Hydrogen fuel tech gets boost from low-cost, efficient catalyst

May 2nd, 2011 in Chemistry / Materials Science
A team of researchers have engineered a cheap, abundant alternative to the expensive catalyst platinum and coupled it with a light-absorbing electrode to make hydrogen fuel from sunlight and water. The discovery was published in Nature Materials by theorist Jens Nørskov of the Department of Energy’s SLAC National Accelerator Laboratory and Stanford University and a team of colleagues led by Ib Chorkendorff and Søren Dahl at the Technical University of Denmark. The team optimized a photo-electrochemical water splitting device by designing light absorbers made of silicon arranged in closely packed pillars, imaged above using a scanning electron microscope. After dotting the pillars with tiny clusters of the new catalyst and exposing the pillars to light, researchers watched as hydrogen gas bubbled up -- as quickly as if they'd used costly platinum. Credit: Image courtesy of Christian D. Damsgaard, Thomas Pedersen and Ole Hansen, Technical University of Denmark.


A team of researchers have engineered a cheap, abundant alternative to the expensive catalyst platinum and coupled it with a light-absorbing electrode to make hydrogen fuel from sunlight and water. The discovery was published in Nature Materials by theorist Jens Nørskov of the Department of Energy’s SLAC National Accelerator Laboratory and Stanford University and a team of colleagues led by Ib Chorkendorff and Søren Dahl at the Technical University of Denmark. The team optimized a photo-electrochemical water splitting device by designing light absorbers made of silicon arranged in closely packed pillars, imaged above using a scanning electron microscope. After dotting the pillars with tiny clusters of the new catalyst and exposing the pillars to light, researchers watched as hydrogen gas bubbled up -- as quickly as if they'd used costly platinum. Credit: Image courtesy of Christian D. Damsgaard, Thomas Pedersen and Ole Hansen, Technical University of Denmark.

Scientists have engineered a cheap, abundant alternative to the expensive platinum catalyst and coupled it with a light-absorbing electrode to make hydrogen fuel from sunlight and water.

The discovery is an important development in the worldwide effort to mimic the way plants make fuel from sunlight, a key step in creating a economy. It was reported last week in by theorist Jens Norskov of the Department of Energy's SLAC National Accelerator Laboratory and Stanford University and a team of colleagues led by Ib Chorkendorff and Soren Dahl at the Technical University of Denmark (DTU).

is an energy dense and clean fuel, which upon combustion releases only water. Today, most hydrogen is produced from natural gas which results in large CO2-emissions. An alternative, clean method is to make from sunlight and water. The process is called photo-electrochemical, or PEC, water splitting. When sun hits the PEC cell, the solar energy is absorbed and used for splitting into its components, hydrogen and oxygen.

Progress has so far been limited in part by a lack of cheap catalysts that can speed up the generation of hydrogen and oxygen. A vital part of the American-Danish effort was combining theory and advanced computation with synthesis and testing to accelerate the process of identifying new catalysts. This is a new development in a field that has historically relied on trial and error. "If we can find new ways of rationally designing catalysts, we can speed up the development of new catalytic materials enormously," Nørskov said.

The team first tackled the hydrogen half of the problem. The DTU researchers created a device to harvest the energy from part of the solar spectrum and used it to power the conversion of single hydrogen ions into . However, the process requires a to facilitate the reaction. Platinum is already known as an efficient catalyst, but platinum is too rare and too expensive for widespread use. So the collaborators turned to nature for inspiration.

They investigated hydrogen producing enzymes—natural catalysts—from certain organisms, using a theoretical approach Nørskov's group has been developing to describe catalyst behavior. "We did the calculations," Nørskov explained, "and found out why these enzymes work as well as they do." These studies led them to related compounds, which eventually took them to molybdenum sulfide. "Molybdenum is an inexpensive solution" for catalyzing hydrogen production, Chorkendorff said.

The team also optimized parts of the device, introducing a "chemical solar cell" designed to capture as much solar energy as possible. The experimental researchers at DTU designed light absorbers that consist of silicon arranged in closely packed pillars, and dotted the pillars with tiny clusters of the molybdenum sulfide. When they exposed the pillars to light, hydrogen gas bubbled up—as quickly as if they'd used costly platinum.

The hydrogen gas-generating device is only half of a full photo-electrochemical cell. The other half of the PEC would generate oxygen gas from the water; though hydrogen gas is the goal, without the simultaneous generation of oxygen, the whole PEC cell shuts down. Many groups—including Chorkendorff, Dahl and Nørskov and their colleagues—are working on finding catalysts and sunlight absorbers to do this well. "This is the most difficult half of the problem, and we are attacking this in the same way as we attacked the hydrogen side," Dahl said.

Nørskov looks forward to solving that problem as well. "A sustainable energy choice that no one can afford is not sustainable at all," he said. "I hope this approach will enable us to choose a truly sustainable fuel."

Provided by SLAC National Accelerator Laboratory

"Hydrogen fuel tech gets boost from low-cost, efficient catalyst." May 2nd, 2011. http://phys.org/news/2011-05-hydrogen-fuel-tech-boost-low-cost.html