New Path To Solar Energy Via Solid-State Photovoltaics

Mar 30, 2010 by Lynn Yarris
These nanoscale images of bismuth ferrite thin films show ordered arrays of 71 degree domain walls (left) and 109 degree doman walls (right). By changing the polarization direction of the bismuth ferrite, these domain walls give rise to the photovoltaic effect. (Image from Seidel, et. al.)

( -- Berkeley Lab researchers have found a new mechanism by which the photovoltaic effect can take place in semiconductor thin-films. This new path to energy production brightens the future for photovoltaic technology by overcoming voltage limitations that plague conventional solid-state solar cells.

A newly discovered path for the conversion of sunlight to electricity could brighten the future for photovoltaic technology. Researchers with Lawrence Berkeley National Laboratory (Berkeley Lab) have found a new mechanism by which the photovoltaic effect can take place in semiconductor thin-films. This new route to energy production overcomes the bandgap voltage limitation that continues to plague conventional solid-state solar cells.

Working with ferrite, a ceramic made from bismuth, iron and oxygen that is multiferroic - meaning it simultaneously displays both ferroelectric and ferromagnetic properties - the researchers discovered that the photovoltaic effect can spontaneously arise at the nanoscale as a result of the ceramic’s rhombohedrally distorted crystal structure. Furthermore, they demonstrated that the application of an electric field makes it possible to manipulate this and thereby control photovoltaic properties.

“We’re excited to find functionality that has not been seen before at the nanoscale in a multiferroic material,” said Jan Seidel, a physicist who holds joint appointments with Berkeley Lab’s Materials Sciences Division and the UC Berkeley Physics Department. “We’re now working on transferring this concept to higher efficiency energy-research related devices.”

Seidel is one of the lead authors of a paper in the journal Nature Nanotechnology that describes this work titled, “Above-bandgap voltages from ferroelectric photovoltaic devices.” Co-authoring this paper with Seidel were Seung-Yeul Yang, Steven Byrnes, Padraic Shafer,Chan-Ho Yang, Marta Rossell, Pu Yu, Ying-Hao Chu, James Scott, Joel Ager, Lane Martin and Ramamoorthy Ramesh.

At the heart of conventional solid-state is a p-n junction, the interface between a semiconductor layer with an abundance of positively-charged “holes,” and a layer with an abundance of negatively charged electrons. When photons from the sun are absorbed, their energy creates electron-hole pairs that can be separated within a “depletion zone,” a microscopic region at the p-n junction measuring only a couple of micrometers across, then collected as electricity. For this process to take place, however, the photons have to penetrate the material to the depletion zone and their energy has to precisely match the energy of the semiconductor’s electronic bandgap - the gap between its valence and conduction energy bands where no electron states can exist.

“The maximum voltage conventional solid-state photovoltaic devices can produce is equal to the energy of their electronic bandgap,” Seidel says. “Even for so called tandem-cells, in which several semiconductor p-n junctions are stacked, photovoltages are still limited because of the finite penetration depth of light into the material.”

Working through Berkeley Lab’s Helios Solar Energy Research Center, Seidel and his collaborators discovered that by applying white light to bismuth ferrite, a material that is both ferroelectric and antiferromagnetic, they could generate photovoltages within submicroscopic areas between one and two nanometers across. These photovoltages were significantly higher than bismuth ferrite’s electronic bandgap.

“The bandgap energy of the bismuth ferrite is equivalent to 2.7 volts. From our measurements we know that with our mechanism we can get approximately 16 volts over a distance of 200 microns. Furthermore, this voltage is in principle linear scalable, which means that larger distances should lead to higher voltages.”

Behind this new mechanism for photovoltage generation are domain walls - two-dimensional sheets that run through a multiferroic and serve as transition zones, separating regions of different ferromagnetic or ferroelectric properties. In their study, Seidel and his collaborators found that these domain walls can serve the same electron-hole separation purpose as depletion zones only with distinct advantages.

