Beam trap full of holes: Researchers develop new surfaces for radar absorption

Sep 09, 2010
The new metamaterials are particularly efficient at absorbing radar radiation through a recurring pattern of copper plates and holes (photo: Arya Fallahi / ETH Zurich)

Swiss researchers from ETH Zurich's Institute for Field Theory and High Frequency Electronics have developed new surfaces for radar absorption. Thanks to this multifaceted application, window panes could even double up as solar panels in future.

Surfaces that absorb radar radiation are used to camouflage military aircraft, ships and buildings. They may also be used to suppress undesired reflections in antenna measurement rooms and of buildings near airports, which would disturb airport radar systems. Preferably made of flat materials, most of them have the drawback of only capturing a narrow range of radar radiation. However, Christian Hafner, a professor at ETH Zurich and his team have now devised a new method to produce surfaces that can absorb radar radiation over an extremely broad range. Moreover, only being a few millimetres thick, the perforated plates are cheap and easy to make.

Combination of antennae and holes

For their breakthrough, the researchers combined various components to form a so-called “metamaterial”. A commercially available, radar-absorbing substrate served as the base material, which they coated in copper geometric structures - in one case in the shape of little Swiss crosses. Patterns like this are known as frequency-selective surfaces as they act like little , which resonate certain frequencies. Near resonance frequencies, they attract much field that is the absorbed in the substrate. The researchers combined the copper patterns with millimetre-sized round holes in the surface, which leads to additional resonances as in so called photonic crystals and further improves the absorption.

Holes, antennae are breakthrough for beam trap
The properties of radar-absorbing materials are tested in the Faraday chamber, which is lined with pyramidal structures to avoid radar reflections on the walls. (Photo: IFH / ETH Zurich)

The important thing is that the size of the structures used corresponds to that of the wavelengths - a few millimetres in the case of radar radiation. Only then are resonances formed that amplify the signal. The more resonances there are, the more effectively the radiation is ultimately absorbed by the base material. By combining frequency surfaces with holes forming a photonic crystal several resonances could be created without increasing the absorber size.

The arrangement is what counts

It’s not only the size and shape of the copper structures and holes that are important for the ideal resonance effect but also their arrangement and position. Combinations of different patterns create resonances that interact and interfere with each other. “Interactions of this kind cannot be predicted intuitively”, explains Christian Hafner. To solve the problem, Arya Fallahi, who recently completed his doctoral thesis in Hafner’s group, has developed new software. It calculates which structure combinations achieve an optimal effect. “The aim was to create metamaterials with specific properties using the computer programme, which is relatively straightforward with radar waves. However, radar absorbers are only a stepping stone for more advanced applications”, says Hafner.

Window panes as solar panels

There are many potential uses for the new metamaterials; they can be adapted to other forms of radiation, such as infrared or solar radiation; and in a modified form, they could be used as a heat shield for turbines or for space travel. However, the structures have to be miniaturised before they can capture solar radiation. The spectrum of sunlight is nanoscale and the wavelength several thousand times smaller than with radar radiation. Consequently, the corresponding metamaterials also need to be nano-structured, which requires more sophisticated technology than for radar and micro-waves.

According to Hafner, it remains to be seen what developments will follow in the solar industry over the next few years. He envisages the use of with electronically controllable properties, which could be used for intelligent windows. Window panes covered in them would work like blinds: when it’s overcast, they’d let light in; and when closed, they’d absorb sunlight and use it to generate power.

Explore further: Researcher's lens turns any smartphone into a portable microscope

More information: Fallahi, Arya. Optimal design of planar metamaterials. ETH (2010). doi:10.3929/ethz-a-006088358

add to favorites email to friend print save as pdf

Related Stories

Scientists create artificial mini 'black hole'

Jun 03, 2010

(PhysOrg.com) -- Scientists from China have built a device that can trap and absorb microwaves coming from all directions with a 99% absorption rate - a property that makes the device simulate, to some extent, ...

Chinese scientists create metamaterial black hole

Oct 16, 2009

(PhysOrg.com) -- Two physicists in China have used metamaterials to create the first artificial electromagnetic black hole. The scientists, Qiang Cheng and Tie Jun Cui from the Southeast University in Nanjing, ...

Radar used to study snow, sleet, rain

Mar 19, 2006

The University of Helsinki has acquired a state-of-the-art polarimetric weather radar to study the physics of rain clouds, snow and sleet.

Next generation lens promises more control

Dec 20, 2009

(PhysOrg.com) -- Duke University engineers have created a new generation of lens that could greatly improve the capabilities of telecommunications or radar systems to provide a wide field of view and greater ...

Space radar to improve miners' safety

Jun 19, 2008

Advanced ground penetration radar, originally developed to investigate the soil structure on the Moon and other planets on ESA planetary missions, is now being used in Canadian mines to spot hidden cracks and weaknesses in ...

Recommended for you

Smart sensor technology to combat indoor air pollution

Apr 14, 2014

Indoor air quality (IAQ) influences the health and well-being of people but for the last 20 years there has been a growing concern about pollutants in closed environments, the difficulty in identifying them ...

User comments : 2

Adjust slider to filter visible comments by rank

Display comments: newest first

baudrunner
not rated yet Sep 09, 2010
Invisibility is almost upon us, but will we ever really know? I can't see it happening.

But seriously, researchers have already developed meta-materials that can render objects invisible to infra-red light. Since radio waves are of a lower frequency, I would think that the kind of stealth described in the article is already fact, and has been for a few years. I guess that Switzerland just wants to be able to do it too.
Skeptic_Heretic
not rated yet Sep 09, 2010
As the wavelength becomes longer or shorter the engineering involved becomes highly difficult. IR wasn't as difficult as long or short wave radiation because of the distance between troughs in the signal.

More news stories

Patent talk: Google sharpens contact lens vision

(Phys.org) —A report from Patent Bolt brings us one step closer to what Google may have in mind in developing smart contact lenses. According to the discussion Google is interested in the concept of contact ...

Tech giants look to skies to spread Internet

The shortest path to the Internet for some remote corners of the world may be through the skies. That is the message from US tech giants seeking to spread the online gospel to hard-to-reach regions.

Wireless industry makes anti-theft commitment

A trade group for wireless providers said Tuesday that the biggest mobile device manufacturers and carriers will soon put anti-theft tools on the gadgets to try to deter rampant smartphone theft.

Making 'bucky-balls' in spin-out's sights

(Phys.org) —A new Oxford spin-out firm is targeting the difficult challenge of manufacturing fullerenes, known as 'bucky-balls' because of their spherical shape, a type of carbon nanomaterial which, like ...

Gene removal could have implications beyond plant science

(Phys.org) —For thousands of years humans have been tinkering with plant genetics, even when they didn't realize that is what they were doing, in an effort to make stronger, healthier crops that endured climates better, ...