Quantum cascade diode laser could be vital for safeguarding aircraft

Sep 01, 2006

Terrorists can strike anywhere, at any time, and aircraft, both military and civilian, are targets for heat-seeking missiles, one of many tactics in use by groups hostile to the United States.

Despite their name, heat-seeking missiles actually seek a characteristic infrared light given off by hot objects. Though invisible to the human eye, tiny detectors inside the missiles can detect this infrared light and use it for guidance.

To ensure the safety of aircraft, infrared countermeasure (IRCM) systems are used to confuse or blind the detectors. These systems require a high-power light source that can emit light at the correct wavelength. While various existing light sources may be able to succeed in disrupting the detectors, most are based on technology that is both bulky and expensive. Therefore, only a few military aircraft are now protected by IRCM systems. Developing a compact and inexpensive infrared light source will allow for widespread use of IRCMs, but it has proven to be a significant technical challenge.

A new type of diode laser, called the quantum cascade laser (QCL), may eventually change this situation. Diode lasers are inherently compact and suitable for mass-production, which has led to their widespread and low-cost use in everyday products, including CD and DVD players.

The Center for Quantum Devices (CQD) at Northwestern University, led by Manijeh Razeghi, Walter P. Murphy Professor of Electrical and Computer Engineering, has recently made great strides in laser design, material growth and laser fabrication that have greatly increased the output power and power conversion efficiency of QCLs. The center has now demonstrated individual lasers emitting at wavelengths of 3.8 and 4 microns, capable of up to 1.6 watts of continuous output power at cryogenic temperatures. These lasers have a threshold current density of less than 400 A/cm2 and a power conversion efficiency of 10 percent.

With further development, the researchers at CQD hope to use laser arrays to achieve a continuous output of 10 watts or more. At this wavelength and power level, the lasers could be extremely useful for aircraft protection.

Another significant breakthrough is the ability to operate these 3.8 and 4 micron lasers at room temperature. Room temperature continuous-wave operation has been demonstrated from the same devices with up to 150 milliwatts of output power. This room temperature development makes the lasers attractive for other applications, including early detection of toxic industrial chemicals, explosives and chemical warfare agents.

Source: Northwestern University

Explore further: Professors object to FAA restrictions on drone use

add to favorites email to friend print save as pdf

Related Stories

First in-situ images of void collapse in explosives

5 hours ago

While creating the first-ever images of explosives using an x-ray free electron laser in California, Los Alamos researchers and collaborators demonstrated a crucial diagnostic for studying how voids affect ...

The future of ultrashort laser pulses

Jul 24, 2014

Rapid advances in techniques for the creation of ultra-short laser pulses promise to boost our knowledge of electron motions to an unprecedented level.

Creating optical cables out of thin air

Jul 22, 2014

Imagine being able to instantaneously run an optical cable or fiber to any point on earth, or even into space. That's what Howard Milchberg, professor of physics and electrical and computer engineering at ...

Recommended for you

Hoverbike drone project for air transport takes off

Jul 24, 2014

What happens when you cross a helicopter with a motorbike? The crew at Malloy Aeronautics has been focused on a viable answer and has launched a crowdfunding campaign to support its Hoverbike project, "The ...

User comments : 0