“The much smaller scale of these domain walls enables a great many of them to be stacked laterally (sideways) and still be reached by light,” Seidel says. “This in turn makes it possible to increase the photovoltage values well above the electronic bandgap of the material.”

The photovoltaic effect arises because at the domain walls the polarization direction of the bismuth ferrite changes, which leads to steps in the electrostatic potential. Through annealing treatments of the substrate upon which is grown, the material’s rhombohedral crystals can be induced to form domain walls that change the direction of electric field polarization by either 71, 109 or 180 degrees. Seidel and his collaborators measured the photovoltages created by the 71 and 109 degree domain walls.

“The 71 degree domain walls showed unidirectional in-plane polarization alignment and produced an aligned series of potential voltage steps,” Seidel says. “Although the potential step at the 109 degree domain was higher than the 71 degree domain, it showed two variants of the in-plane polarization which ran in opposite directions.”

Seidel and his colleagues were also able to use a 200 volt electric pulse to either reverse the polarity of the photovoltaic effect or turn it off altogether. Such controllability of the photovoltaic effect has never been reported in conventional photovoltaic systems, and it paves the way for new applications in nano-optics and nano-electronics.

“While we have not yet demonstrated these possible new applications and devices, we believe that our research will stimulate concepts and thoughts that are based on this new direction for the photovoltaic effect,” Seidel says.

Explore further: Nanomaterials to preserve ancient works of art

Related Stories

Domain walls that conduct electricity

Jan 29, 2009

The logic and memory functions of future electronic devices could shrink dramatically - to one or two nanometers (billionths of a meter) instead of the many tens of nanometers that characterize today's most ...

Electric Switches Hold Promise for Data Storage

May 22, 2009

( -- Multiferroics are materials in which unique combinations of electric and magnetic properties can simultaneously coexist. They are potential cornerstones in future magnetic data storage and ...

Researchers take the lead out of piezoelectrics

Nov 13, 2009

There is good news for the global effort to reduce the amount of lead in the environment and for the growing array of technologies that rely upon the piezoelectric effect. A lead-free alternative to the current ...

Trapping Sunlight with Silicon Nanowires

Mar 03, 2010

( -- Berkeley Lab researchers have found a better way to trap light in photovoltaic cells through the use of vertical arrays of silicon nanowires. This could substantially cut the costs of solar ...

Bilayer graphene gets a bandgap

Jun 10, 2009

Graphene is the two-dimensional crystalline form of carbon, whose extraordinary electron mobility and other unique features hold great promise for nanoscale electronics and photonics. But there's a catch: ...

Recommended for you

Study shows graphene able to withstand a speeding bullet

13 hours ago

(—A team of researchers working at Rice University in the U.S. has demonstrated that graphene is better able to withstand the impact of a bullet than either steel or Kevlar. In their paper published ...

Nanomaterials to preserve ancient works of art

Nov 27, 2014

Little would we know about history if it weren't for books and works of art. But as time goes by, conserving this evidence of the past is becoming more and more of a struggle. Could this all change thanks ...

Learning anti-microbial physics from cicada

Nov 27, 2014

( —Inspired by the wing structure of a small fly, an NPL-led research team developed nano-patterned surfaces that resist bacterial adhesion while supporting the growth of human cells.

User comments : 2

Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Mar 31, 2010
r u serious? u call this news. physorg is starting to lose credibility with me! this sort of thing is not new.... very misleading. shame on u physorg
not rated yet Apr 02, 2010
This adds a few very interesting details to the story reported over a year out of Rutgers University in http://www.physor...198.html

Research is usually an incremental enterprise, and sometimes progress is slow enough that it is helpful to review what was done before so the non-specialists can recall the context of the new report.

A complete re-run is a different proposition (I can't say "different story"). That's either bad reporting or somebody announcing as new work something that has previously been done. I've seen that a few times on various sites.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.