like that of crystalline metallic materials, and therefore do not have the dislocations and grain boundaries associated with crystal structures. Utilizing these excellent properties, metallic glasses have already been applied to magnetic devices, golf clubs, projection materials for use in shot peening, etc. However, their range of applications had been limited, as metallic glasses lack ductility and are prone to localized deformation when deformed at room temperature.
Using the nanoindentation method, the team headed by Dr. Tsuchiya investigated the changes in the mechanical properties of a disk-shaped specimen of Zr50Cu40Al10 metallic glass when shear strain was applied by the high pressure torsion (HPT) method, in which giant torsional straining is applied under a high pressure of 5GPa at room temperature. As a result, the hardness and modulus of elasticity decreased as deformation increased, and after 50 revolutions of HPT straining, the hardness and elastic modulus of the specimen were markedly decreased to 22% and 30% of the values before straining, respectively. This is attributable to the phenomenon of "structural rejuvenation," in which the atomic level structure of the metallic glass becomes more liquid-likeunder HPT.
Furthermore, when the indentation marks after nanoindentation were observed by scanning probe microscopy (SPM), numerous shear bands could be seen in the area around the indents before straining, but the number of shear bands decreased with increasing HPT straining, and no shear bands were observed after 50 revolution of HPT straining. This shows that localized deformation is suppressed by HPT straining, and the material undergoes a transition to a more homogeneous deformation mode. This discovery suggests the possibility of room temperature formingof metallic glasses, and is considered to enable development of applications to micro-to-nano systems, etc.
These results were published in Applied Physics Letters dated September 20, 2012.
More information: apl.aip.org/resource/1/applab/v101/i12/p121914_s1?bypassSSO=1
Provided by National Institute for Materials Science
"Discovery of anomalous softening phenomenon and shear bands suppression effect in metallic glass." November 15th, 2012. http://phys.org/news/2012-11-discovery-anomalous-softening-phenomenon-bands.html